[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <67600921-a4ea-367e-6b45-c4a1a12ae88b@kernel.org>
Date: Fri, 18 Mar 2022 10:29:03 +0100
From: Krzysztof Kozlowski <krzk@...nel.org>
To: Linus Walleij <linus.walleij@...aro.org>,
Johan Hovold <johan@...nel.org>
Cc: linux-kernel@...r.kernel.org, devicetree@...r.kernel.org
Subject: Re: [PATCH 3/5 v2] dt-bindings: gnss: Rewrite sirfstar binding in
YAML
On 17/03/2022 23:58, Linus Walleij wrote:
> This rewrites the SiRFstar DT bindings in YAML.
>
> Cc: devicetree@...r.kernel.org
> Cc: Krzysztof Kozlowski <krzk@...nel.org>
> Signed-off-by: Linus Walleij <linus.walleij@...aro.org>
> ---
> ChangeLog v1->v2:
> - Change additionalProperties: false to uneavaluatedProperties: false
> so new common properties get available immediately
> - This should also make the checker robot happy about
> lna-supply
> ---
> .../devicetree/bindings/gnss/sirfstar.txt | 46 ------------
> .../devicetree/bindings/gnss/sirfstar.yaml | 71 +++++++++++++++++++
> 2 files changed, 71 insertions(+), 46 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/gnss/sirfstar.txt
> create mode 100644 Documentation/devicetree/bindings/gnss/sirfstar.yaml
>
> diff --git a/Documentation/devicetree/bindings/gnss/sirfstar.txt b/Documentation/devicetree/bindings/gnss/sirfstar.txt
> deleted file mode 100644
> index f4252b6b660b..000000000000
> --- a/Documentation/devicetree/bindings/gnss/sirfstar.txt
> +++ /dev/null
> @@ -1,46 +0,0 @@
> -SiRFstar-based GNSS Receiver DT binding
> -
> -SiRFstar chipsets are used in GNSS-receiver modules produced by several
> -vendors and can use UART, SPI or I2C interfaces.
> -
> -Please see Documentation/devicetree/bindings/gnss/gnss.txt for generic
> -properties.
> -
> -Required properties:
> -
> -- compatible : Must be one of
> -
> - "fastrax,uc430"
> - "linx,r4"
> - "wi2wi,w2sg0004"
> - "wi2wi,w2sg0008i"
> - "wi2wi,w2sg0084i"
> -
> -- vcc-supply : Main voltage regulator (pin name: 3V3_IN, VCC, VDD)
> -
> -Required properties (I2C):
> -- reg : I2C slave address
> -
> -Required properties (SPI):
> -- reg : SPI chip select address
> -
> -Optional properties:
> -
> -- sirf,onoff-gpios : GPIO used to power on and off device (pin name: ON_OFF)
> -- sirf,wakeup-gpios : GPIO used to determine device power state
> - (pin name: RFPWRUP, WAKEUP)
> -- timepulse-gpios : Time pulse GPIO (pin name: 1PPS, TM)
> -
> -Example:
> -
> -serial@...4 {
> - compatible = "ns16550a";
> -
> - gnss {
> - compatible = "wi2wi,w2sg0084i";
> -
> - vcc-supply = <&gnss_reg>;
> - sirf,onoff-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
> - sirf,wakeup-gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
> - };
> -};
> diff --git a/Documentation/devicetree/bindings/gnss/sirfstar.yaml b/Documentation/devicetree/bindings/gnss/sirfstar.yaml
> new file mode 100644
> index 000000000000..9f80add3e61b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/gnss/sirfstar.yaml
> @@ -0,0 +1,71 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/gnss/sirfstar.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: SiRFstar GNSS Receiver Device Tree Bindings
> +
> +allOf:
> + - $ref: gnss-common.yaml#
The allOf should be just before "properties:" (also in patch #2).
> +
> +maintainers:
> + - Johan Hovold <johan@...nel.org>
> +
> +description:
> + The SiRFstar GNSS receivers have incarnated over the years in different
> + chips, starting from the SiRFstarIII which was a chip that was introduced in
> + 2004 and used in a lot of dedicated GPS devices. In 2009 SiRF was acquired
> + by CSR (Cambridge Silicon Radio) and in 2012 the CSR GPS business was
> + acquired by Samsung, while some products remained with CSR. In 2014 CSR
> + was acquired by Qualcomm who still sell some of the SiRF products.
> +
> + SiRF chips can be used over UART, I2C or SPI buses.
> +
> +properties:
> + compatible:
> + enum:
> + - fastrax,uc430
> + - linx,r4
> + - wi2wi,w2sg0004
> + - wi2wi,w2sg0008i
> + - wi2wi,w2sg0084i
> +
> + reg:
> + description:
> + The I2C Address, SPI chip select address. Not required on UART buses.
> +
> + vcc-supply:
> + description:
> + Main voltage regulator, pin names such as 3V3_IN, VCC, VDD.
> +
> + timepulse-gpios:
> + description: Comes with pin names such as 1PPS or TM
You don't need this, I think. It's coming from gnss-common.yaml.
Best regards,
Krzysztof
Powered by blists - more mailing lists