linux-kernel - Re: [PATCH 1/3] arm64: meson: add dts bluetooth node for JetHub H1

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <e32a02a0-1f09-3038-81cb-54c632329dfa@baylibre.com>
Date:   Fri, 25 Mar 2022 18:32:59 +0100
From:   Neil Armstrong <narmstrong@...libre.com>
To:     Vyacheslav Bocharov <adeep@...ina.in>,
        Kevin Hilman <khilman@...libre.com>,
        linux-amlogic@...ts.infradead.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        devicetree@...r.kernel.org
Cc:     Vyacheslav Bocharov <devel@...ina.in>
Subject: Re: [PATCH 1/3] arm64: meson: add dts bluetooth node for JetHub H1

Hi,

On 25/03/2022 17:54, Vyacheslav Bocharov wrote:
> From: Vyacheslav Bocharov <devel@...ina.in>
> 
> Add bluetooth node for RTL8822CS uart to JetHub H1 dts file.
> 
> Signed-off-by: Vyacheslav Bocharov <adeep@...ina.in>
> ---
>   .../boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts  | 5 +++++
>   1 file changed, 5 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
> index 6eafb908695f..a5ee7ed17efa 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
> @@ -213,6 +213,11 @@ &uart_A {
>   	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
>   	pinctrl-names = "default";
>   	uart-has-rtscts;

Please add a blank here to match other DT files.

> +	bluetooth {
> +		compatible = "realtek,rtl8822cs-bt";
> +		enable-gpios  = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
> +		host-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>;
> +       };
>   };
>   
>   &uart_C {