[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1648217145-725-1-git-send-email-quic_vnivarth@quicinc.com>
Date: Fri, 25 Mar 2022 19:35:45 +0530
From: Vijaya Krishna Nivarthi <quic_vnivarth@...cinc.com>
To: agross@...nel.org, bjorn.andersson@...aro.org, robh+dt@...nel.org,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: quic_msavaliy@...cinc.com, dianders@...omium.org,
Vijaya Krishna Nivarthi <quic_vnivarth@...cinc.com>
Subject: [PATCH V2] arm64: dts: qcom: sc7280-idp: Configure cts sleep pinctrl to bias-bus-hold
WLAN rail was leaking power during RBSC/sleep even after turning BT off.
Change sleep pinctrl configuration to handle same.
Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@...cinc.com>
---
v2: used bias-bus-hold as per review comments
v1: intial patch used bias-disable
---
arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index d623d71..80ab2d8 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -516,10 +516,10 @@
pins = "gpio28";
function = "gpio";
/*
- * Configure a pull-down on CTS to match the pull of
- * the Bluetooth module.
+ * Configure a bus-hold on CTS to lower power usage
+ * when BT is turned off.
*/
- bias-pull-down;
+ bias-bus-hold;
};
qup_uart7_sleep_rts: qup-uart7-sleep-rts {
--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, hosted by the Linux Foundation.
Powered by blists - more mailing lists