linux-kernel - Re: [PATCH V2] arm64: dts: qcom: sc7280-idp: Configure cts sleep pinctrl to bias-bus-hold

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAD=FV=X2mF45Fsi+2eSRPfUKa9LCmYSkv8E586aGxPTxC0JsWw@mail.gmail.com>
Date:   Fri, 25 Mar 2022 07:43:20 -0700
From:   Doug Anderson <dianders@...omium.org>
To:     Vijaya Krishna Nivarthi <quic_vnivarth@...cinc.com>
Cc:     Andy Gross <agross@...nel.org>,
        Bjorn Andersson <bjorn.andersson@...aro.org>,
        Rob Herring <robh+dt@...nel.org>,
        linux-arm-msm <linux-arm-msm@...r.kernel.org>,
        "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
        <devicetree@...r.kernel.org>, LKML <linux-kernel@...r.kernel.org>,
        quic_msavaliy@...cinc.com
Subject: Re: [PATCH V2] arm64: dts: qcom: sc7280-idp: Configure cts sleep
 pinctrl to bias-bus-hold

Hi,

On Fri, Mar 25, 2022 at 7:06 AM Vijaya Krishna Nivarthi
<quic_vnivarth@...cinc.com> wrote:
>
> WLAN rail was leaking power during RBSC/sleep even after turning BT off.
> Change sleep pinctrl configuration to handle same.
>
> Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@...cinc.com>
> ---
> v2: used bias-bus-hold as per review comments
> v1: intial patch used bias-disable
> ---
>  arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)

No objections from me now. ...but we should probably be changing _all_
of them? ...and by "all" I mean _both_ the sleep and wake state of the
pins and this config across all the devices. In the very least all the
sc7280 ones, but maybe even the sc7180 ones.

$ git grep "Configure a pull-down on CTS" -- arch/arm64/boot/dts
arch/arm64/boot/dts/qcom/sc7180-idp.dts:                 * Configure a
pull-down on CTS to match the pull of
arch/arm64/boot/dts/qcom/sc7180-idp.dts:                         *
Configure a pull-down on CTS to match the pull of
arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi:            * Configure a
pull-down on CTS to match the pull of
arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi:                    *
Configure a pull-down on CTS to match the pull of
arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts:      *
Configure a pull-down on CTS to match the pull of
arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts:
  * Configure a pull-down on CTS to match the pull of
arch/arm64/boot/dts/qcom/sc7280-idp.dtsi:        * Configure a
pull-down on CTS to match the pull of
arch/arm64/boot/dts/qcom/sc7280-idp.dtsi:                * Configure a
pull-down on CTS to match the pull of
arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi:     /* Configure a
pull-down on CTS to match the pull of the Bluetooth module. */
arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi:              * Configure a
pull-down on CTS to match the pull of

-Doug