lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <2442b460-4c6d-0ac9-af08-ae4c25aed812@roeck-us.net>
Date:   Sat, 26 Mar 2022 18:34:22 -0700
From:   Guenter Roeck <linux@...ck-us.net>
To:     Michael Walle <michael@...le.cc>, Jean Delvare <jdelvare@...e.com>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzk+dt@...nel.org>
Cc:     linux-hwmon@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH v1 4/4] hwmon: add driver for the Microchip LAN966x SoC

On 3/26/22 12:23, Michael Walle wrote:
> Add support for the temperatur sensor and the fan controller on the
> Microchip LAN966x SoC. Apparently, an Analog Bits PVT sensor is used
> which can measure temperature and process voltages. But only a forumlae
> for the temperature sensor is known. Additionally, the SoC support a fan
> tacho input as well as a PWM signal to control the fan.
> 
> Signed-off-by: Michael Walle <michael@...le.cc>
> ---
>   drivers/hwmon/Kconfig         |  12 ++
>   drivers/hwmon/Makefile        |   1 +
>   drivers/hwmon/lan966x-hwmon.c | 384 ++++++++++++++++++++++++++++++++++

Documentation missing

>   3 files changed, 397 insertions(+)
>   create mode 100644 drivers/hwmon/lan966x-hwmon.c
> 
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index 68a8a27ab3b7..4df8521a6f9d 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -814,6 +814,18 @@ config SENSORS_POWR1220
>   	  This driver can also be built as a module. If so, the module
>   	  will be called powr1220.
>   
> +config SENSORS_LAN966X
> +	tristate "Microchip LAN966x Hardware Monitoring"
> +	depends on SOC_LAN966 || COMPILE_TEST
> +	depends on REGMAP
> +	select POLYNOMIAL
> +	help
> +	  If you say yes here you get support for temperature monitoring
> +	  on the Microchip LAN966x SoC.
> +
> +	  This driver can also be built as a module. If so, the module
> +	  will be called lan966x-hwmon.
> +
>   config SENSORS_LINEAGE
>   	tristate "Lineage Compact Power Line Power Entry Module"
>   	depends on I2C
> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
> index 8a03289e2aa4..51ca6956f8b7 100644
> --- a/drivers/hwmon/Makefile
> +++ b/drivers/hwmon/Makefile
> @@ -100,6 +100,7 @@ obj-$(CONFIG_SENSORS_IT87)	+= it87.o
>   obj-$(CONFIG_SENSORS_JC42)	+= jc42.o
>   obj-$(CONFIG_SENSORS_K8TEMP)	+= k8temp.o
>   obj-$(CONFIG_SENSORS_K10TEMP)	+= k10temp.o
> +obj-$(CONFIG_SENSORS_LAN966X)	+= lan966x-hwmon.o
>   obj-$(CONFIG_SENSORS_LINEAGE)	+= lineage-pem.o
>   obj-$(CONFIG_SENSORS_LOCHNAGAR)	+= lochnagar-hwmon.o
>   obj-$(CONFIG_SENSORS_LM63)	+= lm63.o
> diff --git a/drivers/hwmon/lan966x-hwmon.c b/drivers/hwmon/lan966x-hwmon.c
> new file mode 100644
> index 000000000000..e53b47f501ef
> --- /dev/null
> +++ b/drivers/hwmon/lan966x-hwmon.c
> @@ -0,0 +1,384 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +
> +#include <linux/bitfield.h>
> +#include <linux/clk.h>
> +#include <linux/hwmon.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/platform_device.h>
> +#include <linux/polynomial.h>
> +#include <linux/regmap.h>
> +
> +/*
> + * The original translation formulae of the temperature (in degrees of Celsius)
> + * are as follows:
> + *
> + *   T = -3.4627e-11*(N^4) + 1.1023e-7*(N^3) + -1.9165e-4*(N^2) +
> + *       3.0604e-1*(N^1) + -5.6197e1
> + *
> + * where [-56.197, 136.402]C and N = [0, 1023].
> + *
> + * They must be accordingly altered to be suitable for the integer arithmetics.
> + * The technique is called 'factor redistribution', which just makes sure the
> + * multiplications and divisions are made so to have a result of the operations
> + * within the integer numbers limit. In addition we need to translate the
> + * formulae to accept millidegrees of Celsius. Here what it looks like after
> + * the alterations:
> + *
> + *   T = -34627e-12*(N^4) + 110230e-9*(N^3) + -191650e-6*(N^2) +
> + *       306040e-3*(N^1) + -56197
> + *
> + * where T = [-56197, 136402]mC and N = [0, 1023].
> + */
> +
> +static const struct polynomial poly_N_to_temp = {
> +	.terms = {
> +		{4,  -34627, 1000, 1},
> +		{3,  110230, 1000, 1},
> +		{2, -191650, 1000, 1},
> +		{1,  306040, 1000, 1},
> +		{0,  -56197,    1, 1}
> +	}
> +};
> +
> +#define PVT_SENSOR_CTRL		0x0 /* unused */
> +#define PVT_SENSOR_CFG		0x4
> +#define   SENSOR_CFG_CLK_CFG		GENMASK(27, 20)
> +#define   SENSOR_CFG_TRIM_VAL		GENMASK(13, 9)
> +#define   SENSOR_CFG_SAMPLE_ENA		BIT(8)
> +#define   SENSOR_CFG_START_CAPTURE	BIT(7)
> +#define   SENSOR_CFG_CONTINIOUS_MODE	BIT(6)
> +#define   SENSOR_CFG_PSAMPLE_ENA	GENMASK(1, 0)
> +#define PVT_SENSOR_STAT		0x8
> +#define   SENSOR_STAT_DATA_VALID	BIT(10)
> +#define   SENSOR_STAT_DATA		GENMASK(9, 0)
> +
> +#define FAN_CFG			0x0
> +#define   FAN_CFG_DUTY_CYCLE		GENMASK(23, 16)
> +#define   INV_POL			BIT(3)
> +#define   GATE_ENA			BIT(2)
> +#define   PWM_OPEN_COL_ENA		BIT(1)
> +#define   FAN_STAT_CFG			BIT(0)
> +#define FAN_PWM_FREQ		0x4
> +#define   FAN_PWM_CYC_10US		GENMASK(25, 15)
> +#define   FAN_PWM_FREQ_FREQ		GENMASK(14, 0)
> +#define FAN_CNT			0xc
> +#define   FAN_CNT_DATA			GENMASK(15, 0)
> +
> +struct lan966x_hwmon {
> +	struct regmap *regmap_pvt;
> +	struct regmap *regmap_fan;
> +	struct clk *clk;
> +};
> +
> +static int lan966x_hwmon_read_temp(struct device *dev, long *val)
> +{
> +	struct lan966x_hwmon *hwmon = dev_get_drvdata(dev);
> +	unsigned int data;
> +	int ret;
> +
> +	ret = regmap_read(hwmon->regmap_pvt, PVT_SENSOR_STAT, &data);
> +	if (ret < 0)
> +		return ret;
> +
> +	if (!(data & SENSOR_STAT_DATA_VALID))
> +		return -EINVAL;

-ENODATA. The user did not do anything wrong.

> +
> +	*val = polynomial_calc(&poly_N_to_temp,
> +			       FIELD_GET(SENSOR_STAT_DATA, data));
> +
> +	return 0;
> +}
> +
> +static int lan966x_hwmon_read_fan(struct device *dev, long *val)
> +{
> +	struct lan966x_hwmon *hwmon = dev_get_drvdata(dev);
> +	unsigned int data;
> +	int ret;
> +
> +	ret = regmap_read(hwmon->regmap_fan, FAN_CNT, &data);
> +	if (ret < 0)
> +		return ret;
> +
> +	/*
> +	 * Data is given in pulses per second. According to the hwmon ABI we
> +	 * have to assume two pulses per revolution.

The hwmon ABI doesn't make any such assumptions. It wants to see RPM,
that is all. Pulses per revolution is a fan property.

> +	 */
> +	*val = FIELD_GET(FAN_CNT_DATA, data) * 60 / 2;
> +
> +	return 0;
> +}
> +
> +static int lan966x_hwmon_read_pwm(struct device *dev, long *val)
> +{
> +	struct lan966x_hwmon *hwmon = dev_get_drvdata(dev);
> +	unsigned int data;
> +	int ret;
> +
> +	ret = regmap_read(hwmon->regmap_fan, FAN_CFG, &data);
> +	if (ret < 0)
> +		return ret;
> +
> +	*val = FIELD_GET(FAN_CFG_DUTY_CYCLE, data);
> +
> +	return 0;
> +}
> +
> +static int lan966x_hwmon_read_pwm_freq(struct device *dev, long *val)
> +{
> +	struct lan966x_hwmon *hwmon = dev_get_drvdata(dev);
> +	unsigned long rate = clk_get_rate(hwmon->clk);

Is that a dynamic frequency ? If not, it would be better to read it once
and store it in struct lan966x_hwmon.

> +	unsigned int data;
> +	int ret;
> +
> +	ret = regmap_read(hwmon->regmap_fan, FAN_PWM_FREQ, &data);
> +	if (ret < 0)
> +		return ret;
> +
> +	data = FIELD_GET(FAN_PWM_FREQ_FREQ, data);
> +	*val = DIV_ROUND_CLOSEST(rate, 256);

The result of above operation should be stored in a temporary variable.

> +	*val = DIV_ROUND_CLOSEST(*val, data + 1);
> +
> +	return 0;
> +}
> +
> +static int lan966x_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
> +			      u32 attr, int channel, long *val)
> +{
> +
> +	switch (type) {
> +	case hwmon_temp:
> +		return lan966x_hwmon_read_temp(dev, val);
> +	case hwmon_fan:
> +		return lan966x_hwmon_read_fan(dev, val);
> +	case hwmon_pwm:
> +		switch (attr) {
> +		case hwmon_pwm_input:
> +			return lan966x_hwmon_read_pwm(dev, val);
> +		case hwmon_pwm_freq:
> +			return lan966x_hwmon_read_pwm_freq(dev, val);
> +		default:
> +			return -EOPNOTSUPP;
> +		}
> +	default:
> +		return -EOPNOTSUPP;
> +	}
> +}
> +
> +static int lan966x_hwmon_write_pwm(struct device *dev, long val)
> +{
> +	struct lan966x_hwmon *hwmon = dev_get_drvdata(dev);
> +
> +	if (val < 0 || val > 255)
> +		return -EINVAL;
> +
> +	return regmap_update_bits(hwmon->regmap_fan, FAN_CFG,
> +				  FAN_CFG_DUTY_CYCLE,
> +				  FIELD_PREP(FAN_CFG_DUTY_CYCLE, val));
> +}
> +
> +static int lan966x_hwmon_write_pwm_freq(struct device *dev, long val)
> +{
> +	struct lan966x_hwmon *hwmon = dev_get_drvdata(dev);
> +	unsigned long rate = clk_get_rate(hwmon->clk);
> +
> +	val = DIV_ROUND_CLOSEST(rate, val);
> +	val = DIV_ROUND_CLOSEST(val, 256) - 1;
> +	val = clamp_val(val, 0, FAN_PWM_FREQ_FREQ);
> +
> +	return regmap_update_bits(hwmon->regmap_fan, FAN_PWM_FREQ,
> +				  FAN_PWM_FREQ_FREQ,
> +				  FIELD_PREP(FAN_PWM_FREQ_FREQ, val));
> +}
> +
> +static int lan966x_hwmon_write(struct device *dev, enum hwmon_sensor_types type,
> +			       u32 attr, int channel, long val)
> +{
> +	switch (type) {
> +	case hwmon_pwm:
> +		switch (attr) {
> +		case hwmon_pwm_input:
> +			return lan966x_hwmon_write_pwm(dev, val);
> +		case hwmon_pwm_freq:
> +			return lan966x_hwmon_write_pwm_freq(dev, val);
> +		default:
> +			return -EOPNOTSUPP;
> +		}
> +	default:
> +		return -EOPNOTSUPP;
> +	}
> +}
> +
> +static umode_t lan966x_hwmon_is_visible(const void *data,
> +					enum hwmon_sensor_types type,
> +					u32 attr, int channel)
> +{
> +	umode_t mode = 0;
> +
> +	switch (type) {
> +	case hwmon_temp:
> +		switch (attr) {
> +		case hwmon_temp_input:
> +			mode = 0444;
> +			break;
> +		default:
> +			break;
> +		}
> +		break;
> +	case hwmon_fan:
> +		switch (attr) {
> +		case hwmon_fan_input:
> +			mode = 0444;
> +			break;
> +		default:
> +			break;
> +		}
> +		break;
> +	case hwmon_pwm:
> +		switch (attr) {
> +		case hwmon_pwm_input:
> +		case hwmon_pwm_freq:
> +			mode = 0644;
> +			break;
> +		default:
> +			break;
> +		}
> +		break;
> +	default:
> +		break;
> +	}
> +
> +	return mode;
> +}
> +
> +
> +static const struct hwmon_channel_info *lan966x_hwmon_info[] = {
> +	HWMON_CHANNEL_INFO(chip, HWMON_C_REGISTER_TZ),
> +	HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT),
> +	HWMON_CHANNEL_INFO(fan, HWMON_F_INPUT),
> +	HWMON_CHANNEL_INFO(pwm, HWMON_PWM_INPUT | HWMON_PWM_FREQ),
> +	NULL
> +};
> +
> +static const struct hwmon_ops lan966x_hwmon_ops = {
> +	.is_visible = lan966x_hwmon_is_visible,
> +	.read = lan966x_hwmon_read,
> +	.write = lan966x_hwmon_write,
> +};
> +
> +static const struct hwmon_chip_info lan966x_hwmon_chip_info = {
> +	.ops = &lan966x_hwmon_ops,
> +	.info = lan966x_hwmon_info,
> +};
> +
> +static int lan966x_hwmon_enable(struct lan966x_hwmon *hwmon)
> +{
> +	unsigned int mask = SENSOR_CFG_SAMPLE_ENA |
> +			    SENSOR_CFG_START_CAPTURE |
> +			    SENSOR_CFG_CONTINIOUS_MODE |
> +			    SENSOR_CFG_PSAMPLE_ENA;
> +	unsigned int val;
> +
> +	/* enable continuous mode */
> +	val = SENSOR_CFG_SAMPLE_ENA | SENSOR_CFG_CONTINIOUS_MODE;
> +
> +	return regmap_update_bits(hwmon->regmap_pvt, PVT_SENSOR_CFG,
> +				  mask, val);
> +}
> +
> +static struct regmap *lan966x_init_regmap(struct platform_device *pdev,
> +					  const char *name)
> +{
> +	struct regmap_config regmap_config = {
> +		.reg_bits = 32,
> +		.reg_stride = 4,
> +		.val_bits = 32,
> +	};
> +	void __iomem *base;
> +
> +	base = devm_platform_ioremap_resource_byname(pdev, name);
> +	if (IS_ERR(base))
> +		return base;
> +
> +	regmap_config.name = name;
> +
> +	return devm_regmap_init_mmio(&pdev->dev, base, &regmap_config);
> +}
> +
> +static void lan966x_clk_disable(void *data)
> +{
> +	struct lan966x_hwmon *hwmon = data;
> +
> +	clk_disable_unprepare(hwmon->clk);
> +}
> +
> +static int lan966x_clk_enable(struct device *dev, struct lan966x_hwmon *hwmon)
> +{
> +	int ret;
> +
> +	ret = clk_prepare_enable(hwmon->clk);
> +	if (ret)
> +		return ret;
> +
> +	return devm_add_action_or_reset(dev, lan966x_clk_disable, hwmon);
> +}
> +
> +static int lan966x_hwmon_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct lan966x_hwmon *hwmon;
> +	struct device *hwmon_dev;
> +	int ret;
> +
> +	hwmon = devm_kzalloc(dev, sizeof(*hwmon), GFP_KERNEL);
> +	if (!hwmon)
> +		return -ENOMEM;
> +
> +	hwmon->clk = devm_clk_get(dev, NULL);
> +	if (IS_ERR(hwmon->clk))
> +		return dev_err_probe(dev, PTR_ERR(hwmon->clk),
> +				     "failed to get clock\n");
> +
> +	ret = lan966x_clk_enable(dev, hwmon);
> +	if (ret)
> +		return dev_err_probe(dev, ret, "failed to enable clock\n");
> +
> +	hwmon->regmap_pvt = lan966x_init_regmap(pdev, "pvt");
> +	if (IS_ERR(hwmon->regmap_pvt))
> +		return dev_err_probe(dev, PTR_ERR(hwmon->regmap_pvt),
> +				     "failed to get regmap for PVT registers\n");
> +
> +	hwmon->regmap_fan = lan966x_init_regmap(pdev, "fan");
> +	if (IS_ERR(hwmon->regmap_fan))
> +		return dev_err_probe(dev, PTR_ERR(hwmon->regmap_fan),
> +				     "failed to get regmap for fan registers\n");
> +
> +	hwmon_dev = devm_hwmon_device_register_with_info(&pdev->dev,
> +				"lan966x_hwmon", hwmon,
> +				&lan966x_hwmon_chip_info, NULL);
> +	if (IS_ERR(hwmon_dev))
> +		return dev_err_probe(dev, PTR_ERR(hwmon_dev),
> +				     "failed to register hwmon device\n");
> +
> +	return lan966x_hwmon_enable(hwmon);
> +}
> +
> +static const struct of_device_id lan966x_hwmon_of_match[] = {
> +	{ .compatible = "microchip,lan9668-hwmon" },
> +	{}
> +};
> +MODULE_DEVICE_TABLE(of, lan966x_hwmon_of_match);
> +
> +static struct platform_driver lan966x_hwmon_driver = {
> +	.probe = lan966x_hwmon_probe,
> +	.driver = {
> +		.name = "lan966x-hwmon",
> +		.of_match_table = lan966x_hwmon_of_match,
> +	},
> +};
> +module_platform_driver(lan966x_hwmon_driver);
> +
> +MODULE_DESCRIPTION("LAN966x Hardware Monitoring Driver");
> +MODULE_AUTHOR("Michael Walle <michael@...le.cc>");
> +MODULE_LICENSE("GPL");

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ