linux-kernel - [PATCH v2 1/2] ata: Kconfig: Update SATA_LPM

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Mon, 4 Apr 2022 15:02:01 -0500
From:   Mario Limonciello <mario.limonciello@....com>
To:     Damien Le Moal <damien.lemoal@...nsource.wdc.com>
CC:     "open list:LIBATA SUBSYSTEM (Serial and Parallel ATA drivers)" 
        <linux-ide@...r.kernel.org>,
        open list <linux-kernel@...r.kernel.org>,
        <hdegoede@...hat.com>,
        Mario Limonciello <mario.limonciello@....com>
Subject: [PATCH v2 1/2] ata: Kconfig: Update SATA_LPM_POLICY default to "3"

SATA_LPM_POLICY is a "new" configuration item, but it was renamed from
SATA_LPM_MOBILE_POLICY in commit 4dd4d3deb502 ("ata: ahci: Rename
CONFIG_SATA_LPM_MOBILE_POLICY configuration item")

Since the configuration item was renamed it was mentioned that people
might invisibly lose their chosen defaults for it.  This means it's a
good time to evaluate whether those defaults make sense still.

Historically this was set to "0" to prevent problems with power management
on very old drives.  However it's been observed that almost all modern
Linux distributions either set the policy to "3" in the kernel
configuration or update it to this via userspace policy changes. Update
the policy default in the kernel to "3" to match that behavior as well.

Signed-off-by: Mario Limonciello <mario.limonciello@....com>
---
v1->v2:
 * Rebase on 5.18-rc1
 drivers/ata/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index e5641e6c52ee..3ffe14057ed2 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -118,7 +118,7 @@ config SATA_AHCI
 config SATA_LPM_POLICY
 	int "Default SATA Link Power Management policy for low power chipsets"
 	range 0 4
-	default 0
+	default 3
 	depends on SATA_AHCI
 	help
 	  Select the Default SATA Link Power Management (LPM) policy to use
-- 
2.34.1