linux-kernel - [PATCH V9 6/6] arm64: dts: qcom: sc7280: Add pm8008 support for sc7280-idp

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1649166633-25872-7-git-send-email-quic_c_skakit@quicinc.com>
Date:   Tue, 5 Apr 2022 19:20:33 +0530
From:   Satya Priya <quic_c_skakit@...cinc.com>
To:     Bjorn Andersson <bjorn.andersson@...aro.org>,
        Rob Herring <robh+dt@...nel.org>
CC:     Lee Jones <lee.jones@...aro.org>,
        Liam Girdwood <lgirdwood@...il.com>,
        Mark Brown <broonie@...nel.org>,
        <linux-arm-msm@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>, <swboyd@...omium.org>,
        <quic_collinsd@...cinc.com>, <quic_subbaram@...cinc.com>,
        <quic_jprakash@...cinc.com>,
        Satya Priya <quic_c_skakit@...cinc.com>
Subject: [PATCH V9 6/6] arm64: dts: qcom: sc7280: Add pm8008 support for sc7280-idp

Add pm8008 infra and regulators support for sc7280 idp.

Signed-off-by: Satya Priya <quic_c_skakit@...cinc.com>
---
Changes in V6:
 - No changes.

Changes in V7:
 - No Changes.

Changes in V8:
 - Add an extra phandle "pm8008_bus" and then include pm8008 dtsi files inside it.
 - Remove output-high from pm8008_active node.

Changes in V9:
 - Added interrupts properties.

 arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 68 ++++++++++++++++++++++++++++++++
 1 file changed, 68 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index ecbf2b8..6f39c05 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -263,6 +263,65 @@
 	};
 };
 
+pm8008_bus: &i2c1 {
+	status = "okay";
+};
+
+#include "pm8008.dtsi"
+
+&pm8008 {
+	interrupt-parent = <&tlmm>;
+	interrupts = <24 IRQ_TYPE_EDGE_RISING>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pm8008_active>;
+
+	reset-gpios = <&pm8350c_gpios 4 GPIO_ACTIVE_HIGH>;
+};
+
+&pm8008_regulators {
+	vdd_l1_l2-supply = <&vreg_s8b_1p2>;
+	vdd_l3_l4-supply = <&vreg_s1b_1p8>;
+	vdd_l5-supply = <&vreg_bob>;
+	vdd_l6-supply = <&vreg_bob>;
+	vdd_l7-supply = <&vreg_bob>;
+};
+
+&pm8008_l1 {
+	regulator-min-microvolt = <950000>;
+	regulator-max-microvolt = <1300000>;
+};
+
+&pm8008_l2 {
+	regulator-min-microvolt = <950000>;
+	regulator-max-microvolt = <1250000>;
+};
+
+&pm8008_l3 {
+	regulator-min-microvolt = <1650000>;
+	regulator-max-microvolt = <3000000>;
+};
+
+&pm8008_l4 {
+	regulator-min-microvolt = <1504000>;
+	regulator-max-microvolt = <1600000>;
+};
+
+&pm8008_l5 {
+	regulator-min-microvolt = <2600000>;
+	regulator-max-microvolt = <3000000>;
+};
+
+&pm8008_l6 {
+	regulator-min-microvolt = <2600000>;
+	regulator-max-microvolt = <3000000>;
+};
+
+&pm8008_l7 {
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3544000>;
+};
+
 &qfprom {
 	vcc-supply = <&vreg_l1c_1p8>;
 };
@@ -375,6 +434,15 @@
 	drive-strength = <2>;
 };
 
+&pm8350c_gpios {
+	pm8008_active: pm8008-active {
+		pins = "gpio4";
+		function = "normal";
+		bias-disable;
+		power-source = <0>;
+	};
+};
+
 &qspi_cs0 {
 	bias-disable;
 };
-- 
2.7.4