[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <YlWZfioKrHO9tqQv@ripper>
Date: Tue, 12 Apr 2022 08:23:42 -0700
From: Bjorn Andersson <bjorn.andersson@...aro.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Cc: Andy Gross <agross@...nel.org>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Viresh Kumar <vireshk@...nel.org>, Nishanth Menon <nm@...com>,
Alim Akhtar <alim.akhtar@...sung.com>,
Avri Altman <avri.altman@....com>,
"James E.J. Bottomley" <jejb@...ux.ibm.com>,
"Martin K. Petersen" <martin.petersen@...cle.com>,
"Rafael J. Wysocki" <rafael@...nel.org>,
Taniya Das <tdas@...eaurora.org>,
linux-arm-msm@...r.kernel.org, linux-clk@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-pm@...r.kernel.org, linux-scsi@...r.kernel.org
Subject: Re: [RFC PATCH v2 2/6] dt-bindings: opp: accept array of frequencies
On Mon 11 Apr 08:43 PDT 2022, Krzysztof Kozlowski wrote:
> Devices might need to control several clocks when scaling the frequency
> and voltage. Allow passing array of clock frequencies, similarly to the
> voltages.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@...aro.org>
> ---
> Documentation/devicetree/bindings/opp/opp-v2-base.yaml | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/opp/opp-v2-base.yaml b/Documentation/devicetree/bindings/opp/opp-v2-base.yaml
> index 76c8acd981b3..1d7216008f95 100644
> --- a/Documentation/devicetree/bindings/opp/opp-v2-base.yaml
> +++ b/Documentation/devicetree/bindings/opp/opp-v2-base.yaml
> @@ -50,6 +50,14 @@ patternProperties:
> property to uniquely identify the OPP nodes exists. Devices like power
> domains must have another (implementation dependent) property.
>
> + This can be also an array of frequencies for each clock provided to the
> + device. In such case value of 0 means the clock frequency should not
> + be configured for given clock.
> + minItems: 1
> + maxItems: 16
> + items:
> + maxItems: 1
> +
> opp-microvolt:
> description: |
> Voltage for the OPP
> --
> 2.32.0
>
Powered by blists - more mailing lists