| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <ab847b6edb197bffdfe189e70fb4ac76bfe79e0d.1650033747.git.christophe.leroy@csgroup.eu>
Date: Fri, 15 Apr 2022 16:45:13 +0200
From: Christophe Leroy <christophe.leroy@...roup.eu>
To: Andrew Morton <akpm@...ux-foundation.org>
Cc: Christophe Leroy <christophe.leroy@...roup.eu>,
linux-kernel@...r.kernel.org, linux-mm@...ck.org,
Steve Capper <steve.capper@....com>,
Will Deacon <will.deacon@....com>,
Catalin Marinas <catalin.marinas@....com>,
stable@...r.kernel.org
Subject: [PATCH v10] mm, hugetlbfs: Allow for "high" userspace addresses
This is a fix for commit f6795053dac8 ("mm: mmap: Allow for "high"
userspace addresses") for hugetlb.
This patch adds support for "high" userspace addresses that are
optionally supported on the system and have to be requested via a hint
mechanism ("high" addr parameter to mmap).
Architectures such as powerpc and x86 achieve this by making changes to
their architectural versions of hugetlb_get_unmapped_area() function.
However, arm64 uses the generic version of that function.
So take into account arch_get_mmap_base() and arch_get_mmap_end() in
hugetlb_get_unmapped_area(). To allow that, move those two macros
out of mm/mmap.c into include/linux/sched/mm.h
If these macros are not defined in architectural code then they default
to (TASK_SIZE) and (base) so should not introduce any behavioural
changes to architectures that do not define them.
For the time being, only ARM64 is affected by this change.
>From Catalin (ARM64):
We should have fixed hugetlb_get_unmapped_area() as well when we
added support for 52-bit VA. The reason for commit f6795053dac8 was to
prevent normal mmap() from returning addresses above 48-bit by default
as some user-space had hard assumptions about this.
It's a slight ABI change if you do this for hugetlb_get_unmapped_area()
but I doubt anyone would notice. It's more likely that the current
behaviour would cause issues, so I'd rather have them consistent.
Signed-off-by: Christophe Leroy <christophe.leroy@...roup.eu>
Cc: Steve Capper <steve.capper@....com>
Cc: Will Deacon <will.deacon@....com>
Cc: Catalin Marinas <catalin.marinas@....com>
Fixes: f6795053dac8 ("mm: mmap: Allow for "high" userspace addresses")
Cc: <stable@...r.kernel.org> # 5.0.x
Reviewed-by: Catalin Marinas <catalin.marinas@....com>
Acked-by: Andrew Morton <akpm@...ux-foundation.org>
---
Resending the patch as standalone so that is can be merged via mm tree in 5.18 and stable.
v10:
- Moved as first patch of the series so that it can be applied
separately as a flag and be easily applied back on stable.
- Added text from Catalin explaining why it is a fixup.
---
fs/hugetlbfs/inode.c | 9 +++++----
include/linux/sched/mm.h | 8 ++++++++
mm/mmap.c | 8 --------
3 files changed, 13 insertions(+), 12 deletions(-)
diff --git a/fs/hugetlbfs/inode.c b/fs/hugetlbfs/inode.c
index 99c7477cee5c..dd3a088db11d 100644
--- a/fs/hugetlbfs/inode.c
+++ b/fs/hugetlbfs/inode.c
@@ -206,7 +206,7 @@ hugetlb_get_unmapped_area_bottomup(struct file *file, unsigned long addr,
info.flags = 0;
info.length = len;
info.low_limit = current->mm->mmap_base;
- info.high_limit = TASK_SIZE;
+ info.high_limit = arch_get_mmap_end(addr);
info.align_mask = PAGE_MASK & ~huge_page_mask(h);
info.align_offset = 0;
return vm_unmapped_area(&info);
@@ -222,7 +222,7 @@ hugetlb_get_unmapped_area_topdown(struct file *file, unsigned long addr,
info.flags = VM_UNMAPPED_AREA_TOPDOWN;
info.length = len;
info.low_limit = max(PAGE_SIZE, mmap_min_addr);
- info.high_limit = current->mm->mmap_base;
+ info.high_limit = arch_get_mmap_base(addr, current->mm->mmap_base);
info.align_mask = PAGE_MASK & ~huge_page_mask(h);
info.align_offset = 0;
addr = vm_unmapped_area(&info);
@@ -237,7 +237,7 @@ hugetlb_get_unmapped_area_topdown(struct file *file, unsigned long addr,
VM_BUG_ON(addr != -ENOMEM);
info.flags = 0;
info.low_limit = current->mm->mmap_base;
- info.high_limit = TASK_SIZE;
+ info.high_limit = arch_get_mmap_end(addr);
addr = vm_unmapped_area(&info);
}
@@ -251,6 +251,7 @@ hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
struct mm_struct *mm = current->mm;
struct vm_area_struct *vma;
struct hstate *h = hstate_file(file);
+ const unsigned long mmap_end = arch_get_mmap_end(addr);
if (len & ~huge_page_mask(h))
return -EINVAL;
@@ -266,7 +267,7 @@ hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
if (addr) {
addr = ALIGN(addr, huge_page_size(h));
vma = find_vma(mm, addr);
- if (TASK_SIZE - len >= addr &&
+ if (mmap_end - len >= addr &&
(!vma || addr + len <= vm_start_gap(vma)))
return addr;
}
diff --git a/include/linux/sched/mm.h b/include/linux/sched/mm.h
index a80356e9dc69..1ad1f4bfa025 100644
--- a/include/linux/sched/mm.h
+++ b/include/linux/sched/mm.h
@@ -136,6 +136,14 @@ static inline void mm_update_next_owner(struct mm_struct *mm)
#endif /* CONFIG_MEMCG */
#ifdef CONFIG_MMU
+#ifndef arch_get_mmap_end
+#define arch_get_mmap_end(addr) (TASK_SIZE)
+#endif
+
+#ifndef arch_get_mmap_base
+#define arch_get_mmap_base(addr, base) (base)
+#endif
+
extern void arch_pick_mmap_layout(struct mm_struct *mm,
struct rlimit *rlim_stack);
extern unsigned long
diff --git a/mm/mmap.c b/mm/mmap.c
index 3aa839f81e63..313b57d55a63 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -2117,14 +2117,6 @@ unsigned long vm_unmapped_area(struct vm_unmapped_area_info *info)
return addr;
}
-#ifndef arch_get_mmap_end
-#define arch_get_mmap_end(addr) (TASK_SIZE)
-#endif
-
-#ifndef arch_get_mmap_base
-#define arch_get_mmap_base(addr, base) (base)
-#endif
-
/* Get an address range which is currently unmapped.
* For shmat() with addr=0.
*
--
2.35.1
Powered by blists - more mailing lists