| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 25 Apr 2022 09:32:34 -0700
From: Stephen Hemminger <stephen@...workplumber.org>
To: Wells Lu <wellslutw@...il.com>
Cc: davem@...emloft.net, kuba@...nel.org, robh+dt@...nel.org,
netdev@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, p.zabel@...gutronix.de,
pabeni@...hat.com, krzk+dt@...nel.org, roopa@...dia.com,
andrew@...n.ch, edumazet@...gle.com, wells.lu@...plus.com
Subject: Re: [PATCH net-next v9 2/2] net: ethernet: Add driver for Sunplus
SP7021
On Mon, 25 Apr 2022 18:30:40 +0800
Wells Lu <wellslutw@...il.com> wrote:
> +
> +int spl2sw_rx_poll(struct napi_struct *napi, int budget)
> +{
> + struct spl2sw_common *comm = container_of(napi, struct spl2sw_common, rx_napi);
> + struct spl2sw_mac_desc *desc, *h_desc;
> + struct net_device_stats *stats;
> + struct sk_buff *skb, *new_skb;
> + struct spl2sw_skb_info *sinfo;
> + int budget_left = budget;
> + u32 rx_pos, pkg_len;
> + u32 num, rx_count;
> + s32 queue;
> + u32 mask;
> + int port;
> + u32 cmd;
> +
> + /* Process high-priority queue and then low-priority queue. */
> + for (queue = 0; queue < RX_DESC_QUEUE_NUM; queue++) {
> + rx_pos = comm->rx_pos[queue];
> + rx_count = comm->rx_desc_num[queue];
> +
> + for (num = 0; num < rx_count && budget_left; num++) {
> + sinfo = comm->rx_skb_info[queue] + rx_pos;
> + desc = comm->rx_desc[queue] + rx_pos;
> + cmd = desc->cmd1;
> +
> + if (cmd & RXD_OWN)
> + break;
> +
> + port = FIELD_GET(RXD_PKT_SP, cmd);
> + if (port < MAX_NETDEV_NUM && comm->ndev[port])
> + stats = &comm->ndev[port]->stats;
> + else
> + goto spl2sw_rx_poll_rec_err;
> +
> + pkg_len = FIELD_GET(RXD_PKT_LEN, cmd);
> + if (unlikely((cmd & RXD_ERR_CODE) || pkg_len < ETH_ZLEN + 4)) {
> + stats->rx_length_errors++;
> + stats->rx_dropped++;
> + goto spl2sw_rx_poll_rec_err;
> + }
> +
> + dma_unmap_single(&comm->pdev->dev, sinfo->mapping,
> + comm->rx_desc_buff_size, DMA_FROM_DEVICE);
> +
> + skb = sinfo->skb;
> + skb_put(skb, pkg_len - 4); /* Minus FCS */
> + skb->ip_summed = CHECKSUM_NONE;
> + skb->protocol = eth_type_trans(skb, comm->ndev[port]);
> + netif_receive_skb(skb);
> +
> + stats->rx_packets++;
> + stats->rx_bytes += skb->len;
> +
> + /* Allocate a new skb for receiving. */
> + new_skb = netdev_alloc_skb(NULL, comm->rx_desc_buff_size);
> + if (unlikely(!new_skb)) {
> + desc->cmd2 = (rx_pos == comm->rx_desc_num[queue] - 1) ?
> + RXD_EOR : 0;
> + sinfo->skb = NULL;
> + sinfo->mapping = 0;
> + desc->addr1 = 0;
> + goto spl2sw_rx_poll_alloc_err;
> + }
> +
> + sinfo->mapping = dma_map_single(&comm->pdev->dev, new_skb->data,
> + comm->rx_desc_buff_size,
> + DMA_FROM_DEVICE);
> + if (dma_mapping_error(&comm->pdev->dev, sinfo->mapping)) {
> + dev_kfree_skb_irq(new_skb);
> + desc->cmd2 = (rx_pos == comm->rx_desc_num[queue] - 1) ?
> + RXD_EOR : 0;
> + sinfo->skb = NULL;
> + sinfo->mapping = 0;
> + desc->addr1 = 0;
> + goto spl2sw_rx_poll_alloc_err;
> + }
> +
> + sinfo->skb = new_skb;
> + desc->addr1 = sinfo->mapping;
> +
> +spl2sw_rx_poll_rec_err:
> + desc->cmd2 = (rx_pos == comm->rx_desc_num[queue] - 1) ?
> + RXD_EOR | comm->rx_desc_buff_size :
> + comm->rx_desc_buff_size;
> +
> + wmb(); /* Set RXD_OWN after other fields are effective. */
> + desc->cmd1 = RXD_OWN;
> +
> +spl2sw_rx_poll_alloc_err:
> + /* Move rx_pos to next position */
> + rx_pos = ((rx_pos + 1) == comm->rx_desc_num[queue]) ? 0 : rx_pos + 1;
> +
> + budget_left--;
> +
> + /* If there are packets in high-priority queue,
> + * stop processing low-priority queue.
> + */
> + if (queue == 1 && !(h_desc->cmd1 & RXD_OWN))
> + break;
> + }
> +
> + comm->rx_pos[queue] = rx_pos;
> +
> + /* Save pointer to last rx descriptor of high-priority queue. */
> + if (queue == 0)
> + h_desc = comm->rx_desc[queue] + rx_pos;
> + }
> +
> + wmb(); /* make sure settings are effective. */
> + mask = readl(comm->l2sw_reg_base + L2SW_SW_INT_MASK_0);
> + mask &= ~MAC_INT_RX;
> + writel(mask, comm->l2sw_reg_base + L2SW_SW_INT_MASK_0);
> +
> + napi_complete(napi);
> + return 0;
> +}
> +
> +int spl2sw_tx_poll(struct napi_struct *napi, int budget)
> +{
> + struct spl2sw_common *comm = container_of(napi, struct spl2sw_common, tx_napi);
> + struct spl2sw_skb_info *skbinfo;
> + struct net_device_stats *stats;
> + int budget_left = budget;
> + u32 tx_done_pos;
> + u32 mask;
> + u32 cmd;
> + int i;
> +
> + spin_lock(&comm->tx_lock);
> +
> + tx_done_pos = comm->tx_done_pos;
> + while (((tx_done_pos != comm->tx_pos) || (comm->tx_desc_full == 1)) && budget_left) {
> + cmd = comm->tx_desc[tx_done_pos].cmd1;
> + if (cmd & TXD_OWN)
> + break;
> +
> + skbinfo = &comm->tx_temp_skb_info[tx_done_pos];
> + if (unlikely(!skbinfo->skb))
> + goto spl2sw_tx_poll_next;
> +
> + i = ffs(FIELD_GET(TXD_VLAN, cmd)) - 1;
> + if (i < MAX_NETDEV_NUM && comm->ndev[i])
> + stats = &comm->ndev[i]->stats;
> + else
> + goto spl2sw_tx_poll_unmap;
> +
> + if (unlikely(cmd & (TXD_ERR_CODE))) {
> + stats->tx_errors++;
> + } else {
> + stats->tx_packets++;
> + stats->tx_bytes += skbinfo->len;
> + }
> +
> +spl2sw_tx_poll_unmap:
> + dma_unmap_single(&comm->pdev->dev, skbinfo->mapping, skbinfo->len,
> + DMA_TO_DEVICE);
> + skbinfo->mapping = 0;
> + dev_kfree_skb_irq(skbinfo->skb);
> + skbinfo->skb = NULL;
> +
> +spl2sw_tx_poll_next:
> + /* Move tx_done_pos to next position */
> + tx_done_pos = ((tx_done_pos + 1) == TX_DESC_NUM) ? 0 : tx_done_pos + 1;
> +
> + if (comm->tx_desc_full == 1)
> + comm->tx_desc_full = 0;
> +
> + budget_left--;
> + }
> +
> + comm->tx_done_pos = tx_done_pos;
> + if (!comm->tx_desc_full)
> + for (i = 0; i < MAX_NETDEV_NUM; i++)
> + if (comm->ndev[i])
> + if (netif_queue_stopped(comm->ndev[i]))
> + netif_wake_queue(comm->ndev[i]);
> +
> + spin_unlock(&comm->tx_lock);
> +
> + wmb(); /* make sure settings are effective. */
> + mask = readl(comm->l2sw_reg_base + L2SW_SW_INT_MASK_0);
> + mask &= ~MAC_INT_TX;
> + writel(mask, comm->l2sw_reg_base + L2SW_SW_INT_MASK_0);
> +
> + napi_complete(napi);
> + return 0;
> +}
This doesn't look like it is doing NAPI properly.
The driver is supposed to return the amount of packets processed.
If budget is used, it should return budget.
Powered by blists - more mailing lists