Message-ID: <YmsCfHf/HMuqBkTk@iweiny-server>
Date:   Thu, 28 Apr 2022 14:09:38 -0700
From:   ira.weiny@...el.com
To:     Jonathan Cameron <Jonathan.Cameron@...wei.com>
Cc:     Dan Williams <dan.j.williams@...el.com>,
        Bjorn Helgaas <bhelgaas@...gle.com>,
        Alison Schofield <alison.schofield@...el.com>,
        Vishal Verma <vishal.l.verma@...el.com>,
        Ben Widawsky <ben.widawsky@...el.com>,
        linux-kernel@...r.kernel.org, linux-cxl@...r.kernel.org,
        linux-pci@...r.kernel.org
Subject: Re: [PATCH V8 04/10] cxl/pci: Create auxiliary devices for each DOE
 mailbox

On Wed, Apr 27, 2022 at 06:19:42PM +0100, Jonathan Cameron wrote:
> On Thu, 14 Apr 2022 13:32:31 -0700
> ira.weiny@...el.com wrote:
> 
> > From: Ira Weiny <ira.weiny@...el.com>
> > 
> > CXL kernel drivers optionally need to access DOE mailbox capabilities.
> > Access to mailboxes for things such as CDAT, SPDM, and IDE are needed by
> > the kernel while other access is designed towards user space usage.  An
> > example of this is for CXL Compliance Testing (see CXL 2.0 14.16.4
> > Compliance Mode DOE) which offers a mechanism to set different test
> > modes for a device.
> > 
> > There is no anticipated need for the kernel to share an individual
> > mailbox with user space.  Thus developing an interface to marshal access
> > between the kernel and user space for a single mailbox is unnecessary
> > overhead.  However, having the kernel relinquish some mailboxes to be
> > controlled by user space is a reasonable compromise to share access to
> > the device.
> > 
> > The auxiliary bus provides an elegant solution for this.  Each DOE
> > capability is given its own auxiliary device.  This device is controlled
> > by a kernel driver by default which restricts access to the mailbox.
> > Unbinding the driver from a single auxiliary device (DOE mailbox
> > capability) frees the mailbox for user space access.  This architecture
> > also allows a clear picture on which mailboxes are kernel controlled vs
> > not.
> > 
> > Iterate each DOE mailbox capability and create auxiliary bus devices.
> > Follow on patches will define a driver for the newly created devices.
> > 
> > sysfs shows the devices.
> > 
> > $ ls -l /sys/bus/auxiliary/devices/
> > total 0
> > lrwxrwxrwx 1 root root 0 Mar 24 10:47 cxl_pci.doe.0 -> ../../../devices/pci0000:bf/0000:bf:00.0/0000:c0:00.0/cxl_pci.doe.0
> > lrwxrwxrwx 1 root root 0 Mar 24 10:47 cxl_pci.doe.1 -> ../../../devices/pci0000:bf/0000:bf:01.0/0000:c1:00.0/cxl_pci.doe.1
> > lrwxrwxrwx 1 root root 0 Mar 24 10:47 cxl_pci.doe.2 -> ../../../devices/pci0000:35/0000:35:00.0/0000:36:00.0/cxl_pci.doe.2
> > lrwxrwxrwx 1 root root 0 Mar 24 10:47 cxl_pci.doe.3 -> ../../../devices/pci0000:35/0000:35:01.0/0000:37:00.0/cxl_pci.doe.3
> > lrwxrwxrwx 1 root root 0 Mar 24 10:47 cxl_pci.doe.4 -> ../../../devices/pci0000:35/0000:35:00.0/0000:36:00.0/cxl_pci.doe.4
> > lrwxrwxrwx 1 root root 0 Mar 24 10:47 cxl_pci.doe.5 -> ../../../devices/pci0000:bf/0000:bf:00.0/0000:c0:00.0/cxl_pci.doe.5
> > lrwxrwxrwx 1 root root 0 Mar 24 10:47 cxl_pci.doe.6 -> ../../../devices/pci0000:35/0000:35:01.0/0000:37:00.0/cxl_pci.doe.6
> > lrwxrwxrwx 1 root root 0 Mar 24 10:47 cxl_pci.doe.7 -> ../../../devices/pci0000:bf/0000:bf:01.0/0000:c1:00.0/cxl_pci.doe.7
> > 
> > Signed-off-by: Ira Weiny <ira.weiny@...el.com>
> 
> I'm not 100% happy with effectively having one solution for CXL
> and probably a different one for DOEs on switch ports
> (which I just hacked into a port service driver to convince
> myself there was at least one plausible way of doing that) but if
> this effectively separates the two discussions then I guess I can
> live with it for now ;)

I took some time this morning to mull this over and talk to Dan...

:-(

Truthfully the aux driver does very little except provide a way for admins to
trigger the driver to stop/start accessing the Mailbox.

I suppose a simple sysfs interface could be done to do the same?

I'll let Dan weigh in here.

> 
> Once this is merged we can start the discussion about how to
> handle switch ports with DOEs both for CDAT and SPDM.

I'm ok with that too.  However, I was thinking that this was not a user ABI.
But it really is.  If user space starts writing script to unbind drivers and
then we drop the aux driver support it will break them...

> 
> I'll send out an RFC that is so hideous it will get people to
> suggestion how to do it better!

I think I'd like to see that.

> Currently it starts and
> stops the mailbox 3 times in the registration path and I think
> it's more luck than judgement that is landing me with the right
> MSI.
> 
> Anyhow, this looks good to me.
> 
> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@...wei.com>

Thanks!

The good news is that the main support for the algorithm is now just part of
the pci core as library functions.  I think this discussion is a pretty
light lift to move the calls to those around...

Ira

> 
> 
> > 
> > ---
> > Changes from V7:
> > 	Minor code clean ups
> > 	Rebased on cxl-pending
> > 
> > Changes from V6:
> > 	Move all the auxiliary device stuff to the CXL layer
> > 
> > Changes from V5:
> > 	Split the CXL specific stuff off from the PCI DOE create
> > 	auxiliary device code.
> > ---
> >  drivers/cxl/Kconfig  |   1 +
> >  drivers/cxl/cxlpci.h |  21 +++++++
> >  drivers/cxl/pci.c    | 127 +++++++++++++++++++++++++++++++++++++++++++
> >  3 files changed, 149 insertions(+)
> > 
> > diff --git a/drivers/cxl/Kconfig b/drivers/cxl/Kconfig
> > index f64e3984689f..ac0f5ca95431 100644
> > --- a/drivers/cxl/Kconfig
> > +++ b/drivers/cxl/Kconfig
> > @@ -16,6 +16,7 @@ if CXL_BUS
> >  config CXL_PCI
> >  	tristate "PCI manageability"
> >  	default CXL_BUS
> > +	select AUXILIARY_BUS
> >  	help
> >  	  The CXL specification defines a "CXL memory device" sub-class in the
> >  	  PCI "memory controller" base class of devices. Device's identified by
> > diff --git a/drivers/cxl/cxlpci.h b/drivers/cxl/cxlpci.h
> > index 329e7ea3f36a..2ad8715173ce 100644
> > --- a/drivers/cxl/cxlpci.h
> > +++ b/drivers/cxl/cxlpci.h
> > @@ -2,6 +2,7 @@
> >  /* Copyright(c) 2020 Intel Corporation. All rights reserved. */
> >  #ifndef __CXL_PCI_H__
> >  #define __CXL_PCI_H__
> > +#include <linux/auxiliary_bus.h>
> >  #include <linux/pci.h>
> >  #include "cxl.h"
> >  
> > @@ -72,4 +73,24 @@ static inline resource_size_t cxl_regmap_to_base(struct pci_dev *pdev,
> >  }
> >  
> >  int devm_cxl_port_enumerate_dports(struct cxl_port *port);
> > +
> > +/**
> > + * struct cxl_doe_dev - CXL DOE auxiliary bus device
> > + *
> > + * @adev: Auxiliary bus device
> > + * @pdev: PCI device this belongs to
> > + * @cap_offset: Capability offset
> > + * @use_irq: Set if IRQs are to be used with this mailbox
> > + *
> > + * This represents a single DOE mailbox device.  CXL devices should create this
> > + * device and register it on the Auxiliary bus for the CXL DOE driver to drive.
> > + */
> > +struct cxl_doe_dev {
> > +	struct auxiliary_device adev;
> > +	struct pci_dev *pdev;
> > +	int cap_offset;
> > +	bool use_irq;
> > +};
> > +#define DOE_DEV_NAME "doe"
> > +
> >  #endif /* __CXL_PCI_H__ */
> > diff --git a/drivers/cxl/pci.c b/drivers/cxl/pci.c
> > index e7ab9a34d718..41a6f3eb0a5c 100644
> > --- a/drivers/cxl/pci.c
> > +++ b/drivers/cxl/pci.c
> > @@ -8,6 +8,7 @@
> >  #include <linux/mutex.h>
> >  #include <linux/list.h>
> >  #include <linux/pci.h>
> > +#include <linux/pci-doe.h>
> >  #include <linux/io.h>
> >  #include "cxlmem.h"
> >  #include "cxlpci.h"
> > @@ -564,6 +565,128 @@ static void cxl_dvsec_ranges(struct cxl_dev_state *cxlds)
> >  	info->ranges = __cxl_dvsec_ranges(cxlds, info);
> >  }
> >  
> > +static void cxl_pci_free_irq_vectors(void *data)
> > +{
> > +	pci_free_irq_vectors(data);
> > +}
> > +
> > +static DEFINE_IDA(pci_doe_adev_ida);
> > +
> > +static void cxl_pci_doe_dev_release(struct device *dev)
> > +{
> > +	struct auxiliary_device *adev = container_of(dev,
> > +						struct auxiliary_device,
> > +						dev);
> > +	struct cxl_doe_dev *doe_dev = container_of(adev, struct cxl_doe_dev,
> > +						   adev);
> > +
> > +	ida_free(&pci_doe_adev_ida, adev->id);
> > +	kfree(doe_dev);
> > +}
> > +
> > +static void cxl_pci_doe_destroy_device(void *ad)
> > +{
> > +	auxiliary_device_delete(ad);
> > +	auxiliary_device_uninit(ad);
> > +}
> > +
> > +/**
> > + * cxl_pci_create_doe_devices - Create auxiliary bus DOE devices for all DOE
> > + *				mailboxes found
> > + *
> > + * @pci_dev: The PCI device to scan for DOE mailboxes
> > + *
> > + * There is no coresponding destroy of these devices.  This function associates
> > + * the DOE auxiliary devices created with the pci_dev passed in.  That
> > + * association is device managed (devm_*) such that the DOE auxiliary device
> > + * lifetime is always less than or equal to the lifetime of the pci_dev.
> > + *
> > + * RETURNS: 0 on success -ERRNO on failure.
> > + */
> > +static int cxl_pci_create_doe_devices(struct pci_dev *pdev)
> > +{
> > +	struct device *dev = &pdev->dev;
> > +	bool use_irq = true;
> > +	int irqs = 0;
> > +	u16 off = 0;
> > +	int rc;
> > +
> > +	pci_doe_for_each_off(pdev, off)
> > +		irqs++;
> > +	pci_info(pdev, "Found %d DOE mailbox's\n", irqs);
> > +
> > +	/*
> > +	 * Allocate enough vectors for the DOE's
> > +	 */
> > +	rc = pci_alloc_irq_vectors(pdev, irqs, irqs, PCI_IRQ_MSI |
> > +						     PCI_IRQ_MSIX);
> > +	if (rc != irqs) {
> > +		pci_err(pdev,
> > +			"Not enough interrupts for all the DOEs; use polling\n");
> > +		use_irq = false;
> > +		/* Some got allocated; clean them up */
> > +		if (rc > 0)
> > +			cxl_pci_free_irq_vectors(pdev);
> > +	} else {
> > +		/*
> > +		 * Enabling bus mastering is require for MSI/MSIx.  It could be
> > +		 * done later within the DOE initialization, but as it
> > +		 * potentially has other impacts keep it here when setting up
> > +		 * the IRQ's.
> > +		 */
> > +		pci_set_master(pdev);
> > +		rc = devm_add_action_or_reset(dev,
> > +					      cxl_pci_free_irq_vectors,
> > +					      pdev);
> > +		if (rc)
> > +			return rc;
> > +	}
> > +
> > +	pci_doe_for_each_off(pdev, off) {
> > +		struct auxiliary_device *adev;
> > +		struct cxl_doe_dev *new_dev;
> > +		int id;
> > +
> > +		new_dev = kzalloc(sizeof(*new_dev), GFP_KERNEL);
> > +		if (!new_dev)
> > +			return -ENOMEM;
> > +
> > +		new_dev->pdev = pdev;
> > +		new_dev->cap_offset = off;
> > +		new_dev->use_irq = use_irq;
> > +
> > +		/* Set up struct auxiliary_device */
> > +		adev = &new_dev->adev;
> > +		id = ida_alloc(&pci_doe_adev_ida, GFP_KERNEL);
> > +		if (id < 0) {
> > +			kfree(new_dev);
> > +			return -ENOMEM;
> > +		}
> > +
> > +		adev->id = id;
> > +		adev->name = DOE_DEV_NAME;
> > +		adev->dev.release = cxl_pci_doe_dev_release;
> > +		adev->dev.parent = dev;
> > +
> > +		if (auxiliary_device_init(adev)) {
> > +			cxl_pci_doe_dev_release(&adev->dev);
> > +			return -EIO;
> > +		}
> > +
> > +		if (auxiliary_device_add(adev)) {
> > +			auxiliary_device_uninit(adev);
> > +			return -EIO;
> > +		}
> > +
> > +		rc = devm_add_action_or_reset(dev, cxl_pci_doe_destroy_device,
> > +					      adev);
> > +		if (rc)
> > +			return rc;
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> >  static int cxl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
> >  {
> >  	struct cxl_register_map map;
> > @@ -630,6 +753,10 @@ static int cxl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
> >  	if (rc)
> >  		return rc;
> >  
> > +	rc = cxl_pci_create_doe_devices(pdev);
> > +	if (rc)
> > +		return rc;
> > +
> >  	cxl_dvsec_ranges(cxlds);
> >  
> >  	cxlmd = devm_cxl_add_memdev(cxlds);
> 

Powered by blists - more mailing lists