| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20220428212723.GA44322@bhelgaas>
Date: Thu, 28 Apr 2022 16:27:23 -0500
From: Bjorn Helgaas <helgaas@...nel.org>
To: ira.weiny@...el.com
Cc: Dan Williams <dan.j.williams@...el.com>,
Bjorn Helgaas <bhelgaas@...gle.com>,
Jonathan Cameron <Jonathan.Cameron@...wei.com>,
Christoph Hellwig <hch@...radead.org>,
Alison Schofield <alison.schofield@...el.com>,
Vishal Verma <vishal.l.verma@...el.com>,
Ben Widawsky <ben.widawsky@...el.com>,
linux-kernel@...r.kernel.org, linux-cxl@...r.kernel.org,
linux-pci@...r.kernel.org
Subject: Re: [PATCH V8 03/10] PCI: Create PCI library functions in support of
DOE mailboxes.
On Thu, Apr 14, 2022 at 01:32:30PM -0700, ira.weiny@...el.com wrote:
> From: Jonathan Cameron <Jonathan.Cameron@...wei.com>
>
> Introduced in a PCI v6.0[1], DOE provides a config space based mailbox
Introduced in PCIe r6.0, sec 6.30, DOE ...
> with standard protocol discovery. Each mailbox is accessed through a
> DOE Extended Capability.
>
> Each DOE mailbox must support the DOE discovery protocol in addition to
> any number of additional protocols.
>
> Define core PCI functionality to manage a single PCI DOE mailbox at a
> defined config space offset. Functionality includes creating, supported
> protocol queries, submit tasks to, and destroying the new state objects.
>
> If interrupts are desired, interrupts vectors should be allocated prior
> to asking for irq's when creating a mailbox object.
IRQs
> [1] https://members.pcisig.com/wg/PCI-SIG/document/16609
The link is only useful for PCI-SIG members, and only as long as the
SIG maintains this structure. I think "PCIe r6.0" is sufficient.
> Cc: Christoph Hellwig <hch@...radead.org>
> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@...wei.com>
> Co-developed-by: Ira Weiny <ira.weiny@...el.com>
> Signed-off-by: Ira Weiny <ira.weiny@...el.com>
Acked-by: Bjorn Helgaas <bhelgaas@...gle.com>
Minor comments below.
> ---
> Changes from V7
> Add a Kconfig for this functionality
> Fix bug in pci_doe_supports_prot()
> Rebased on cxl-pending
>
> Changes from V6
> Clean up signed off by lines
> Make this functionality all PCI library functions
> Clean up header files
> s/pci_doe_irq/pci_doe_irq_handler
> Use pci_{request,free}_irq
> Remove irq_name (maintained by pci_request_irq)
> Fix checks to use an irq
> Consistently use u16 for cap_offset
> Cleanup kdocs and comments
> Create a helper retire_cur_task() to handle locking of the
> current task pointer.
> Remove devm_ calls from PCI layer.
> The devm_ calls do not allow for the pci_doe_mb objects
> to be tied to an auxiliary device. Leave it to the
> caller to use devm_ if desired.
> From Dan Williams
> s/cb/end_task/; Pass pci_doe_task to end_task
> Clarify exchange/task/request/response.
> Merge pci_doe_task and pci_doe_exchange into
> pci_doe_task which represents a single
> request/response task for the state machine to
> process.
> Simplify submitting work to the mailbox
> Replace pci_doe_exchange_sync() with
> pci_doe_submit_task() Consumers of the mailbox
> are now responsible for setting up callbacks
> within a task object and submitting them to the
> mailbox to be processed.
> Remove WARN_ON when task != NULL and be sure to abort that task.
> Convert abort/dead to atomic flags
> s/state_lock/task_lock to better define what the lock is
> protecting
> Remove all the auxiliary bus code from the PCI layer
> The PCI layer provides helpers to use the DOE
> Mailboxes. Each subsystem can then use the
> helpers as they see fit. The CXL layer in this
> series uses aux devices to manage the new
> pci_doe_mb objects.
>
> From Bjorn
> Clarify the fact that DOE mailboxes are capabilities of
> the device.
> Code clean ups
> Cleanup Makefile
> Update references to PCI SIG spec v6.0
> Move this attribution here:
> This code is based on Jonathan's V4 series here:
> https://lore.kernel.org/linux-cxl/20210524133938.2815206-1-Jonathan.Cameron@huawei.com/
>
> Changes from V5
> From Bjorn
> s/pci_WARN/pci_warn
> Add timeout period to print
> Trim to 80 chars
> Use Tabs for DOE define spacing
> Use %#x for clarity
> From Jonathan
> Addresses concerns about the order of unwinding stuff
> s/doe/doe_dev in pci_doe_exhcnage_sync
> Correct kernel Doc comment
> Move pci_doe_task_complete() down in the file.
> Rework pci_doe_irq()
> process STATUS_ERROR first
> Return IRQ_NONE if the irq is not processed
> Use PCI_DOE_STATUS_INT_STATUS explicitly to
> clear the irq
> Clean up goto label s/err_free_irqs/err_free_irq
> use devm_kzalloc for doe struct
> clean up error paths in pci_doe_probe
> s/pci_doe_drv/pci_doe
> remove include mutex.h
> remove device name and define, move it in the next patch which uses it
> use devm_kasprintf() for irq_name
> use devm_request_irq()
> remove pci_doe_unregister()
> [get/put]_device() were unneeded and with the use of
> devm_* this function can be removed completely.
> refactor pci_doe_register and s/pci_doe_register/pci_doe_reg_irq
> make this function just a registration of the irq and
> move pci_doe_abort() into pci_doe_probe()
> use devm_* to allocate the protocol array
>
> Changes from Jonathan's V4
> Move the DOE MB code into the DOE auxiliary driver
> Remove Task List in favor of a wait queue
>
> Changes from Ben
> remove CXL references
> propagate rc from pci functions on error
>
> squash: make PCI_DOE optional based on selecting by those who need it.
>
> squash: Create PCI library functions
>
> Fix bug in protocol support check
> ---
> drivers/pci/Kconfig | 3 +
> drivers/pci/Makefile | 1 +
> drivers/pci/pci-doe.c | 607 ++++++++++++++++++++++++++++++++++
> include/linux/pci-doe.h | 119 +++++++
> include/uapi/linux/pci_regs.h | 29 +-
> 5 files changed, 758 insertions(+), 1 deletion(-)
> create mode 100644 drivers/pci/pci-doe.c
> create mode 100644 include/linux/pci-doe.h
>
> diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
> index 133c73207782..b2f2e588a817 100644
> --- a/drivers/pci/Kconfig
> +++ b/drivers/pci/Kconfig
> @@ -121,6 +121,9 @@ config XEN_PCIDEV_FRONTEND
> config PCI_ATS
> bool
>
> +config PCI_DOE
> + bool
> +
> config PCI_ECAM
> bool
>
> diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
> index 0da6b1ebc694..b609d8ad813d 100644
> --- a/drivers/pci/Makefile
> +++ b/drivers/pci/Makefile
> @@ -31,6 +31,7 @@ obj-$(CONFIG_PCI_ECAM) += ecam.o
> obj-$(CONFIG_PCI_P2PDMA) += p2pdma.o
> obj-$(CONFIG_XEN_PCIDEV_FRONTEND) += xen-pcifront.o
> obj-$(CONFIG_VGA_ARB) += vgaarb.o
> +obj-$(CONFIG_PCI_DOE) += pci-doe.o
Is there value in the "pci-" prefix? There are a few other files with
the prefix, but I can't remember why. Most things are of the form
"doe.c".
> # Endpoint library must be initialized before its users
> obj-$(CONFIG_PCI_ENDPOINT) += endpoint/
> diff --git a/drivers/pci/pci-doe.c b/drivers/pci/pci-doe.c
> new file mode 100644
> index 000000000000..ccf936421d2a
> --- /dev/null
> +++ b/drivers/pci/pci-doe.c
> @@ -0,0 +1,607 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Data Object Exchange
> + * https://members.pcisig.com/wg/PCI-SIG/document/16609
I think "PCIe r6.0, sec 6.30" is more generally useful.
> + * Copyright (C) 2021 Huawei
> + * Jonathan Cameron <Jonathan.Cameron@...wei.com>
> + *
> + * Copyright (C) 2022 Intel Corporation
> + * Ira Weiny <ira.weiny@...el.com>
> + */
> +
> +#include <linux/bitfield.h>
> +#include <linux/delay.h>
> +#include <linux/jiffies.h>
> +#include <linux/mutex.h>
> +#include <linux/pci.h>
> +#include <linux/pci-doe.h>
> +#include <linux/workqueue.h>
> +
> +#define PCI_DOE_PROTOCOL_DISCOVERY 0
> +
> +#define PCI_DOE_BUSY_MAX_RETRIES 16
> +#define PCI_DOE_POLL_INTERVAL (HZ / 128)
> +
> +/* Timeout of 1 second from 6.30.2 Operation, PCI Spec v6.0 */
Pedantic: the PCI specs use "r6.0", not "v6.0". Reverse for ACPI. Of
course. Even worse, PCI uses "Revision" for the major, "Version" for
the minor.
> +#define PCI_DOE_TIMEOUT HZ
> +
> +static irqreturn_t pci_doe_irq_handler(int irq, void *data)
> +{
> + struct pci_doe_mb *doe_mb = data;
> + struct pci_dev *pdev = doe_mb->pdev;
> + int offset = doe_mb->cap_offset;
> + u32 val;
> +
> + pci_read_config_dword(pdev, offset + PCI_DOE_STATUS, &val);
> +
> + /* Leave the error case to be handled outside IRQ */
s/irq/IRQ/ for similar comment and log message uses below.
> + if (FIELD_GET(PCI_DOE_STATUS_ERROR, val)) {
> + mod_delayed_work(system_wq, &doe_mb->statemachine, 0);
> + return IRQ_HANDLED;
> + }
> +
> + if (FIELD_GET(PCI_DOE_STATUS_INT_STATUS, val)) {
> + pci_write_config_dword(pdev, offset + PCI_DOE_STATUS,
> + PCI_DOE_STATUS_INT_STATUS);
> + mod_delayed_work(system_wq, &doe_mb->statemachine, 0);
> + return IRQ_HANDLED;
> + }
> +
> + return IRQ_NONE;
> +}
> +
> +/*
> + * Only called when safe to directly access the DOE from
> + * doe_statemachine_work(). Outside access is not protected. Users who
> + * perform such access are left with the pieces.
> + */
> +static void pci_doe_abort_start(struct pci_doe_mb *doe_mb)
> +{
> + struct pci_dev *pdev = doe_mb->pdev;
> + int offset = doe_mb->cap_offset;
> + u32 val;
> +
> + val = PCI_DOE_CTRL_ABORT;
> + if (doe_mb->irq >= 0)
> + val |= PCI_DOE_CTRL_INT_EN;
> + pci_write_config_dword(pdev, offset + PCI_DOE_CTRL, val);
> +
> + doe_mb->timeout_jiffies = jiffies + HZ;
> + schedule_delayed_work(&doe_mb->statemachine, HZ);
> +}
> +
> +static int pci_doe_send_req(struct pci_doe_mb *doe_mb, struct pci_doe_task *task)
Wrap to fit in 80 columns, like the rest of drivers/pci/*
> +{
> + struct pci_dev *pdev = doe_mb->pdev;
> + int offset = doe_mb->cap_offset;
> + u32 val;
> + int i;
> +
> + /*
> + * Check the DOE busy bit is not set. If it is set, this could indicate
> + * someone other than Linux (e.g. firmware) is using the mailbox. Note
> + * it is expected that firmware and OS will negotiate access rights via
> + * an, as yet to be defined method.
> + */
> + pci_read_config_dword(pdev, offset + PCI_DOE_STATUS, &val);
> + if (FIELD_GET(PCI_DOE_STATUS_BUSY, val))
> + return -EBUSY;
> +
> + if (FIELD_GET(PCI_DOE_STATUS_ERROR, val))
> + return -EIO;
> +
> + /* Write DOE Header */
> + val = FIELD_PREP(PCI_DOE_DATA_OBJECT_HEADER_1_VID, task->prot.vid) |
> + FIELD_PREP(PCI_DOE_DATA_OBJECT_HEADER_1_TYPE, task->prot.type);
> + pci_write_config_dword(pdev, offset + PCI_DOE_WRITE, val);
> + /* Length is 2 DW of header + length of payload in DW */
> + pci_write_config_dword(pdev, offset + PCI_DOE_WRITE,
> + FIELD_PREP(PCI_DOE_DATA_OBJECT_HEADER_2_LENGTH,
> + 2 + task->request_pl_sz /
> + sizeof(u32)));
> + for (i = 0; i < task->request_pl_sz / sizeof(u32); i++)
> + pci_write_config_dword(pdev, offset + PCI_DOE_WRITE,
> + task->request_pl[i]);
> +
> + val = PCI_DOE_CTRL_GO;
> + if (doe_mb->irq >= 0)
> + val |= PCI_DOE_CTRL_INT_EN;
> +
> + pci_write_config_dword(pdev, offset + PCI_DOE_CTRL, val);
> + /* Request is sent - now wait for poll or IRQ */
> + return 0;
> +}
> +
> +static int pci_doe_recv_resp(struct pci_doe_mb *doe_mb, struct pci_doe_task *task)
> +{
> + struct pci_dev *pdev = doe_mb->pdev;
> + int offset = doe_mb->cap_offset;
> + size_t length;
> + u32 val;
> + int i;
> +
> + /* Read the first dword to get the protocol */
> + pci_read_config_dword(pdev, offset + PCI_DOE_READ, &val);
> + if ((FIELD_GET(PCI_DOE_DATA_OBJECT_HEADER_1_VID, val) != task->prot.vid) ||
> + (FIELD_GET(PCI_DOE_DATA_OBJECT_HEADER_1_TYPE, val) != task->prot.type)) {
> + pci_err(pdev,
> + "Expected [VID, Protocol] = [%#x, %#x], got [%#x, %#x]\n",
Needs a "DOE" or similar hint for where to look when you see this
error.
"%04x" is the typical way we print a PCI vendor ID. I guess a leading
"0x" isn't a disaster, but I do think it should be 4 hex digits so it
doesn't look like a length or something.
It looks like you anticipate multiple DOE capabilities. Maybe
messages should include the capability offset to be specific?
I see you print with %u in pci_doe_create_mb(). I'm pretty sure
"lspci -vv" prints them in hex, and it's probably useful to match.
> + task->prot.vid, task->prot.type,
> + FIELD_GET(PCI_DOE_DATA_OBJECT_HEADER_1_VID, val),
> + FIELD_GET(PCI_DOE_DATA_OBJECT_HEADER_1_TYPE, val));
> + return -EIO;
> + }
> +
> + pci_write_config_dword(pdev, offset + PCI_DOE_READ, 0);
> + /* Read the second dword to get the length */
> + pci_read_config_dword(pdev, offset + PCI_DOE_READ, &val);
> + pci_write_config_dword(pdev, offset + PCI_DOE_READ, 0);
> +
> + length = FIELD_GET(PCI_DOE_DATA_OBJECT_HEADER_2_LENGTH, val);
> + if (length > SZ_1M || length < 2)
> + return -EIO;
> +
> + /* First 2 dwords have already been read */
> + length -= 2;
> + /* Read the rest of the response payload */
> + for (i = 0; i < min(length, task->response_pl_sz / sizeof(u32)); i++) {
> + pci_read_config_dword(pdev, offset + PCI_DOE_READ,
> + &task->response_pl[i]);
> + pci_write_config_dword(pdev, offset + PCI_DOE_READ, 0);
> + }
> +
> + /* Flush excess length */
> + for (; i < length; i++) {
> + pci_read_config_dword(pdev, offset + PCI_DOE_READ, &val);
> + pci_write_config_dword(pdev, offset + PCI_DOE_READ, 0);
> + }
> + /* Final error check to pick up on any since Data Object Ready */
> + pci_read_config_dword(pdev, offset + PCI_DOE_STATUS, &val);
> + if (FIELD_GET(PCI_DOE_STATUS_ERROR, val))
> + return -EIO;
> +
> + return min(length, task->response_pl_sz / sizeof(u32)) * sizeof(u32);
> +}
> +
> +static void signal_task_complete(struct pci_doe_task *task, int rv)
> +{
> + task->rv = rv;
> + task->complete(task);
> +}
> +
> +static void retire_cur_task(struct pci_doe_mb *doe_mb)
> +{
> + mutex_lock(&doe_mb->task_lock);
> + doe_mb->cur_task = NULL;
> + mutex_unlock(&doe_mb->task_lock);
> + wake_up_interruptible(&doe_mb->wq);
> +}
> +
> +static void doe_statemachine_work(struct work_struct *work)
> +{
> + struct delayed_work *w = to_delayed_work(work);
> + struct pci_doe_mb *doe_mb = container_of(w, struct pci_doe_mb,
> + statemachine);
> + struct pci_dev *pdev = doe_mb->pdev;
> + int offset = doe_mb->cap_offset;
> + struct pci_doe_task *task;
> + u32 val;
> + int rc;
> +
> + mutex_lock(&doe_mb->task_lock);
> + task = doe_mb->cur_task;
> + mutex_unlock(&doe_mb->task_lock);
> +
> + if (test_and_clear_bit(PCI_DOE_FLAG_ABORT, &doe_mb->flags)) {
> + /*
> + * Currently only used during init - care needed if
> + * pci_doe_abort() is generally exposed as it would impact
> + * queries in flight.
> + */
> + if (task)
> + pr_err("Aborting with active task!\n");
This should be a dev_err() and probably include "DOE" or some kind of
hint about what this applies to.
> + doe_mb->state = DOE_WAIT_ABORT;
> + pci_doe_abort_start(doe_mb);
> + return;
> + }
> +
> + switch (doe_mb->state) {
> + case DOE_IDLE:
> + if (task == NULL)
> + return;
> +
> + rc = pci_doe_send_req(doe_mb, task);
Add blank line before block comment.
> + /*
> + * The specification does not provide any guidance on how long
> + * some other entity could keep the DOE busy, so try for 1
> + * second then fail. Busy handling is best effort only, because
> + * there is no way of avoiding racing against another user of
> + * the DOE.
> + */
> + if (rc == -EBUSY) {
> + doe_mb->busy_retries++;
> + if (doe_mb->busy_retries == PCI_DOE_BUSY_MAX_RETRIES) {
> + /* Long enough, fail this request */
> + pci_warn(pdev,
> + "DOE busy for too long (> 1 sec)\n");
> + doe_mb->busy_retries = 0;
> + goto err_busy;
> + }
> + schedule_delayed_work(w, HZ / PCI_DOE_BUSY_MAX_RETRIES);
> + return;
> + }
> + if (rc)
> + goto err_abort;
> + doe_mb->busy_retries = 0;
> +
> + doe_mb->state = DOE_WAIT_RESP;
> + doe_mb->timeout_jiffies = jiffies + HZ;
> + /* Now poll or wait for IRQ with timeout */
> + if (doe_mb->irq >= 0)
> + schedule_delayed_work(w, PCI_DOE_TIMEOUT);
> + else
> + schedule_delayed_work(w, PCI_DOE_POLL_INTERVAL);
> + return;
> +
> + case DOE_WAIT_RESP:
> + /* Not possible to get here with NULL task */
> + pci_read_config_dword(pdev, offset + PCI_DOE_STATUS, &val);
> + if (FIELD_GET(PCI_DOE_STATUS_ERROR, val)) {
> + rc = -EIO;
> + goto err_abort;
> + }
> +
> + if (!FIELD_GET(PCI_DOE_STATUS_DATA_OBJECT_READY, val)) {
> + /* If not yet at timeout reschedule otherwise abort */
> + if (time_after(jiffies, doe_mb->timeout_jiffies)) {
> + rc = -ETIMEDOUT;
> + goto err_abort;
> + }
> + schedule_delayed_work(w, PCI_DOE_POLL_INTERVAL);
> + return;
> + }
> +
> + rc = pci_doe_recv_resp(doe_mb, task);
> + if (rc < 0)
> + goto err_abort;
> +
> + doe_mb->state = DOE_IDLE;
> +
> + retire_cur_task(doe_mb);
> + /* Set the return value to the length of received payload */
> + signal_task_complete(task, rc);
> +
> + return;
> +
> + case DOE_WAIT_ABORT:
> + case DOE_WAIT_ABORT_ON_ERR:
> + pci_read_config_dword(pdev, offset + PCI_DOE_STATUS, &val);
> +
> + if (!FIELD_GET(PCI_DOE_STATUS_ERROR, val) &&
> + !FIELD_GET(PCI_DOE_STATUS_BUSY, val)) {
> + /* Back to normal state - carry on */
> + retire_cur_task(doe_mb);
> +
> + /*
> + * For deliberately triggered abort, someone is
> + * waiting.
> + */
> + if (doe_mb->state == DOE_WAIT_ABORT) {
> + if (task)
> + signal_task_complete(task, -EFAULT);
> + complete(&doe_mb->abort_c);
> + }
> +
> + doe_mb->state = DOE_IDLE;
> + return;
> + }
> + if (time_after(jiffies, doe_mb->timeout_jiffies)) {
> + /* Task has timed out and is dead - abort */
> + pci_err(pdev, "DOE ABORT timed out\n");
> + set_bit(PCI_DOE_FLAG_DEAD, &doe_mb->flags);
> + retire_cur_task(doe_mb);
> +
> + if (doe_mb->state == DOE_WAIT_ABORT) {
> + if (task)
> + signal_task_complete(task, -EFAULT);
> + complete(&doe_mb->abort_c);
> + }
> + }
> + return;
> + }
> +
> +err_abort:
> + doe_mb->state = DOE_WAIT_ABORT_ON_ERR;
> + pci_doe_abort_start(doe_mb);
> +err_busy:
> + signal_task_complete(task, rc);
> + if (doe_mb->state == DOE_IDLE)
> + retire_cur_task(doe_mb);
> +}
> +
> +static void pci_doe_task_complete(struct pci_doe_task *task)
> +{
> + complete(task->private);
> +}
> +
> +static int pci_doe_discovery(struct pci_doe_mb *doe_mb, u8 *index, u16 *vid,
> + u8 *protocol)
> +{
> + u32 request_pl = FIELD_PREP(PCI_DOE_DATA_OBJECT_DISC_REQ_3_INDEX,
> + *index);
> + u32 response_pl;
> + DECLARE_COMPLETION_ONSTACK(c);
> + struct pci_doe_task task = {
> + .prot.vid = PCI_VENDOR_ID_PCI_SIG,
> + .prot.type = PCI_DOE_PROTOCOL_DISCOVERY,
> + .request_pl = &request_pl,
> + .request_pl_sz = sizeof(request_pl),
> + .response_pl = &response_pl,
> + .response_pl_sz = sizeof(response_pl),
> + .complete = pci_doe_task_complete,
> + .private = &c,
> + };
> + int ret;
> +
> + ret = pci_doe_submit_task(doe_mb, &task);
> + if (ret < 0)
> + return ret;
> +
> + wait_for_completion(&c);
> +
> + if (task.rv != sizeof(response_pl))
> + return -EIO;
> +
> + *vid = FIELD_GET(PCI_DOE_DATA_OBJECT_DISC_RSP_3_VID, response_pl);
> + *protocol = FIELD_GET(PCI_DOE_DATA_OBJECT_DISC_RSP_3_PROTOCOL,
> + response_pl);
> + *index = FIELD_GET(PCI_DOE_DATA_OBJECT_DISC_RSP_3_NEXT_INDEX,
> + response_pl);
> +
> + return 0;
> +}
> +
> +static int pci_doe_cache_protocols(struct pci_doe_mb *doe_mb)
> +{
> + u8 index = 0;
> + int num_prots;
> + int rc;
> +
> + /* Discovery protocol must always be supported and must report itself */
> + num_prots = 1;
> +
> + doe_mb->prots = kcalloc(num_prots, sizeof(*doe_mb->prots), GFP_KERNEL);
> + if (!doe_mb->prots)
> + return -ENOMEM;
> +
> + /*
> + * NOTE: doe_mb_prots is freed by pci_doe_free_mb automatically on
"pci_doe_free_mb()" to match other function name references.
> + * error if pci_doe_cache_protocols() fails past this point.
> + */
> + do {
> + struct pci_doe_protocol *prot;
> +
> + prot = &doe_mb->prots[num_prots - 1];
> + rc = pci_doe_discovery(doe_mb, &index, &prot->vid, &prot->type);
> + if (rc)
> + return rc;
> +
> + if (index) {
> + struct pci_doe_protocol *prot_new;
> +
> + num_prots++;
> + prot_new = krealloc(doe_mb->prots,
> + sizeof(*doe_mb->prots) * num_prots,
> + GFP_KERNEL);
> + if (!prot_new)
> + return -ENOMEM;
> +
> + doe_mb->prots = prot_new;
> + }
> + } while (index);
> +
> + doe_mb->num_prots = num_prots;
> + return 0;
> +}
> +
> +static int pci_doe_abort(struct pci_doe_mb *doe_mb)
> +{
> + reinit_completion(&doe_mb->abort_c);
> + set_bit(PCI_DOE_FLAG_ABORT, &doe_mb->flags);
> + schedule_delayed_work(&doe_mb->statemachine, 0);
> + wait_for_completion(&doe_mb->abort_c);
> +
> + if (test_bit(PCI_DOE_FLAG_DEAD, &doe_mb->flags))
> + return -EIO;
> +
> + return 0;
> +}
> +
> +static int pci_doe_request_irq(struct pci_doe_mb *doe_mb)
> +{
> + struct pci_dev *pdev = doe_mb->pdev;
> + int offset = doe_mb->cap_offset;
> + int doe_irq, rc;
> + u32 val;
> +
> + pci_read_config_dword(pdev, offset + PCI_DOE_CAP, &val);
> +
> + if (!FIELD_GET(PCI_DOE_CAP_INT, val))
> + return -EOPNOTSUPP;
> +
> + doe_irq = FIELD_GET(PCI_DOE_CAP_IRQ, val);
> + rc = pci_request_irq(pdev, doe_irq, pci_doe_irq_handler,
> + NULL, doe_mb,
> + "DOE[%d:%s]", doe_irq, pci_name(pdev));
> + if (rc)
> + return rc;
> +
> + doe_mb->irq = doe_irq;
> + pci_write_config_dword(pdev, offset + PCI_DOE_CTRL,
> + PCI_DOE_CTRL_INT_EN);
> + return 0;
> +}
> +
> +static void pci_doe_free_mb(struct pci_doe_mb *doe_mb)
> +{
> + if (doe_mb->irq >= 0)
> + pci_free_irq(doe_mb->pdev, doe_mb->irq, doe_mb);
> + kfree(doe_mb->prots);
> + kfree(doe_mb);
> +}
> +
> +/**
> + * pci_doe_create_mb() - Create a DOE mailbox object
> + *
> + * @pdev: PCI device to create the DOE mailbox for
> + * @cap_offset: Offset of the DOE mailbox
> + * @use_irq: Should the state machine use an irq
> + *
> + * Create a single mailbox object to manage the mailbox protocol at the
> + * cap_offset specified.
> + *
> + * Caller should allocate PCI irq vectors before setting use_irq.
> + *
> + * RETURNS: created mailbox object on success
> + * ERR_PTR(-errno) on failure
> + */
> +struct pci_doe_mb *pci_doe_create_mb(struct pci_dev *pdev, u16 cap_offset,
> + bool use_irq)
> +{
> + struct pci_doe_mb *doe_mb;
> + int rc;
> +
> + doe_mb = kzalloc(sizeof(*doe_mb), GFP_KERNEL);
> + if (!doe_mb)
> + return ERR_PTR(-ENOMEM);
> +
> + doe_mb->pdev = pdev;
> + init_completion(&doe_mb->abort_c);
> + doe_mb->irq = -1;
> + doe_mb->cap_offset = cap_offset;
> +
> + init_waitqueue_head(&doe_mb->wq);
> + mutex_init(&doe_mb->task_lock);
> + INIT_DELAYED_WORK(&doe_mb->statemachine, doe_statemachine_work);
> + doe_mb->state = DOE_IDLE;
> +
> + if (use_irq) {
> + rc = pci_doe_request_irq(doe_mb);
> + if (rc)
> + pci_err(pdev, "DOE request irq failed for mailbox @ %u : %d\n",
> + cap_offset, rc);
> + }
> +
> + /* Reset the mailbox by issuing an abort */
> + rc = pci_doe_abort(doe_mb);
> + if (rc) {
> + pci_err(pdev, "DOE failed to reset the mailbox @ %u : %d\n",
> + cap_offset, rc);
> + pci_doe_free_mb(doe_mb);
> + return ERR_PTR(rc);
> + }
> +
> + rc = pci_doe_cache_protocols(doe_mb);
> + if (rc) {
> + pci_err(pdev, "DOE failed to cache protocols for mailbox @ %u : %d\n",
> + cap_offset, rc);
> + pci_doe_free_mb(doe_mb);
> + return ERR_PTR(rc);
> + }
> +
> + return doe_mb;
> +}
> +EXPORT_SYMBOL_GPL(pci_doe_create_mb);
> +
> +/**
> + * pci_doe_supports_prot() - Return if the DOE instance supports the given
> + * protocol
> + * @doe_mb: DOE mailbox capability to query
> + * @vid: Protocol Vendor ID
> + * @type: protocol type
Protocol
> + *
> + * RETURNS: True if the DOE device supports the protocol specified
I think you typically use "DOE mailbox", not "DOE device".
> + */
> +bool pci_doe_supports_prot(struct pci_doe_mb *doe_mb, u16 vid, u8 type)
> +{
> + int i;
> +
> + /* The discovery protocol must always be supported */
> + if (vid == PCI_VENDOR_ID_PCI_SIG && type == PCI_DOE_PROTOCOL_DISCOVERY)
> + return true;
> +
> + for (i = 0; i < doe_mb->num_prots; i++)
> + if ((doe_mb->prots[i].vid == vid) &&
> + (doe_mb->prots[i].type == type))
> + return true;
> +
> + return false;
> +}
> +EXPORT_SYMBOL_GPL(pci_doe_supports_prot);
> +
> +/**
> + * pci_doe_submit_task() - Submit a task to be processed by the state machine
> + *
> + * @doe_mb: DOE mailbox capability to submit to
> + * @task: task to be queued
> + *
> + * Submit a DOE task (request/response) to the DOE mailbox to be processed.
> + * Returns upon queueing the task object. If the queue is full this function
> + * will sleep until there is room in the queue.
> + *
> + * task->complete will be called when the state machine is done processing this
> + * task.
> + *
> + * Excess data will be discarded.
> + *
> + * RETURNS: 0 when task has been successful queued, -ERRNO on error
> + */
> +int pci_doe_submit_task(struct pci_doe_mb *doe_mb, struct pci_doe_task *task)
> +{
> + if (!pci_doe_supports_prot(doe_mb, task->prot.vid, task->prot.type))
> + return -EINVAL;
> +
> + /* DOE requests must be a whole number of DW */
> + if (task->request_pl_sz % sizeof(u32))
> + return -EINVAL;
> +
> +again:
> + mutex_lock(&doe_mb->task_lock);
> + if (doe_mb->cur_task) {
> + mutex_unlock(&doe_mb->task_lock);
> + wait_event_interruptible(doe_mb->wq, doe_mb->cur_task == NULL);
> + goto again;
> + }
> +
> + if (test_bit(PCI_DOE_FLAG_DEAD, &doe_mb->flags)) {
> + mutex_unlock(&doe_mb->task_lock);
> + return -EIO;
> + }
> + doe_mb->cur_task = task;
> + mutex_unlock(&doe_mb->task_lock);
> + schedule_delayed_work(&doe_mb->statemachine, 0);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(pci_doe_submit_task);
> +
> +/**
> + * pci_doe_destroy_mb() - Destroy a DOE mailbox object created with
> + * pci_doe_create_mb()
> + *
> + * @doe_mb: DOE mailbox capability structure to destroy
> + *
> + * The mailbox becomes invalid and should not be used after this call.
> + */
> +void pci_doe_destroy_mb(struct pci_doe_mb *doe_mb)
> +{
> + /* abort any work in progress */
> + pci_doe_abort(doe_mb);
> +
> + /* halt the state machine */
> + cancel_delayed_work_sync(&doe_mb->statemachine);
> +
> + pci_doe_free_mb(doe_mb);
> +}
> +EXPORT_SYMBOL_GPL(pci_doe_destroy_mb);
> diff --git a/include/linux/pci-doe.h b/include/linux/pci-doe.h
> new file mode 100644
> index 000000000000..7e6ebaf9930a
> --- /dev/null
> +++ b/include/linux/pci-doe.h
> @@ -0,0 +1,119 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Data Object Exchange
> + * https://members.pcisig.com/wg/PCI-SIG/document/16609
Ditto.
> + *
> + * Copyright (C) 2021 Huawei
> + * Jonathan Cameron <Jonathan.Cameron@...wei.com>
> + *
> + * Copyright (C) 2022 Intel Corporation
> + * Ira Weiny <ira.weiny@...el.com>
> + */
> +
> +#ifndef LINUX_PCI_DOE_H
> +#define LINUX_PCI_DOE_H
> +
> +#include <linux/completion.h>
> +
> +enum pci_doe_state {
> + DOE_IDLE,
> + DOE_WAIT_RESP,
> + DOE_WAIT_ABORT,
> + DOE_WAIT_ABORT_ON_ERR,
> +};
> +
> +#define PCI_DOE_FLAG_ABORT 0
> +#define PCI_DOE_FLAG_DEAD 1
> +
> +struct pci_doe_protocol {
> + u16 vid;
> + u8 type;
> +};
> +
> +/**
> + * struct pci_doe_task - represents a single query/response
> + *
> + * @prot: DOE Protocol
> + * @request_pl: The request payload
> + * @request_pl_sz: Size of the request payload
> + * @response_pl: The response payload
> + * @response_pl_sz: Size of the response payload
> + * @rv: Return value. Length of received response or error
> + * @complete: Called when task is complete
> + * @private: Private data for the consumer
> + */
> +struct pci_doe_task {
> + struct pci_doe_protocol prot;
> + u32 *request_pl;
> + size_t request_pl_sz;
> + u32 *response_pl;
> + size_t response_pl_sz;
> + int rv;
> + void (*complete)(struct pci_doe_task *task);
> + void *private;
> +};
> +
> +/**
> + * struct pci_doe_mb - State for a single DOE mailbox
> + *
> + * This state is used to manage a single DOE mailbox capability. All fields
> + * should be considered opaque to the consumers and the structure passed into
> + * the helpers below after being created by devm_pci_doe_create()
> + *
> + * @pdev: PCI device this belongs to mailbox belongs to
> + * @abort_c: Completion used for initial abort handling
> + * @irq: Interrupt used for signaling DOE ready or abort
> + * @prots: Array of protocols supported on this DOE
> + * @num_prots: Size of prots array
> + * @cap_offset: Capability offset
> + * @wq: Wait queue to wait on if a query is in progress
> + * @cur_task: Current task the state machine is working on
> + * @task_lock: Protect cur_task
> + * @statemachine: Work item for the DOE state machine
> + * @state: Current state of this DOE
> + * @timeout_jiffies: 1 second after GO set
> + * @busy_retries: Count of retry attempts
> + * @flags: Bit array of PCI_DOE_FLAG_* flags
> + *
> + * Note: prots can't be allocated with struct size because the number of
> + * protocols is not known until after this structure is in use. However, the
> + * single discovery protocol is always required to query for the number of
> + * protocols.
> + */
> +struct pci_doe_mb {
> + struct pci_dev *pdev;
> + struct completion abort_c;
> + int irq;
> + struct pci_doe_protocol *prots;
> + int num_prots;
> + u16 cap_offset;
> +
> + wait_queue_head_t wq;
> + struct pci_doe_task *cur_task;
> + struct mutex task_lock;
> + struct delayed_work statemachine;
> + enum pci_doe_state state;
> + unsigned long timeout_jiffies;
> + unsigned int busy_retries;
> + unsigned long flags;
> +};
> +
> +/**
> + * pci_doe_for_each_off - Iterate each DOE capability
> + * @pdev: struct pci_dev to iterate
> + * @off: u16 of config space offset of each mailbox capability found
> + */
> +#define pci_doe_for_each_off(pdev, off) \
> + for (off = pci_find_next_ext_capability(pdev, off, \
> + PCI_EXT_CAP_ID_DOE); \
> + off > 0; \
> + off = pci_find_next_ext_capability(pdev, off, \
> + PCI_EXT_CAP_ID_DOE))
> +
> +struct pci_doe_mb *pci_doe_create_mb(struct pci_dev *pdev, u16 cap_offset,
> + bool use_irq);
> +void pci_doe_destroy_mb(struct pci_doe_mb *doe_mb);
> +bool pci_doe_supports_prot(struct pci_doe_mb *doe_mb, u16 vid, u8 type);
> +int pci_doe_submit_task(struct pci_doe_mb *doe_mb, struct pci_doe_task *task);
> +
> +#endif
> diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h
> index bee1a9ed6e66..4e96b45ee36d 100644
> --- a/include/uapi/linux/pci_regs.h
> +++ b/include/uapi/linux/pci_regs.h
> @@ -736,7 +736,8 @@
> #define PCI_EXT_CAP_ID_DVSEC 0x23 /* Designated Vendor-Specific */
> #define PCI_EXT_CAP_ID_DLF 0x25 /* Data Link Feature */
> #define PCI_EXT_CAP_ID_PL_16GT 0x26 /* Physical Layer 16.0 GT/s */
> -#define PCI_EXT_CAP_ID_MAX PCI_EXT_CAP_ID_PL_16GT
> +#define PCI_EXT_CAP_ID_DOE 0x2E /* Data Object Exchange */
> +#define PCI_EXT_CAP_ID_MAX PCI_EXT_CAP_ID_DOE
>
> #define PCI_EXT_CAP_DSN_SIZEOF 12
> #define PCI_EXT_CAP_MCAST_ENDPOINT_SIZEOF 40
> @@ -1102,4 +1103,30 @@
> #define PCI_PL_16GT_LE_CTRL_USP_TX_PRESET_MASK 0x000000F0
> #define PCI_PL_16GT_LE_CTRL_USP_TX_PRESET_SHIFT 4
>
> +/* Data Object Exchange */
> +#define PCI_DOE_CAP 0x04 /* DOE Capabilities Register */
> +#define PCI_DOE_CAP_INT 0x00000001 /* Interrupt Support */
> +#define PCI_DOE_CAP_IRQ 0x00000ffe /* Interrupt Message Number */
> +#define PCI_DOE_CTRL 0x08 /* DOE Control Register */
> +#define PCI_DOE_CTRL_ABORT 0x00000001 /* DOE Abort */
> +#define PCI_DOE_CTRL_INT_EN 0x00000002 /* DOE Interrupt Enable */
> +#define PCI_DOE_CTRL_GO 0x80000000 /* DOE Go */
> +#define PCI_DOE_STATUS 0x0c /* DOE Status Register */
> +#define PCI_DOE_STATUS_BUSY 0x00000001 /* DOE Busy */
> +#define PCI_DOE_STATUS_INT_STATUS 0x00000002 /* DOE Interrupt Status */
> +#define PCI_DOE_STATUS_ERROR 0x00000004 /* DOE Error */
> +#define PCI_DOE_STATUS_DATA_OBJECT_READY 0x80000000 /* Data Object Ready */
> +#define PCI_DOE_WRITE 0x10 /* DOE Write Data Mailbox Register */
> +#define PCI_DOE_READ 0x14 /* DOE Read Data Mailbox Register */
> +
> +/* DOE Data Object - note not actually registers */
> +#define PCI_DOE_DATA_OBJECT_HEADER_1_VID 0x0000ffff
> +#define PCI_DOE_DATA_OBJECT_HEADER_1_TYPE 0x00ff0000
> +#define PCI_DOE_DATA_OBJECT_HEADER_2_LENGTH 0x0003ffff
> +
> +#define PCI_DOE_DATA_OBJECT_DISC_REQ_3_INDEX 0x000000ff
> +#define PCI_DOE_DATA_OBJECT_DISC_RSP_3_VID 0x0000ffff
> +#define PCI_DOE_DATA_OBJECT_DISC_RSP_3_PROTOCOL 0x00ff0000
> +#define PCI_DOE_DATA_OBJECT_DISC_RSP_3_NEXT_INDEX 0xff000000
> +
> #endif /* LINUX_PCI_REGS_H */
> --
> 2.35.1
>
Powered by blists - more mailing lists