| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <7e066b7f-943a-6a5e-7383-a05794d207dc@linaro.org>
Date: Sat, 30 Apr 2022 22:33:59 +0300
From: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To: Konrad Dybcio <konrad.dybcio@...ainline.org>,
~postmarketos/upstreaming@...ts.sr.ht
Cc: martin.botka@...ainline.org,
angelogioacchino.delregno@...ainline.org,
marijn.suijten@...ainline.org, jamipkettunen@...ainline.org,
Rob Clark <robdclark@...il.com>, Sean Paul <sean@...rly.run>,
Abhinav Kumar <quic_abhinavk@...cinc.com>,
David Airlie <airlied@...ux.ie>,
Daniel Vetter <daniel@...ll.ch>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
linux-arm-msm@...r.kernel.org, dri-devel@...ts.freedesktop.org,
freedreno@...ts.freedesktop.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH 1/3] dt-bindings: display: msm: Add binding for MSM8996
DPU
On 30/04/2022 19:15, Konrad Dybcio wrote:
> Add yaml binding for MSM8996 DPU.
>
> Signed-off-by: Konrad Dybcio <konrad.dybcio@...ainline.org>
> ---
> .../bindings/display/msm/dpu-msm8996.yaml | 221 ++++++++++++++++++
> 1 file changed, 221 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/msm/dpu-msm8996.yaml
>
> diff --git a/Documentation/devicetree/bindings/display/msm/dpu-msm8996.yaml b/Documentation/devicetree/bindings/display/msm/dpu-msm8996.yaml
> new file mode 100644
> index 000000000000..10b02423224d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/msm/dpu-msm8996.yaml
> @@ -0,0 +1,221 @@
> +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/msm/dpu-msm8996.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Display DPU dt properties for MSM8996 target
> +
> +maintainers:
> + - Konrad Dybcio <konrad.dybcio@...ainline.org>
> +
> +description: |
> + Device tree bindings for MSM Mobile Display Subsystem (MDSS) that
> + encapsulates sub-blocks like DPU display controller, DSI interfaces, etc.
> + Device tree bindings of MDSS and DPU are mentioned for MSM8996 target.
> +
> +properties:
> + compatible:
> + items:
> + - const: qcom,msm8996-mdss
With the unified MDSS driver there is no need to describe a separate
mdss bindings. Let's skip this part for now.
> +
> + reg:
> + maxItems: 1
> +
> + reg-names:
> + const: mdss
> +
> + power-domains:
> + maxItems: 1
> +
> + clocks:
> + items:
> + - description: Display AHB clock
> + - description: Display core clock
> +
> + clock-names:
> + items:
> + - const: iface
> + - const: core
> +
> + interrupts:
> + maxItems: 1
> +
> + interrupt-controller: true
> +
> + "#address-cells": true
> +
> + "#size-cells": true
> +
> + "#interrupt-cells":
> + const: 1
> +
> + iommus:
> + items:
> + - description: Phandle to mdp_smmu node with SID mask for Hard-Fail port0
> +
> + ranges: true
> +
> +patternProperties:
> + "^display-controller@[0-9a-f]+$":
> + type: object
> + description: Node containing the properties of DPU.
> +
> + properties:
> + compatible:
> + items:
> + - const: qcom,msm8996-dpu
Okay. So, this is the most interesting part. Unlike MSM8998, which is
supported in the mdp5 driver, but was not used in the upstream DTS
files, for the MSM8996 the MDP5 part is described, used and widely
tested. And, unfortunately, the bindings use solely the generic
"qcom,mdp5" compat.
I would suggest the following plan:
- Define a binding using both "qcom,msm8996-dpu" and "qcom,mdp5"
strings. Make sure that it is fully backwards-compatible with older dts.
- Update msm8996.dtsi to follow new binding.
- Let's have a Kconfig flip switch selecting which driver to be used for
8996/8998.
> +
> + reg:
> + items:
> + - description: Address offset and size for mdp register set
> + - description: Address offset and size for vbif register set
> + - description: Address offset and size for non-realtime vbif register set
> +
> + reg-names:
> + items:
> + - const: mdp
> + - const: vbif
> + - const: vbif_nrt
> +
> + clocks:
> + items:
> + - description: Display ahb clock
> + - description: Display axi clock
> + - description: Display core clock
> + - description: Display iommu clock
> + - description: Display vsync clock
> +
> + clock-names:
> + items:
> + - const: iface
> + - const: bus
> + - const: core
> + - const: iommu
> + - const: vsync
> +
> + interrupts:
> + maxItems: 1
> +
> + power-domains:
> + maxItems: 1
> +
> + operating-points-v2: true
> + ports:
> + $ref: /schemas/graph.yaml#/properties/ports
> + description: |
> + Contains the list of output ports from DPU device. These ports
> + connect to interfaces that are external to the DPU hardware,
> + such as DSI, DP etc. Each output port contains an endpoint that
> + describes how it is connected to an external interface.
> +
> + properties:
> + port@0:
> + $ref: /schemas/graph.yaml#/properties/port
> + description: DPU_INTF3 (HDMI)
> +
> + port@1:
> + $ref: /schemas/graph.yaml#/properties/port
> + description: DPU_INTF1 (DSI0)
> +
> + required:
> + - port@0
> + - port@1
> +
> + required:
> + - compatible
> + - reg
> + - reg-names
> + - clocks
> + - interrupts
> + - power-domains
> + - operating-points-v2
> + - ports
> +
> +required:
> + - compatible
> + - reg
> + - reg-names
> + - power-domains
> + - clocks
> + - interrupts
> + - interrupt-controller
> + - iommus
> + - ranges
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/qcom,mmcc-msm8996.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/power/qcom-rpmpd.h>
> +
> + mdss: display-subsystem@...000 {
> + compatible = "qcom,msm8996-mdss";
> + reg = <0x00900000 0x1000>;
> + reg-names = "mdss";
> +
> + power-domains = <&mmcc MDSS_GDSC>;
> +
> + clocks = <&mmcc MDSS_AHB_CLK>, <&mmcc MDSS_MDP_CLK>;
> + clock-names = "iface", "core";
> +
> + assigned-clocks = <&mmcc MDSS_MDP_CLK>;
> + assigned-clock-rates = <300000000>;
This should not be necessary.
> +
> + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-controller;
> + #interrupt-cells = <1>;
> +
> + iommus = <&mdp_smmu 0>;
> +
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + display-controller@...000 {
> + compatible = "qcom,msm8996-dpu";
> + reg = <0x00901000 0x90000>,
> + <0x009b0000 0x1040>,
> + <0x009b8000 0x1040>;
> + reg-names = "mdp", "vbif", "vbif_nrt";
> +
> + clocks = <&mmcc MDSS_AHB_CLK>,
> + <&mmcc MDSS_AXI_CLK>,
> + <&mmcc MDSS_MDP_CLK>,
> + <&mmcc SMMU_MDP_AXI_CLK>,
> + <&mmcc MDSS_VSYNC_CLK>;
> + clock-names = "iface", "bus", "core", "iommu", "vsync";
> +
> + assigned-clocks = <&mmcc MDSS_MDP_CLK>,
> + <&mmcc MDSS_VSYNC_CLK>;
> + assigned-clock-rates = <412500000>, <19200000>;
MDP_CLK here should not be neccessary after Vinod Polimera's patches.
> +
> + operating-points-v2 = <&mdp_opp_table>;
> + power-domains = <&rpmpd MSM8996_VDDMX>;
> +
> + interrupt-parent = <&mdss>;
> + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + dpu_intf3_out: endpoint {
> + remote-endpoint = <&hdmi_in>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + dpu_intf1_out: endpoint {
> + remote-endpoint = <&dsi0_in>;
> + };
> + };
> + };
> + };
> + };
> +...
--
With best wishes
Dmitry
Powered by blists - more mailing lists