linux-kernel - [PATCH v4 10/13] ARM: dts: lan966x: add reset switch reset node

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20220502224127.2604333-11-michael@walle.cc>
Date:   Tue,  3 May 2022 00:41:24 +0200
From:   Michael Walle <michael@...le.cc>
To:     Kavyasree Kotagiri <kavyasree.kotagiri@...rochip.com>,
        Nicolas Ferre <nicolas.ferre@...rochip.com>
Cc:     Arnd Bergmann <arnd@...db.de>, Olof Johansson <olof@...om.net>,
        soc@...nel.org, linux-arm-kernel@...ts.infradead.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski@...onical.com>,
        Alexandre Belloni <alexandre.belloni@...tlin.com>,
        Claudiu Beznea <claudiu.beznea@...rochip.com>,
        Tudor.Ambarus@...rochip.com,
        Horatiu Vultur <horatiu.vultur@...rochip.com>,
        Michael Walle <michael@...le.cc>
Subject: [PATCH v4 10/13] ARM: dts: lan966x: add reset switch reset node

Add the switch reset node which will later be used by the switch driver.
The switch reset also resets the GPIO controller and the SGPIO
controller, thus it also has to be connectected to these nodes. This way
the reset will only issued once for the first device requesting the
reset.

Signed-off-by: Michael Walle <michael@...le.cc>
---
 arch/arm/boot/dts/lan966x.dtsi | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/arch/arm/boot/dts/lan966x.dtsi b/arch/arm/boot/dts/lan966x.dtsi
index 0442735910da..7020b31322d8 100644
--- a/arch/arm/boot/dts/lan966x.dtsi
+++ b/arch/arm/boot/dts/lan966x.dtsi
@@ -391,6 +391,11 @@ watchdog: watchdog@...90000 {
 			status = "disabled";
 		};
 
+		cpu_ctrl: syscon@...c0000 {
+			compatible = "microchip,lan966x-cpu-syscon", "syscon";
+			reg = <0xe00c0000 0x350>;
+		};
+
 		can0: can@...1c000 {
 			compatible = "bosch,m_can";
 			reg = <0xe081c000 0xfc>, <0x00100000 0x4000>;
@@ -406,10 +411,20 @@ can0: can@...1c000 {
 			status = "disabled";
 		};
 
+		reset: reset-controller@...0400c {
+			compatible = "microchip,lan966x-switch-reset";
+			reg = <0xe200400c 0x4>;
+			reg-names = "gcb";
+			#reset-cells = <1>;
+			cpu-syscon = <&cpu_ctrl>;
+		};
+
 		gpio: pinctrl@...04064 {
 			compatible = "microchip,lan966x-pinctrl";
 			reg = <0xe2004064 0xb4>,
 			    <0xe2010024 0x138>;
+			resets = <&reset 0>;
+			reset-names = "switch";
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-ranges = <&gpio 0 0 78>;
@@ -453,6 +468,8 @@ sgpio: gpio@...04190 {
 			compatible = "microchip,sparx5-sgpio";
 			reg = <0xe2004190 0x118>;
 			clocks = <&sys_clk>;
+			resets = <&reset 0>;
+			reset-names = "switch";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
-- 
2.30.2