[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1652235304-4617-1-git-send-email-haibo.chen@nxp.com>
Date: Wed, 11 May 2022 10:15:04 +0800
From: haibo.chen@....com
To: linus.walleij@...aro.org, brgl@...ev.pl, aisheng.dong@....com
Cc: peng.fan@....com, linux-gpio@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-imx@....com, haibo.chen@....com
Subject: [PATCH v2] gpio: gpio-vf610: do not touch other bits when set the target bit
From: Haibo Chen <haibo.chen@....com>
For gpio controller contain register PDDR, when set one target bit,
current logic will clear all other bits, this is wrong. Use operator
'|=' to fix it.
Fixes: 659d8a62311f ("gpio: vf610: add imx7ulp support")
Reviewed-by: Peng Fan <peng.fan@....com>
Signed-off-by: Haibo Chen <haibo.chen@....com>
---
drivers/gpio/gpio-vf610.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/gpio/gpio-vf610.c b/drivers/gpio/gpio-vf610.c
index 20780c35da1b..23cddb265a0d 100644
--- a/drivers/gpio/gpio-vf610.c
+++ b/drivers/gpio/gpio-vf610.c
@@ -125,9 +125,13 @@ static int vf610_gpio_direction_output(struct gpio_chip *chip, unsigned gpio,
{
struct vf610_gpio_port *port = gpiochip_get_data(chip);
unsigned long mask = BIT(gpio);
+ u32 val;
- if (port->sdata && port->sdata->have_paddr)
- vf610_gpio_writel(mask, port->gpio_base + GPIO_PDDR);
+ if (port->sdata && port->sdata->have_paddr) {
+ val = vf610_gpio_readl(port->gpio_base + GPIO_PDDR);
+ val |= mask;
+ vf610_gpio_writel(val, port->gpio_base + GPIO_PDDR);
+ }
vf610_gpio_set(chip, gpio, value);
--
2.25.1
Powered by blists - more mailing lists