| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <01c2c11f-71fd-b735-b935-109865d62de5@163.com>
Date: Thu, 12 May 2022 12:34:38 +0800
From: qianfan <qianfanguijin@....com>
To: Jernej Škrabec <jernej.skrabec@...il.com>,
linux-sunxi@...ts.linux.dev
Cc: Rob Herring <robh+dt@...nel.org>,
Maxime Ripard <mripard@...nel.org>,
Chen-Yu Tsai <wens@...e.org>,
"Rafael J . Wysocki" <rafael@...nel.org>,
Viresh Kumar <viresh.kumar@...aro.org>,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, linux-pm@...r.kernel.org
Subject: Re: [PATCH v2] drivers: cpufreq: sun8i-r40: Add cpufreq support
在 2022/5/12 4:13, Jernej Škrabec 写道:
> Dne torek, 10. maj 2022 ob 02:36:11 CEST je qianfanguijin@....com napisal(a):
>> From: qianfan Zhao <qianfanguijin@....com>
>>
>> OPP table value is get from allwinner lichee 3.10 kernel.
>> And completed 'cpu-supply' on sun8i based board.
>>
>> Signed-off-by: qianfan Zhao <qianfanguijin@....com>
>> ---
>> .../boot/dts/sun8i-r40-bananapi-m2-ultra.dts | 4 ++
>> arch/arm/boot/dts/sun8i-r40-feta40i.dtsi | 4 ++
>> arch/arm/boot/dts/sun8i-r40.dtsi | 47 +++++++++++++++++++
>> arch/arm/boot/dts/sun8i-t3-cqa3t-bv3.dts | 4 ++
>> .../boot/dts/sun8i-v40-bananapi-m2-berry.dts | 4 ++
>> drivers/cpufreq/cpufreq-dt-platdev.c | 1 +
> This patch needs to be split in two:
> 1. driver change
> 2. DT changes
>
> And please add change log here for next submission.
Maybe there patch is better? one of driver, one of sun8i-r40.dtsi
and the others is the board's changes.
>
>> 6 files changed, 64 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/
> boot/dts/sun8i-r40-bananapi-m2-ultra.dts
>> index a6a1087a0c9b..4f30018ec4a2 100644
>> --- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
>> +++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
>> @@ -113,6 +113,10 @@ &ahci {
>> status = "okay";
>> };
>>
>> +&cpu0 {
>> + cpu-supply = <®_dcdc2>;
>> +};
>> +
>> &de {
>> status = "okay";
>> };
>> diff --git a/arch/arm/boot/dts/sun8i-r40-feta40i.dtsi b/arch/arm/boot/dts/
> sun8i-r40-feta40i.dtsi
>> index 265e0fa57a32..b872b51a346d 100644
>> --- a/arch/arm/boot/dts/sun8i-r40-feta40i.dtsi
>> +++ b/arch/arm/boot/dts/sun8i-r40-feta40i.dtsi
>> @@ -6,6 +6,10 @@
>>
>> #include "sun8i-r40.dtsi"
>>
>> +&cpu0 {
>> + cpu-supply = <®_dcdc2>;
>> +};
>> +
>> &i2c0 {
>> status = "okay";
>>
>> diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-
> r40.dtsi
>> index 291f4784e86c..90de119095fa 100644
>> --- a/arch/arm/boot/dts/sun8i-r40.dtsi
>> +++ b/arch/arm/boot/dts/sun8i-r40.dtsi
>> @@ -54,6 +54,41 @@ / {
>> #size-cells = <1>;
>> interrupt-parent = <&gic>;
>>
>> + cpu0_opp_table: opp_table0 {
>> + compatible = "operating-points-v2";
>> + opp-shared;
>> +
>> + opp-720000000 {
>> + opp-hz = /bits/ 64 <720000000>;
>> + opp-microvolt = <1000000 1000000 1300000>;
>> + clock-latency-ns = <2000000>;
>> + };
>> +
>> + opp-912000000 {
>> + opp-hz = /bits/ 64 <912000000>;
>> + opp-microvolt = <1100000 1100000 1300000>;
>> + clock-latency-ns = <2000000>;
>> + };
>> +
>> + opp-1008000000 {
>> + opp-hz = /bits/ 64 <1008000000>;
>> + opp-microvolt = <1160000 1160000 1300000>;
>> + clock-latency-ns = <2000000>;
>> + };
>> +
>> + opp-1104000000 {
>> + opp-hz = /bits/ 64 <1104000000>;
>> + opp-microvolt = <1240000 1240000 1300000>;
>> + clock-latency-ns = <2000000>;
>> + };
>> +
>> + opp-1200000000 {
>> + opp-hz = /bits/ 64 <1200000000>;
>> + opp-microvolt = <1300000 1300000 1300000>;
>> + clock-latency-ns = <2000000>;
>> + };
>> + };
>> +
>> clocks {
>> #address-cells = <1>;
>> #size-cells = <1>;
>> @@ -84,24 +119,36 @@ cpu0: cpu@0 {
>> compatible = "arm,cortex-a7";
>> device_type = "cpu";
>> reg = <0>;
>> + clocks = <&ccu CLK_CPU>;
>> + clock-names = "cpu";
>> + operating-points-v2 = <&cpu0_opp_table>;
>> };
>>
>> cpu1: cpu@1 {
>> compatible = "arm,cortex-a7";
>> device_type = "cpu";
>> reg = <1>;
>> + clocks = <&ccu CLK_CPU>;
>> + clock-names = "cpu";
>> + operating-points-v2 = <&cpu0_opp_table>;
>> };
>>
>> cpu2: cpu@2 {
>> compatible = "arm,cortex-a7";
>> device_type = "cpu";
>> reg = <2>;
>> + clocks = <&ccu CLK_CPU>;
>> + clock-names = "cpu";
>> + operating-points-v2 = <&cpu0_opp_table>;
>> };
>>
>> cpu3: cpu@3 {
>> compatible = "arm,cortex-a7";
>> device_type = "cpu";
>> reg = <3>;
>> + clocks = <&ccu CLK_CPU>;
>> + clock-names = "cpu";
>> + operating-points-v2 = <&cpu0_opp_table>;
>> };
>> };
>>
>> diff --git a/arch/arm/boot/dts/sun8i-t3-cqa3t-bv3.dts b/arch/arm/boot/dts/
> sun8i-t3-cqa3t-bv3.dts
>> index 6931aaab2382..0eb1990742ff 100644
>> --- a/arch/arm/boot/dts/sun8i-t3-cqa3t-bv3.dts
>> +++ b/arch/arm/boot/dts/sun8i-t3-cqa3t-bv3.dts
>> @@ -88,6 +88,10 @@ &ahci {
>> status = "okay";
>> };
>>
>> +&cpu0 {
>> + cpu-supply = <®_dcdc2>;
>> +};
>> +
>> &de {
>> status = "okay";
>> };
>> diff --git a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts b/arch/arm/
> boot/dts/sun8i-v40-bananapi-m2-berry.dts
>> index 47954551f573..fdf8bd12faaa 100644
>> --- a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
>> +++ b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
>> @@ -107,6 +107,10 @@ &ahci {
>> status = "okay";
>> };
>>
>> +&cpu0 {
>> + cpu-supply = <®_dcdc2>;
>> +};
>> +
>> &de {
>> status = "okay";
>> };
>> diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-
> dt-platdev.c
>> index ca1d103ec449..971a99219d4d 100644
>> --- a/drivers/cpufreq/cpufreq-dt-platdev.c
>> +++ b/drivers/cpufreq/cpufreq-dt-platdev.c
>> @@ -26,6 +26,7 @@ static const struct of_device_id allowlist[] __initconst =
> {
>> { .compatible = "allwinner,sun8i-a23", },
>> { .compatible = "allwinner,sun8i-a83t", },
>> { .compatible = "allwinner,sun8i-h3", },
>> + { .compatible = "allwinner,sun8i-r40", },
> Why on allow list? Comment says operatings-point-v2 should be on block list,
> just like H6.
Actually I'm not make sure the difference, seems both of them can work.
Most of allwinner device_id is added in allowlist, so I did this.
>
> Best regards,
> Jernej
>
>>
>> { .compatible = "apm,xgene-shadowcat", },
>>
>> --
>> 2.25.1
>>
>>
Powered by blists - more mailing lists