linux-kernel - Re: [PATCH v3 04/23] dt-bindings: ata: sata: Extend number of SATA ports

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <271251bf-f941-4db3-5ffd-f54439a5434d@suse.de>
Date:   Thu, 12 May 2022 08:23:52 +0200
From:   Hannes Reinecke <hare@...e.de>
To:     Serge Semin <Sergey.Semin@...kalelectronics.ru>,
        Damien Le Moal <damien.lemoal@...nsource.wdc.com>,
        Hans de Goede <hdegoede@...hat.com>,
        Jens Axboe <axboe@...nel.dk>, Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Linus Walleij <linus.walleij@...aro.org>
Cc:     Serge Semin <fancer.lancer@...il.com>,
        Alexey Malahov <Alexey.Malahov@...kalelectronics.ru>,
        Pavel Parkhomenko <Pavel.Parkhomenko@...kalelectronics.ru>,
        linux-ide@...r.kernel.org, linux-kernel@...r.kernel.org,
        devicetree@...r.kernel.org
Subject: Re: [PATCH v3 04/23] dt-bindings: ata: sata: Extend number of SATA
 ports

On 5/12/22 01:17, Serge Semin wrote:
> The denoted in the description upper limit only concerns the Port
> Multipliers, but not the actual SATA ports. It's an external device
> attached to a SATA port in order to access more than one SATA-drive. So
> when it's attached to a SATA port it just extends the port capability
> while the number of actual SATA ports stays the same. For instance on AHCI
> controllers the number of actual ports is determined by the CAP.NP field
> and the PI (Ports Implemented) register. AFAICS in general the maximum
> number of SATA ports depends on the particular controller implementation.
> Generic AHCI controller can't have more than 32 ports (since CAP.NP is of
> 5 bits wide and PI register is 32-bits size), while DWC AHCI SATA
> controller can't be configured with more than 8 ports activated. So let's
> discard the SATA ports reg-property restrictions and just make sure that
> it consists of a single reg-item.
> 
> Signed-off-by: Serge Semin <Sergey.Semin@...kalelectronics.ru>
> 
> ---
> 
> Changelog v2:
> - Add comma and replace "channel" with "SATA port" in the reg property
>    description (@Damien).
> ---
>   Documentation/devicetree/bindings/ata/sata-common.yaml | 7 +++----
>   1 file changed, 3 insertions(+), 4 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/ata/sata-common.yaml b/Documentation/devicetree/bindings/ata/sata-common.yaml
> index 7ac77b1c5850..9c9c621761ca 100644
> --- a/Documentation/devicetree/bindings/ata/sata-common.yaml
> +++ b/Documentation/devicetree/bindings/ata/sata-common.yaml
> @@ -41,11 +41,10 @@ patternProperties:
>       properties:
>         reg:
>           minimum: 0
> -        maximum: 14
>           description:
> -          The ID number of the drive port SATA can potentially use a port
> -          multiplier making it possible to connect up to 15 disks to a single
> -          SATA port.
> +          The ID number of the SATA port. Aside with being directly used,
> +          each port can have a Port Multiplier attached thus allowing to
> +          access more than one drive by means of a single SATA port.
>   
>   additionalProperties: true
>   
Reviewed-by: Hannes Reinecke <hare@...e.de>

Cheers,

Hannes
-- 
Dr. Hannes Reinecke		           Kernel Storage Architect
hare@...e.de			                  +49 911 74053 688
SUSE Software Solutions Germany GmbH, Maxfeldstr. 5, 90409 Nürnberg
HRB 36809 (AG Nürnberg), GF: Felix Imendörffer