linux-kernel - Re: [PATCH V2 3/6] iio: accel: bmi088: modified the device name

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CA+U=Dsqu_5JVyhs8juznQ5SyBx1V6Q5yT-fsnYuoYHX9ESE=Tg@mail.gmail.com>
Date:   Thu, 12 May 2022 10:31:48 +0300
From:   Alexandru Ardelean <ardeleanalex@...il.com>
To:     LI Qingwu <Qing-wu.Li@...ca-geosystems.com.cn>
Cc:     Jonathan Cameron <jic23@...nel.org>,
        Lars-Peter Clausen <lars@...afoo.de>,
        mchehab+huawei@...nel.org, linux-iio <linux-iio@...r.kernel.org>,
        LKML <linux-kernel@...r.kernel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Mike Looijmans <mike.looijmans@...ic.nl>,
        devicetree <devicetree@...r.kernel.org>
Subject: Re: [PATCH V2 3/6] iio: accel: bmi088: modified the device name

On Tue, May 10, 2022 at 5:18 PM LI Qingwu
<Qing-wu.Li@...ca-geosystems.com.cn> wrote:
>
> It is possible to have multiple sensors connected on the same platform,
> To support multiple sensors, the commit makes it possible to obtain the
> device name by reading the chip ID instead of the device-tree name.
> To be compatible with previous versions, renam bmi088a to bmi088-accel.

// my spellcheck in GMail found this :p

typo: renam -> rename

I also have a comment about a duplication that is highlighted by this change.

You can disregard my comment about the duplication and leave this change as-is.

>
> Signed-off-by: LI Qingwu <Qing-wu.Li@...ca-geosystems.com.cn>
> ---
>  drivers/iio/accel/bmi088-accel-core.c | 6 +++---
>  drivers/iio/accel/bmi088-accel-spi.c  | 4 +---
>  drivers/iio/accel/bmi088-accel.h      | 2 +-
>  3 files changed, 5 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/iio/accel/bmi088-accel-core.c b/drivers/iio/accel/bmi088-accel-core.c
> index 8fee1d02e773..de2385e4dad5 100644
> --- a/drivers/iio/accel/bmi088-accel-core.c
> +++ b/drivers/iio/accel/bmi088-accel-core.c
> @@ -459,7 +459,7 @@ static const struct iio_chan_spec bmi088_accel_channels[] = {
>
>  static const struct bmi088_accel_chip_info bmi088_accel_chip_info_tbl[] = {
>         [0] = {
> -               .name = "bmi088a",
> +               .name = "bmi088-accel",
>                 .chip_id = 0x1E,
>                 .channels = bmi088_accel_channels,
>                 .num_channels = ARRAY_SIZE(bmi088_accel_channels),
> @@ -524,7 +524,7 @@ static int bmi088_accel_chip_init(struct bmi088_accel_data *data)
>  }
>
>  int bmi088_accel_core_probe(struct device *dev, struct regmap *regmap,
> -       int irq, const char *name, bool block_supported)
> +       int irq, bool block_supported)
>  {
>         struct bmi088_accel_data *data;
>         struct iio_dev *indio_dev;
> @@ -545,7 +545,7 @@ int bmi088_accel_core_probe(struct device *dev, struct regmap *regmap,
>
>         indio_dev->channels = data->chip_info->channels;
>         indio_dev->num_channels = data->chip_info->num_channels;
> -       indio_dev->name = name ? name : data->chip_info->name;
> +       indio_dev->name = data->chip_info->name;

(with this change) i can better see, a bit of duplication between the
spi_device table and the chip_info table

this was not introduced by this change, but it was made a bit more
obvious by this change;

one way to address this, is to remove the `const char *name;` and
continue using the `name` provided as a parameter from
bmi088_accel_core_probe();
(apologies if I seem to have changed my mind (from the previous
changeset), but I did not see it too well before)

and we can convert

enum {
   ID_BMI088,
   ID_BMI085,
   ...
};

 static const struct bmi088_accel_chip_info bmi088_accel_chip_info_tbl[] = {
         [ID_BMI088] = {
                 .chip_id = 0x1E,
                 .channels = bmi088_accel_channels,
                .num_channels = ARRAY_SIZE(bmi088_accel_channels),
        },
         [ID_BMI085] = {
         ........

>         indio_dev->available_scan_masks = bmi088_accel_scan_masks;
>         indio_dev->modes = INDIO_DIRECT_MODE;
>         indio_dev->info = &bmi088_accel_info;
> diff --git a/drivers/iio/accel/bmi088-accel-spi.c b/drivers/iio/accel/bmi088-accel-spi.c
> index dd1e3f6cf211..0fed0081e1fd 100644
> --- a/drivers/iio/accel/bmi088-accel-spi.c
> +++ b/drivers/iio/accel/bmi088-accel-spi.c
> @@ -42,7 +42,6 @@ static struct regmap_bus bmi088_regmap_bus = {
>  static int bmi088_accel_probe(struct spi_device *spi)
>  {
>         struct regmap *regmap;
> -       const struct spi_device_id *id = spi_get_device_id(spi);
>
>         regmap = devm_regmap_init(&spi->dev, &bmi088_regmap_bus,
>                         spi, &bmi088_regmap_conf);
> @@ -52,8 +51,7 @@ static int bmi088_accel_probe(struct spi_device *spi)
>                 return PTR_ERR(regmap);
>         }
>
> -       return bmi088_accel_core_probe(&spi->dev, regmap, spi->irq, id->name,
> -                                      true);
> +       return bmi088_accel_core_probe(&spi->dev, regmap, spi->irq, true);
>  }
>
>  static int bmi088_accel_remove(struct spi_device *spi)
> diff --git a/drivers/iio/accel/bmi088-accel.h b/drivers/iio/accel/bmi088-accel.h
> index 5c25f16b672c..c32afe9606a8 100644
> --- a/drivers/iio/accel/bmi088-accel.h
> +++ b/drivers/iio/accel/bmi088-accel.h
> @@ -12,7 +12,7 @@ extern const struct regmap_config bmi088_regmap_conf;
>  extern const struct dev_pm_ops bmi088_accel_pm_ops;
>
>  int bmi088_accel_core_probe(struct device *dev, struct regmap *regmap, int irq,
> -                           const char *name, bool block_supported);
> +                           bool block_supported);
>  int bmi088_accel_core_remove(struct device *dev);
>
>  #endif /* BMI088_ACCEL_H */
> --
> 2.25.1
>