[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20220516184912.GA3063673-robh@kernel.org>
Date: Mon, 16 May 2022 13:49:12 -0500
From: Rob Herring <robh@...nel.org>
To: Ansuel Smith <ansuelsmth@...il.com>
Cc: Andy Gross <agross@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Manivannan Sadhasivam <mani@...nel.org>,
Miquel Raynal <miquel.raynal@...tlin.com>,
Richard Weinberger <richard@....at>,
Vignesh Raghavendra <vigneshr@...com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
linux-arm-msm@...r.kernel.org, linux-mtd@...ts.infradead.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 2/2] dt-bindings: mtd: qcom_nandc: document
qcom,boot-pages binding
On Tue, May 03, 2022 at 05:43:53PM +0200, Ansuel Smith wrote:
> Document new qcom,boot_pages binding used to apply special
s/boot_pages/boot-pages/
> read/write configuration to boot pages.
>
> QCOM apply a special configuration where spare data is not protected
> by ECC for some special pages (used for boot partition). Add
> Documentation on how to declare these special pages.
>
> Signed-off-by: Ansuel Smith <ansuelsmth@...il.com>
> ---
> .../devicetree/bindings/mtd/qcom,nandc.yaml | 22 +++++++++++++++++++
> 1 file changed, 22 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
> index 84ad7ff30121..fafeca0cafff 100644
> --- a/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
> +++ b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
> @@ -102,6 +102,26 @@ allOf:
> - const: rx
> - const: cmd
>
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - qcom,ipq8074-nand
> +
> + then:
> + properties:
> + qcom,boot-pages:
> + $ref: /schemas/types.yaml#/definitions/uint32-matrix
You need to define the dimensions. Something like this:
items:
items:
- description: offset
- description: size
> + description:
> + Some special page used by boot partition have spare data
> + not protected by ECC. Use this to declare these special page
> + by defining first the offset and then the size.
> +
> + It's in the form of <offset1 size1 offset2 size2 offset3 ...>
> +
> + Refer to the ipq8064 example on how to use this special binding.
> +
> required:
> - compatible
> - reg
> @@ -135,6 +155,8 @@ examples:
> nand-ecc-strength = <4>;
> nand-bus-width = <8>;
>
> + qcom,boot-pages = <0x0 0x58a0000>;
> +
> partitions {
> compatible = "fixed-partitions";
> #address-cells = <1>;
> --
> 2.34.1
>
>
Powered by blists - more mailing lists