[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <DM6PR04MB65750969ACD36EEEB48374DFFCD69@DM6PR04MB6575.namprd04.prod.outlook.com>
Date: Wed, 25 May 2022 18:34:34 +0000
From: Avri Altman <Avri.Altman@....com>
To: Nia Espera <a5b6@...eup.net>,
Alim Akhtar <alim.akhtar@...sung.com>,
"James E . J . Bottomley" <jejb@...ux.ibm.com>,
"Martin K . Petersen" <martin.petersen@...cle.com>,
"linux-scsi@...r.kernel.org" <linux-scsi@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
CC: "~postmarketos/upstreaming@...ts.sr.ht"
<~postmarketos/upstreaming@...ts.sr.ht>,
"phone-devel@...r.kernel.org" <phone-devel@...r.kernel.org>
Subject: RE: [RESEND PATCH] scsi: ufs: sysfs: support writing boot_lun attr
Hi,
> Expands sysfs boot_lun attribute to be writable. Necessary to enable
> proper support for LUN switching on some UFS devices.
Can you please elaborate why is it necessary?
What use case are you running?
>
> Signed-off-by: Nia Espera <a5b6@...eup.net>
> ---
> drivers/scsi/ufs/ufs-sysfs.c | 67 +++++++++++++++++++++++++++++++++++-
> 1 file changed, 66 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/scsi/ufs/ufs-sysfs.c b/drivers/scsi/ufs/ufs-sysfs.c
> index 5c405ff7b6ea..7bf5d6c3d0ec 100644
> --- a/drivers/scsi/ufs/ufs-sysfs.c
> +++ b/drivers/scsi/ufs/ufs-sysfs.c
> @@ -1047,6 +1047,71 @@ static inline bool ufshcd_is_wb_attrs(enum attr_idn
> idn)
> idn <= QUERY_ATTR_IDN_CURR_WB_BUFF_SIZE;
> }
>
> +static ssize_t boot_lun_enabled_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct ufs_hba *hba = dev_get_drvdata(dev);
> + u32 slot;
> + int ret;
> + u8 index = 0;
> +
> + down(&hba->host_sem);
> + if (!ufshcd_is_user_access_allowed(hba)) {
> + up(&hba->host_sem);
> + return -EBUSY;
> + }
> + if (ufshcd_is_wb_attrs(QUERY_ATTR_IDN_BOOT_LU_EN))
Clearly bBootLunEn is not a WB attribute.
> + index = ufshcd_wb_get_query_index(hba);
> + ufshcd_rpm_get_sync(hba);
> +
> + ret = ufshcd_query_attr(hba, UPIU_QUERY_OPCODE_READ_ATTR,
> + QUERY_ATTR_IDN_BOOT_LU_EN, index, 0, &slot);
> +
> + ufshcd_rpm_put_sync(hba);
> + if (ret) {
> + ret = -EINVAL;
> + goto out;
> + }
> +
> + ret = sysfs_emit(buf, "0x%08X\n", slot);
> +out:
> + up(&hba->host_sem);
> + return ret;
> +}
> +
> +static ssize_t boot_lun_enabled_store(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct ufs_hba *hba = dev_get_drvdata(dev);
> + u32 slot;
> + int ret;
> + u8 index = 0;
> +
> + if (kstrtouint(buf, 0, &slot) < 0)
> + return -EINVAL;
You need to verify that no one set bBootLunEn = 0x0 because the device won't boot.
Better check explicitly that slot != bBootLunEn and its either 1 or 2.
Thanks,
Avri
> +
> + down(&hba->host_sem);
> + if (!ufshcd_is_user_access_allowed(hba)) {
> + up(&hba->host_sem);
> + return -EBUSY;
> + }
> + if (ufshcd_is_wb_attrs(QUERY_ATTR_IDN_BOOT_LU_EN))
> + index = ufshcd_wb_get_query_index(hba);
> + ufshcd_rpm_get_sync(hba);
> +
> + ret = ufshcd_query_attr_retry(hba, UPIU_QUERY_OPCODE_WRITE_ATTR,
> + QUERY_ATTR_IDN_BOOT_LU_EN, index, 0, &slot);
> + ufshcd_rpm_put_sync(hba);
> + if (ret) {
> + ret = -EINVAL;
> + goto out;
> + }
> +out:
> + up(&hba->host_sem);
> + return ret ? ret : count;
> +}
> +
> #define UFS_ATTRIBUTE(_name, _uname) \
> static ssize_t _name##_show(struct device *dev, \
> struct device_attribute *attr, char *buf) \
> @@ -1077,8 +1142,8 @@ out: \
> return ret; \
> } \
> static DEVICE_ATTR_RO(_name)
> +static DEVICE_ATTR_RW(boot_lun_enabled);
>
> -UFS_ATTRIBUTE(boot_lun_enabled, _BOOT_LU_EN);
> UFS_ATTRIBUTE(max_data_size_hpb_single_cmd, _MAX_HPB_SINGLE_CMD);
> UFS_ATTRIBUTE(current_power_mode, _POWER_MODE);
> UFS_ATTRIBUTE(active_icc_level, _ACTIVE_ICC_LVL);
> --
> 2.36.1
Powered by blists - more mailing lists