[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <8d25171a-5d86-9acc-0f94-1a3c6efdb360@riseup.net>
Date: Thu, 26 May 2022 23:12:19 +0300
From: - <a5b6@...eup.net>
To: Avri Altman <Avri.Altman@....com>,
Alim Akhtar <alim.akhtar@...sung.com>,
"James E . J . Bottomley" <jejb@...ux.ibm.com>,
"Martin K . Petersen" <martin.petersen@...cle.com>,
"linux-scsi@...r.kernel.org" <linux-scsi@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Cc: "~postmarketos/upstreaming@...ts.sr.ht"
<~postmarketos/upstreaming@...ts.sr.ht>,
"phone-devel@...r.kernel.org" <phone-devel@...r.kernel.org>
Subject: Re: [RESEND PATCH] scsi: ufs: sysfs: support writing boot_lun attr
Hi,
My usecase is enabling boot slot switching on Android A/B devices, where
the active LUN has to be changed in order to facilitate e.g. dual-booting
Android and mainline Linux. A similar interface is exposed by Android,
albeit
via ioctl. I've tested this patch and confirmed it enabled the necessary
functionality.
On 25/05/2022 21:34, Avri Altman wrote:
> Hi,
>> Expands sysfs boot_lun attribute to be writable. Necessary to enable
>> proper support for LUN switching on some UFS devices.
> Can you please elaborate why is it necessary?
> What use case are you running?
>
>> Signed-off-by: Nia Espera <a5b6@...eup.net>
>> ---
>> drivers/scsi/ufs/ufs-sysfs.c | 67 +++++++++++++++++++++++++++++++++++-
>> 1 file changed, 66 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/scsi/ufs/ufs-sysfs.c b/drivers/scsi/ufs/ufs-sysfs.c
>> index 5c405ff7b6ea..7bf5d6c3d0ec 100644
>> --- a/drivers/scsi/ufs/ufs-sysfs.c
>> +++ b/drivers/scsi/ufs/ufs-sysfs.c
>> @@ -1047,6 +1047,71 @@ static inline bool ufshcd_is_wb_attrs(enum attr_idn
>> idn)
>> idn <= QUERY_ATTR_IDN_CURR_WB_BUFF_SIZE;
>> }
>>
>> +static ssize_t boot_lun_enabled_show(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct ufs_hba *hba = dev_get_drvdata(dev);
>> + u32 slot;
>> + int ret;
>> + u8 index = 0;
>> +
>> + down(&hba->host_sem);
>> + if (!ufshcd_is_user_access_allowed(hba)) {
>> + up(&hba->host_sem);
>> + return -EBUSY;
>> + }
>> + if (ufshcd_is_wb_attrs(QUERY_ATTR_IDN_BOOT_LU_EN))
> Clearly bBootLunEn is not a WB attribute.
>
>> + index = ufshcd_wb_get_query_index(hba);
>> + ufshcd_rpm_get_sync(hba);
>> +
>> + ret = ufshcd_query_attr(hba, UPIU_QUERY_OPCODE_READ_ATTR,
>> + QUERY_ATTR_IDN_BOOT_LU_EN, index, 0, &slot);
>> +
>> + ufshcd_rpm_put_sync(hba);
>> + if (ret) {
>> + ret = -EINVAL;
>> + goto out;
>> + }
>> +
>> + ret = sysfs_emit(buf, "0x%08X\n", slot);
>> +out:
>> + up(&hba->host_sem);
>> + return ret;
>> +}
>> +
>> +static ssize_t boot_lun_enabled_store(struct device *dev,
>> + struct device_attribute *attr,
>> + const char *buf, size_t count)
>> +{
>> + struct ufs_hba *hba = dev_get_drvdata(dev);
>> + u32 slot;
>> + int ret;
>> + u8 index = 0;
>> +
>> + if (kstrtouint(buf, 0, &slot) < 0)
>> + return -EINVAL;
> You need to verify that no one set bBootLunEn = 0x0 because the device won't boot.
> Better check explicitly that slot != bBootLunEn and its either 1 or 2.
>
> Thanks,
> Avri
>
>> +
>> + down(&hba->host_sem);
>> + if (!ufshcd_is_user_access_allowed(hba)) {
>> + up(&hba->host_sem);
>> + return -EBUSY;
>> + }
>> + if (ufshcd_is_wb_attrs(QUERY_ATTR_IDN_BOOT_LU_EN))
>> + index = ufshcd_wb_get_query_index(hba);
>> + ufshcd_rpm_get_sync(hba);
>> +
>> + ret = ufshcd_query_attr_retry(hba, UPIU_QUERY_OPCODE_WRITE_ATTR,
>> + QUERY_ATTR_IDN_BOOT_LU_EN, index, 0, &slot);
>> + ufshcd_rpm_put_sync(hba);
>> + if (ret) {
>> + ret = -EINVAL;
>> + goto out;
>> + }
>> +out:
>> + up(&hba->host_sem);
>> + return ret ? ret : count;
>> +}
>> +
>> #define UFS_ATTRIBUTE(_name, _uname) \
>> static ssize_t _name##_show(struct device *dev, \
>> struct device_attribute *attr, char *buf) \
>> @@ -1077,8 +1142,8 @@ out: \
>> return ret; \
>> } \
>> static DEVICE_ATTR_RO(_name)
>> +static DEVICE_ATTR_RW(boot_lun_enabled);
>>
>> -UFS_ATTRIBUTE(boot_lun_enabled, _BOOT_LU_EN);
>> UFS_ATTRIBUTE(max_data_size_hpb_single_cmd, _MAX_HPB_SINGLE_CMD);
>> UFS_ATTRIBUTE(current_power_mode, _POWER_MODE);
>> UFS_ATTRIBUTE(active_icc_level, _ACTIVE_ICC_LVL);
>> --
>> 2.36.1
Powered by blists - more mailing lists