| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220525135758.2944744-16-linux@roeck-us.net>
Date: Wed, 25 May 2022 06:57:33 -0700
From: Guenter Roeck <linux@...ck-us.net>
To: linux-hwmon@...r.kernel.org
Cc: linux-kernel@...r.kernel.org, Jean Delvare <jdelvare@...e.com>,
Slawomir Stepien <sst@...zta.fm>,
Guenter Roeck <linux@...ck-us.net>
Subject: [PATCH 15/40] hwmon: (lm90) Rework detect function
The detect function is getting larger and larger and difficult to
understand or review. Split it into per-manufacturer detect functions
to improve readability.
Signed-off-by: Guenter Roeck <linux@...ck-us.net>
---
drivers/hwmon/lm90.c | 379 +++++++++++++++++++++++++++----------------
1 file changed, 236 insertions(+), 143 deletions(-)
diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
index a0a91aa66177..f676b809c470 100644
--- a/drivers/hwmon/lm90.c
+++ b/drivers/hwmon/lm90.c
@@ -1498,78 +1498,88 @@ static umode_t lm90_is_visible(const void *data, enum hwmon_sensor_types type,
}
}
-/* Return 0 if detection is successful, -ENODEV otherwise */
-static int lm90_detect(struct i2c_client *client,
- struct i2c_board_info *info)
+/*
+ * Per-manufacturer chip detect functions.
+ * Functions are expected to return a pointer to the chip name or NULL
+ * if detection was not successful.
+ */
+
+static const char *lm90_detect_national(struct i2c_client *client, int chip_id,
+ int config1, int convrate)
{
- struct i2c_adapter *adapter = client->adapter;
+ int config2 = i2c_smbus_read_byte_data(client, LM90_REG_CONFIG2);
int address = client->addr;
const char *name = NULL;
- int man_id, chip_id, config1, config2, convrate;
- if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
- return -ENODEV;
+ if (config2 < 0)
+ return NULL;
- /* detection and identification */
- man_id = i2c_smbus_read_byte_data(client, LM90_REG_MAN_ID);
- chip_id = i2c_smbus_read_byte_data(client, LM90_REG_CHIP_ID);
- config1 = i2c_smbus_read_byte_data(client, LM90_REG_CONFIG1);
- convrate = i2c_smbus_read_byte_data(client, LM90_REG_CONVRATE);
- if (man_id < 0 || chip_id < 0 || config1 < 0 || convrate < 0)
- return -ENODEV;
+ if ((config1 & 0x2a) || (config2 & 0xf8) || convrate > 0x09)
+ return NULL;
- if (man_id == 0x01 || man_id == 0x5C || man_id == 0xA1) {
- config2 = i2c_smbus_read_byte_data(client, LM90_REG_CONFIG2);
- if (config2 < 0)
- return -ENODEV;
+ if (address != 0x4c && address != 0x4d)
+ return NULL;
+
+ switch (chip_id & 0xf0) {
+ case 0x10: /* LM86 */
+ if (address == 0x4c)
+ name = "lm86";
+ break;
+ case 0x20: /* LM90 */
+ if (address == 0x4c)
+ name = "lm90";
+ break;
+ case 0x30: /* LM89/LM99 */
+ name = "lm99"; /* detect LM89 as LM99 */
+ break;
+ default:
+ break;
}
- if ((address == 0x4C || address == 0x4D)
- && man_id == 0x01) { /* National Semiconductor */
- if ((config1 & 0x2A) == 0x00
- && (config2 & 0xF8) == 0x00
- && convrate <= 0x09) {
- if (address == 0x4C
- && (chip_id & 0xF0) == 0x20) { /* LM90 */
- name = "lm90";
- } else
- if ((chip_id & 0xF0) == 0x30) { /* LM89/LM99 */
- name = "lm99";
- dev_info(&adapter->dev,
- "Assuming LM99 chip at 0x%02x\n",
- address);
- dev_info(&adapter->dev,
- "If it is an LM89, instantiate it "
- "with the new_device sysfs "
- "interface\n");
- } else
- if (address == 0x4C
- && (chip_id & 0xF0) == 0x10) { /* LM86 */
- name = "lm86";
- }
- }
- } else
- if ((address == 0x4C || address == 0x4D)
- && man_id == 0x41) { /* Analog Devices */
- if ((chip_id & 0xF0) == 0x40 /* ADM1032 */
- && (config1 & 0x3F) == 0x00
- && convrate <= 0x0A) {
+ return name;
+}
+
+static const char *lm90_detect_analog(struct i2c_client *client, int chip_id,
+ int config1, int convrate)
+{
+ int address = client->addr;
+ const char *name = NULL;
+
+ switch (chip_id) {
+ case 0x40 ... 0x4f: /* ADM1032 */
+ if ((address == 0x4c || address == 0x4d) && !(config1 & 0x3f) &&
+ convrate <= 0x0a)
name = "adm1032";
- } else
- if (chip_id == 0x51 /* ADT7461 */
- && (config1 & 0x1B) == 0x00
- && convrate <= 0x0A) {
+ break;
+ case 0x51: /* ADT7461 */
+ if ((address == 0x4c || address == 0x4d) && !(config1 & 0x1b) &&
+ convrate <= 0x0a)
name = "adt7461";
- } else
- if (chip_id == 0x57 /* ADT7461A, NCT1008 */
- && (config1 & 0x1B) == 0x00
- && convrate <= 0x0A) {
+ break;
+ case 0x57: /* ADT7461A, NCT1008 */
+ if ((address == 0x4c || address == 0x4d) && !(config1 & 0x1b) &&
+ convrate <= 0x0a)
name = "adt7461a";
- }
- } else
- if (man_id == 0x4D) { /* Maxim */
- int emerg, emerg2, status2;
+ break;
+ default:
+ break;
+ }
+ return name;
+}
+
+static const char *lm90_detect_maxim(struct i2c_client *client, int chip_id,
+ int config1, int convrate)
+{
+ int man_id, emerg, emerg2, status2;
+ int address = client->addr;
+ const char *name = NULL;
+
+ if ((address >= 0x48 && address <= 0x4b) || address == 0x4f)
+ return NULL;
+
+ switch (chip_id) {
+ case 0x01:
/*
* We read MAX6659_REG_REMOTE_EMERG twice, and re-read
* LM90_REG_MAN_ID in between. If MAX6659_REG_REMOTE_EMERG
@@ -1585,30 +1595,8 @@ static int lm90_detect(struct i2c_client *client,
status2 = i2c_smbus_read_byte_data(client,
MAX6696_REG_STATUS2);
if (emerg < 0 || man_id < 0 || emerg2 < 0 || status2 < 0)
- return -ENODEV;
+ return NULL;
- /*
- * The MAX6657, MAX6658 and MAX6659 do NOT have a chip_id
- * register. Reading from that address will return the last
- * read value, which in our case is those of the man_id
- * register. Likewise, the config1 register seems to lack a
- * low nibble, so the value will be those of the previous
- * read, so in our case those of the man_id register.
- * MAX6659 has a third set of upper temperature limit registers.
- * Those registers also return values on MAX6657 and MAX6658,
- * thus the only way to detect MAX6659 is by its address.
- * For this reason it will be mis-detected as MAX6657 if its
- * address is 0x4C.
- */
- if (chip_id == man_id
- && (address == 0x4C || address == 0x4D || address == 0x4E)
- && (config1 & 0x1F) == (man_id & 0x0F)
- && convrate <= 0x09) {
- if (address == 0x4C)
- name = "max6657";
- else
- name = "max6659";
- } else
/*
* Even though MAX6695 and MAX6696 do not have a chip ID
* register, reading it returns 0x01. Bit 4 of the config1
@@ -1620,77 +1608,137 @@ static int lm90_detect(struct i2c_client *client,
* limit registers. We can detect those chips by checking if
* one of those registers exists.
*/
- if (chip_id == 0x01
- && (config1 & 0x10) == 0x00
- && (status2 & 0x01) == 0x00
- && emerg == emerg2
- && convrate <= 0x07) {
+ if (!(config1 & 0x10) && !(status2 & 0x01) && emerg == emerg2 &&
+ convrate <= 0x07)
name = "max6696";
- } else
/*
* The chip_id register of the MAX6680 and MAX6681 holds the
* revision of the chip. The lowest bit of the config1 register
* is unused and should return zero when read, so should the
* second to last bit of config1 (software reset).
*/
- if (chip_id == 0x01
- && (config1 & 0x03) == 0x00
- && convrate <= 0x07) {
+ else if (!(config1 & 0x03) && convrate <= 0x07)
name = "max6680";
- } else
- /*
- * The chip_id register of the MAX6646/6647/6649 holds the
- * revision of the chip. The lowest 6 bits of the config1
- * register are unused and should return zero when read.
- */
- if (chip_id == 0x59
- && (config1 & 0x3f) == 0x00
- && convrate <= 0x07) {
- name = "max6646";
- } else
+ break;
+ case 0x08:
/*
* The chip_id of the MAX6654 holds the revision of the chip.
* The lowest 3 bits of the config1 register are unused and
* should return zero when read.
*/
- if (chip_id == 0x08
- && (config1 & 0x07) == 0x00
- && convrate <= 0x07) {
+ if (!(config1 & 0x07) && convrate <= 0x07)
name = "max6654";
+ break;
+ case 0x4d:
+ /*
+ * The MAX6657, MAX6658 and MAX6659 do NOT have a chip_id
+ * register. Reading from that address will return the last
+ * read value, which in our case is those of the man_id
+ * register, or 0x4d. Likewise, the config1 register seems to
+ * lack a low nibble, so the value will be those of the previous
+ * read, so in our case again those of the man_id register.
+ * MAX6659 has a third set of upper temperature limit registers.
+ * Those registers also return values on MAX6657 and MAX6658,
+ * thus the only way to detect MAX6659 is by its address.
+ * For this reason it will be mis-detected as MAX6657 if its
+ * address is 0x4c.
+ */
+ if ((address == 0x4c || address == 0x4d || address == 0x4e) &&
+ (config1 & 0x1f) == 0x0d && convrate <= 0x09) {
+ if (address == 0x4c)
+ name = "max6657";
+ else
+ name = "max6659";
}
- } else
- if (address == 0x4C
- && man_id == 0x5C) { /* Winbond/Nuvoton */
- if ((config1 & 0x2A) == 0x00
- && (config2 & 0xF8) == 0x00) {
- if (chip_id == 0x01 /* W83L771W/G */
- && convrate <= 0x09) {
- name = "w83l771";
- } else
- if ((chip_id & 0xFE) == 0x10 /* W83L771AWG/ASG */
- && convrate <= 0x08) {
- name = "w83l771";
+ break;
+ case 0x59:
+ /*
+ * The chip_id register of the MAX6646/6647/6649 holds the
+ * revision of the chip. The lowest 6 bits of the config1
+ * register are unused and should return zero when read.
+ */
+ if (!(config1 & 0x3f) && convrate <= 0x07) {
+ switch (address) {
+ case 0x4c:
+ name = "max6649";
+ break;
+ case 0x4d:
+ name = "max6646";
+ break;
+ case 0x4e:
+ name = "max6647";
+ break;
+ default:
+ break;
}
}
- } else
- if (address >= 0x48 && address <= 0x4F
- && man_id == 0xA1) { /* NXP Semiconductor/Philips */
- if (chip_id == 0x00
- && (config1 & 0x2A) == 0x00
- && (config2 & 0xFE) == 0x00
- && convrate <= 0x09) {
- name = "sa56004";
+ break;
+ default:
+ break;
+ }
+
+ return name;
+}
+
+static const char *lm90_detect_nuvoton(struct i2c_client *client, int chip_id,
+ int config1, int convrate)
+{
+ int config2 = i2c_smbus_read_byte_data(client, LM90_REG_CONFIG2);
+ int address = client->addr;
+ const char *name = NULL;
+
+ if (config2 < 0)
+ return ERR_PTR(-ENODEV);
+
+ if (address == 0x4c && !(config1 & 0x2a) && !(config2 & 0xf8)) {
+ if (chip_id == 0x01 && convrate <= 0x09) {
+ /* W83L771W/G */
+ name = "w83l771";
+ } else if ((chip_id & 0xfe) == 0x10 && convrate <= 0x08) {
+ /* W83L771AWG/ASG */
+ name = "w83l771";
}
- } else
- if ((address == 0x4C || address == 0x4D)
- && man_id == 0x47) { /* GMT */
- if (chip_id == 0x01 /* G781 */
- && (config1 & 0x3F) == 0x00
- && convrate <= 0x08)
- name = "g781";
- } else
- if (man_id == 0x55 && chip_id == 0x00 &&
- (config1 & 0x1B) == 0x00 && convrate <= 0x09) {
+ }
+ return name;
+}
+
+static const char *lm90_detect_nxp(struct i2c_client *client, int chip_id,
+ int config1, int convrate)
+{
+ int config2 = i2c_smbus_read_byte_data(client, LM90_REG_CONFIG2);
+ int address = client->addr;
+ const char *name = NULL;
+
+ if (config2 < 0)
+ return NULL;
+
+ if (address >= 0x48 && address <= 0x4f && chip_id == 0x00 &&
+ !(config1 & 0x2a) && !(config2 & 0xfe) && convrate <= 0x09)
+ name = "sa56004";
+
+ return name;
+}
+
+static const char *lm90_detect_gmt(struct i2c_client *client, int chip_id,
+ int config1, int convrate)
+{
+ int address = client->addr;
+ const char *name = NULL;
+
+ if ((address == 0x4c || address == 0x4d) && chip_id == 0x01 &&
+ !(config1 & 0x3f) && convrate <= 0x08)
+ name = "g781";
+
+ return name;
+}
+
+static const char *lm90_detect_ti(struct i2c_client *client, int chip_id,
+ int config1, int convrate)
+{
+ int address = client->addr;
+ const char *name = NULL;
+
+ if (chip_id == 0x00 && !(config1 & 0x1b) && convrate <= 0x09) {
int local_ext, conalert, chen, dfc;
local_ext = i2c_smbus_read_byte_data(client,
@@ -1700,10 +1748,8 @@ static int lm90_detect(struct i2c_client *client,
chen = i2c_smbus_read_byte_data(client, TMP461_REG_CHEN);
dfc = i2c_smbus_read_byte_data(client, TMP461_REG_DFC);
- if ((local_ext & 0x0F) == 0x00 &&
- (conalert & 0xf1) == 0x01 &&
- (chen & 0xfc) == 0x00 &&
- (dfc & 0xfc) == 0x00) {
+ if (!(local_ext & 0x0f) && (conalert & 0xf1) == 0x01 &&
+ (chen & 0xfc) == 0x00 && (dfc & 0xfc) == 0x00) {
if (address == 0x4c && !(chen & 0x03))
name = "tmp451";
else if (address >= 0x48 && address <= 0x4f)
@@ -1711,10 +1757,57 @@ static int lm90_detect(struct i2c_client *client,
}
}
- if (!name) { /* identification failed */
+ return name;
+}
+
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int lm90_detect(struct i2c_client *client, struct i2c_board_info *info)
+{
+ struct i2c_adapter *adapter = client->adapter;
+ int man_id, chip_id, config1, convrate;
+ const char *name = NULL;
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+ return -ENODEV;
+
+ /* detection and identification */
+ man_id = i2c_smbus_read_byte_data(client, LM90_REG_MAN_ID);
+ chip_id = i2c_smbus_read_byte_data(client, LM90_REG_CHIP_ID);
+ config1 = i2c_smbus_read_byte_data(client, LM90_REG_CONFIG1);
+ convrate = i2c_smbus_read_byte_data(client, LM90_REG_CONVRATE);
+ if (man_id < 0 || chip_id < 0 || config1 < 0 || convrate < 0)
+ return -ENODEV;
+
+ switch (man_id) {
+ case 0x01: /* National Semiconductor */
+ name = lm90_detect_national(client, chip_id, config1, convrate);
+ break;
+ case 0x41: /* Analog Devices */
+ name = lm90_detect_analog(client, chip_id, config1, convrate);
+ break;
+ case 0x47: /* GMT */
+ name = lm90_detect_gmt(client, chip_id, config1, convrate);
+ break;
+ case 0x4d: /* Maxim Integrated */
+ name = lm90_detect_maxim(client, chip_id, config1, convrate);
+ break;
+ case 0x55: /* TI */
+ name = lm90_detect_ti(client, chip_id, config1, convrate);
+ break;
+ case 0x5c: /* Winbond/Nuvoton */
+ name = lm90_detect_nuvoton(client, chip_id, config1, convrate);
+ break;
+ case 0xa1: /* NXP Semiconductor/Philips */
+ name = lm90_detect_nxp(client, chip_id, config1, convrate);
+ break;
+ default:
+ break;
+ }
+
+ if (!name) { /* identification failed */
dev_dbg(&adapter->dev,
- "Unsupported chip at 0x%02x (man_id=0x%02X, "
- "chip_id=0x%02X)\n", address, man_id, chip_id);
+ "Unsupported chip at 0x%02x (man_id=0x%02X, chip_id=0x%02X)\n",
+ client->addr, man_id, chip_id);
return -ENODEV;
}
--
2.35.1
Powered by blists - more mailing lists