| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220525135758.2944744-25-linux@roeck-us.net>
Date: Wed, 25 May 2022 06:57:42 -0700
From: Guenter Roeck <linux@...ck-us.net>
To: linux-hwmon@...r.kernel.org
Cc: linux-kernel@...r.kernel.org, Jean Delvare <jdelvare@...e.com>,
Slawomir Stepien <sst@...zta.fm>,
Guenter Roeck <linux@...ck-us.net>
Subject: [PATCH 24/40] hwmon: (lm90) Add flag to indicate conversion rate support
A flag indicating support for setting the conversion rate doesn't cost
much and will enable us to add support for MAX6642 to the lm90 driver.
Signed-off-by: Guenter Roeck <linux@...ck-us.net>
---
drivers/hwmon/lm90.c | 66 ++++++++++++++++++++++++++------------------
1 file changed, 39 insertions(+), 27 deletions(-)
diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
index abf1451c5652..90c3a496bb6c 100644
--- a/drivers/hwmon/lm90.c
+++ b/drivers/hwmon/lm90.c
@@ -193,6 +193,7 @@ enum chips { adm1032, adt7461, adt7461a, adt7481, g781, lm86, lm90, lm99,
#define LM90_HAVE_ALARMS BIT(13) /* Create 'alarms' attribute */
#define LM90_HAVE_EXT_UNSIGNED BIT(14) /* extended unsigned temperature*/
#define LM90_HAVE_LOW BIT(15) /* low limits */
+#define LM90_HAVE_CONVRATE BIT(16) /* conversion rate */
/* LM90 status */
#define LM90_STATUS_LTHRM BIT(0) /* local THERM limit tripped */
@@ -371,7 +372,7 @@ static const struct lm90_params lm90_params[] = {
.flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT
| LM90_HAVE_BROKEN_ALERT | LM90_HAVE_CRIT
| LM90_HAVE_PARTIAL_PEC | LM90_HAVE_ALARMS
- | LM90_HAVE_LOW,
+ | LM90_HAVE_LOW | LM90_HAVE_CONVRATE,
.alert_alarms = 0x7c,
.max_convrate = 10,
},
@@ -384,7 +385,7 @@ static const struct lm90_params lm90_params[] = {
.flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT
| LM90_HAVE_BROKEN_ALERT | LM90_HAVE_EXTENDED_TEMP
| LM90_HAVE_CRIT | LM90_HAVE_PARTIAL_PEC
- | LM90_HAVE_ALARMS | LM90_HAVE_LOW,
+ | LM90_HAVE_ALARMS | LM90_HAVE_LOW | LM90_HAVE_CONVRATE,
.alert_alarms = 0x7c,
.max_convrate = 10,
.resolution = 10,
@@ -393,7 +394,7 @@ static const struct lm90_params lm90_params[] = {
.flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT
| LM90_HAVE_BROKEN_ALERT | LM90_HAVE_EXTENDED_TEMP
| LM90_HAVE_CRIT | LM90_HAVE_PEC | LM90_HAVE_ALARMS
- | LM90_HAVE_LOW,
+ | LM90_HAVE_LOW | LM90_HAVE_CONVRATE,
.alert_alarms = 0x7c,
.max_convrate = 10,
},
@@ -401,7 +402,8 @@ static const struct lm90_params lm90_params[] = {
.flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT
| LM90_HAVE_BROKEN_ALERT | LM90_HAVE_EXTENDED_TEMP
| LM90_HAVE_UNSIGNED_TEMP | LM90_HAVE_PEC
- | LM90_HAVE_TEMP3 | LM90_HAVE_CRIT | LM90_HAVE_LOW,
+ | LM90_HAVE_TEMP3 | LM90_HAVE_CRIT | LM90_HAVE_LOW
+ | LM90_HAVE_CONVRATE,
.alert_alarms = 0x1c7c,
.max_convrate = 11,
.resolution = 10,
@@ -410,58 +412,61 @@ static const struct lm90_params lm90_params[] = {
[g781] = {
.flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT
| LM90_HAVE_BROKEN_ALERT | LM90_HAVE_CRIT
- | LM90_HAVE_ALARMS | LM90_HAVE_LOW,
+ | LM90_HAVE_ALARMS | LM90_HAVE_LOW | LM90_HAVE_CONVRATE,
.alert_alarms = 0x7c,
.max_convrate = 7,
},
[lm86] = {
.flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT
- | LM90_HAVE_CRIT | LM90_HAVE_ALARMS | LM90_HAVE_LOW,
+ | LM90_HAVE_CRIT | LM90_HAVE_ALARMS | LM90_HAVE_LOW | LM90_HAVE_CONVRATE,
.alert_alarms = 0x7b,
.max_convrate = 9,
},
[lm90] = {
.flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT
- | LM90_HAVE_CRIT | LM90_HAVE_ALARMS | LM90_HAVE_LOW,
+ | LM90_HAVE_CRIT | LM90_HAVE_ALARMS | LM90_HAVE_LOW | LM90_HAVE_CONVRATE,
.alert_alarms = 0x7b,
.max_convrate = 9,
},
[lm99] = {
.flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT
- | LM90_HAVE_CRIT | LM90_HAVE_ALARMS | LM90_HAVE_LOW,
+ | LM90_HAVE_CRIT | LM90_HAVE_ALARMS | LM90_HAVE_LOW | LM90_HAVE_CONVRATE,
.alert_alarms = 0x7b,
.max_convrate = 9,
},
[max6646] = {
.flags = LM90_HAVE_CRIT | LM90_HAVE_BROKEN_ALERT
- | LM90_HAVE_EXT_UNSIGNED | LM90_HAVE_ALARMS | LM90_HAVE_LOW,
+ | LM90_HAVE_EXT_UNSIGNED | LM90_HAVE_ALARMS | LM90_HAVE_LOW
+ | LM90_HAVE_CONVRATE,
.alert_alarms = 0x7c,
.max_convrate = 6,
.reg_local_ext = MAX6657_REG_LOCAL_TEMPL,
},
[max6648] = {
.flags = LM90_HAVE_UNSIGNED_TEMP | LM90_HAVE_CRIT
- | LM90_HAVE_BROKEN_ALERT | LM90_HAVE_LOW,
+ | LM90_HAVE_BROKEN_ALERT | LM90_HAVE_LOW
+ | LM90_HAVE_CONVRATE,
.alert_alarms = 0x7c,
.max_convrate = 6,
.reg_local_ext = MAX6657_REG_LOCAL_TEMPL,
},
[max6654] = {
- .flags = LM90_HAVE_BROKEN_ALERT | LM90_HAVE_ALARMS | LM90_HAVE_LOW,
+ .flags = LM90_HAVE_BROKEN_ALERT | LM90_HAVE_ALARMS | LM90_HAVE_LOW
+ | LM90_HAVE_CONVRATE,
.alert_alarms = 0x7c,
.max_convrate = 7,
.reg_local_ext = MAX6657_REG_LOCAL_TEMPL,
},
[max6657] = {
.flags = LM90_PAUSE_FOR_CONFIG | LM90_HAVE_CRIT
- | LM90_HAVE_ALARMS | LM90_HAVE_LOW,
+ | LM90_HAVE_ALARMS | LM90_HAVE_LOW | LM90_HAVE_CONVRATE,
.alert_alarms = 0x7c,
.max_convrate = 8,
.reg_local_ext = MAX6657_REG_LOCAL_TEMPL,
},
[max6659] = {
.flags = LM90_HAVE_EMERGENCY | LM90_HAVE_CRIT
- | LM90_HAVE_ALARMS | LM90_HAVE_LOW,
+ | LM90_HAVE_ALARMS | LM90_HAVE_LOW | LM90_HAVE_CONVRATE,
.alert_alarms = 0x7c,
.max_convrate = 8,
.reg_local_ext = MAX6657_REG_LOCAL_TEMPL,
@@ -474,14 +479,14 @@ static const struct lm90_params lm90_params[] = {
*/
.flags = LM90_HAVE_OFFSET | LM90_HAVE_CRIT
| LM90_HAVE_CRIT_ALRM_SWP | LM90_HAVE_BROKEN_ALERT
- | LM90_HAVE_ALARMS | LM90_HAVE_LOW,
+ | LM90_HAVE_ALARMS | LM90_HAVE_LOW | LM90_HAVE_CONVRATE,
.alert_alarms = 0x7c,
.max_convrate = 7,
},
[max6696] = {
.flags = LM90_HAVE_EMERGENCY
| LM90_HAVE_EMERGENCY_ALARM | LM90_HAVE_TEMP3 | LM90_HAVE_CRIT
- | LM90_HAVE_ALARMS | LM90_HAVE_LOW,
+ | LM90_HAVE_ALARMS | LM90_HAVE_LOW | LM90_HAVE_CONVRATE,
.alert_alarms = 0x1c7c,
.max_convrate = 6,
.reg_status2 = MAX6696_REG_STATUS2,
@@ -489,7 +494,7 @@ static const struct lm90_params lm90_params[] = {
},
[w83l771] = {
.flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT | LM90_HAVE_CRIT
- | LM90_HAVE_ALARMS | LM90_HAVE_LOW,
+ | LM90_HAVE_ALARMS | LM90_HAVE_LOW | LM90_HAVE_CONVRATE,
.alert_alarms = 0x7c,
.max_convrate = 8,
},
@@ -500,7 +505,7 @@ static const struct lm90_params lm90_params[] = {
* be set).
*/
.flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT | LM90_HAVE_CRIT
- | LM90_HAVE_ALARMS | LM90_HAVE_LOW,
+ | LM90_HAVE_ALARMS | LM90_HAVE_LOW | LM90_HAVE_CONVRATE,
.alert_alarms = 0x7b,
.max_convrate = 9,
.reg_local_ext = SA56004_REG_LOCAL_TEMPL,
@@ -508,7 +513,8 @@ static const struct lm90_params lm90_params[] = {
[tmp451] = {
.flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT
| LM90_HAVE_BROKEN_ALERT | LM90_HAVE_EXTENDED_TEMP | LM90_HAVE_CRIT
- | LM90_HAVE_UNSIGNED_TEMP | LM90_HAVE_ALARMS | LM90_HAVE_LOW,
+ | LM90_HAVE_UNSIGNED_TEMP | LM90_HAVE_ALARMS | LM90_HAVE_LOW
+ | LM90_HAVE_CONVRATE,
.alert_alarms = 0x7c,
.max_convrate = 9,
.resolution = 12,
@@ -517,7 +523,7 @@ static const struct lm90_params lm90_params[] = {
[tmp461] = {
.flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT
| LM90_HAVE_BROKEN_ALERT | LM90_HAVE_EXTENDED_TEMP | LM90_HAVE_CRIT
- | LM90_HAVE_ALARMS | LM90_HAVE_LOW,
+ | LM90_HAVE_ALARMS | LM90_HAVE_LOW | LM90_HAVE_CONVRATE,
.alert_alarms = 0x7c,
.max_convrate = 9,
.resolution = 12,
@@ -1979,7 +1985,8 @@ static void lm90_restore_conf(void *_data)
cancel_delayed_work_sync(&data->alert_work);
/* Restore initial configuration */
- lm90_write_convrate(data, data->convrate_orig);
+ if (data->flags & LM90_HAVE_CONVRATE)
+ lm90_write_convrate(data, data->convrate_orig);
lm90_write_reg(client, LM90_REG_CONFIG1, data->config_orig);
}
@@ -1988,10 +1995,15 @@ static int lm90_init_client(struct i2c_client *client, struct lm90_data *data)
struct device_node *np = client->dev.of_node;
int config, convrate;
- convrate = lm90_read_reg(client, LM90_REG_CONVRATE);
- if (convrate < 0)
- return convrate;
- data->convrate_orig = convrate;
+ if (data->flags & LM90_HAVE_CONVRATE) {
+ convrate = lm90_read_reg(client, LM90_REG_CONVRATE);
+ if (convrate < 0)
+ return convrate;
+ data->convrate_orig = convrate;
+ lm90_set_convrate(client, data, 500); /* 500ms; 2Hz conversion rate */
+ } else {
+ data->update_interval = 500;
+ }
/*
* Start the conversions.
@@ -2002,8 +2014,6 @@ static int lm90_init_client(struct i2c_client *client, struct lm90_data *data)
data->config_orig = config;
data->config = config;
- lm90_set_convrate(client, data, 500); /* 500ms; 2Hz conversion rate */
-
/* Check Temperature Range Select */
if (data->flags & LM90_HAVE_EXTENDED_TEMP) {
if (of_property_read_bool(np, "ti,extended-range-enable"))
@@ -2154,9 +2164,11 @@ static int lm90_probe(struct i2c_client *client)
info->type = hwmon_chip;
info->config = data->chip_config;
- data->chip_config[0] = HWMON_C_REGISTER_TZ | HWMON_C_UPDATE_INTERVAL;
+ data->chip_config[0] = HWMON_C_REGISTER_TZ;
if (data->flags & LM90_HAVE_ALARMS)
data->chip_config[0] |= HWMON_C_ALARMS;
+ if (data->flags & LM90_HAVE_CONVRATE)
+ data->chip_config[0] |= HWMON_C_UPDATE_INTERVAL;
data->info[1] = &data->temp_info;
--
2.35.1
Powered by blists - more mailing lists