| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220607101710.2833332-2-o.rempel@pengutronix.de>
Date: Tue, 7 Jun 2022 12:17:09 +0200
From: Oleksij Rempel <o.rempel@...gutronix.de>
To: Andrew Lunn <andrew@...n.ch>,
Heiner Kallweit <hkallweit1@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>
Cc: Oleksij Rempel <o.rempel@...gutronix.de>, kernel@...gutronix.de,
linux-kernel@...r.kernel.org, netdev@...r.kernel.org
Subject: [PATCH net-next v1 2/3] net: phy: dp83td510: add cable testing support
Cable testing was tested in different HW configurations and cables:
- SJA1105 + DP83TD510
- ASIX + DP83TD510
- STM32MP1 + DP83TD510
Results provided by this PHY should be interpreted with grain of sold.
For example testing unshielded and shielded twisted pair may give
different results. Nevertheless, it still can be usable.
Signed-off-by: Oleksij Rempel <o.rempel@...gutronix.de>
---
drivers/net/phy/dp83td510.c | 161 ++++++++++++++++++++++++++++++++++++
1 file changed, 161 insertions(+)
diff --git a/drivers/net/phy/dp83td510.c b/drivers/net/phy/dp83td510.c
index 441f77bfc9f2..d0229f3b0181 100644
--- a/drivers/net/phy/dp83td510.c
+++ b/drivers/net/phy/dp83td510.c
@@ -4,6 +4,7 @@
*/
#include <linux/bitfield.h>
+#include <linux/ethtool_netlink.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/phy.h>
@@ -24,6 +25,52 @@
#define DP83TD510E_INT1_LINK BIT(13)
#define DP83TD510E_INT1_LINK_EN BIT(5)
+#define DP83TD510E_TDR_CFG 0x1e
+#define DP83TD510E_TDR_START BIT(15)
+#define DP83TD510E_TDR_DONE BIT(1)
+#define DP83TD510E_TDR_FAIL BIT(0)
+
+#define DP83TD510E_TDR_CFG1 0x300
+
+#define DP83TD510E_TDR_CFG2 0x301
+#define DP83TD510E_TDR_END_TAP_INDEX_1 GENMASK(14, 8)
+#define DP83TD510E_TDR_START_TAP_INDEX_1 GENMASK(6, 0)
+
+#define DP83TD510E_TDR_CFG3 0x302
+#define DP83TD510E_TDR_TX_DURATION_US GENMASK(15, 0)
+
+#define DP83TD510E_TDR_FAULT_CFG1 0x303
+#define DP83TD510E_TDR_FLT_LOC_OFFSET_1 GENMASK(14, 8)
+#define DP83TD510E_TDR_FLT_INIT_1 GENMASK(7, 0)
+
+#define DP83TD510E_TDR_FAULT_CFG2 0x304
+#define DP83TD510E_TDR_FLT_SLOPE_1 GENMASK(7, 0)
+
+#define DP83TD510E_TDR_FAULT_STAT1 0x305
+#define DP83TD510E_TDR_FAULT_STAT2 0x306
+#define DP83TD510E_TDR_FAULT_STAT3 0x307
+#define DP83TD510E_TDR_FAULT_STAT4 0x308
+#define DP83TD510E_TDR_FAULT_STAT5 0x309
+#define DP83TD510E_TDR_FAULT_STAT6 0x30a
+
+#define DP83TD510E_TDR_FAULT_STAT 0x30c
+#define DP83TD510E_TDR_PEAK_DETECT BIT(11)
+#define DP83TD510E_TDR_PEAK_SIGN BIT(10)
+#define DP83TD510E_TDR_PEAK_LOCATION GENMASK(9, 0)
+
+
+/* Not documented registers and values but recommended according to
+ * "DP83TD510E Cable Diagnostics Toolkit"
+ */
+#define DP83TD510E_UNKN_030D 0x30d
+#define DP83TD510E_030D_VAL 0x5f25
+#define DP83TD510E_UNKN_030E 0x30e
+#define DP83TD510E_030E_VAL 0x0536
+#define DP83TD510E_UNKN_030F 0x30f
+#define DP83TD510E_030F_VAL 0x0008
+#define DP83TD510E_UNKN_0310 0x310
+#define DP83TD510E_0310_VAL 0x0036
+
#define DP83TD510E_AN_STAT_1 0x60c
#define DP83TD510E_MASTER_SLAVE_RESOL_FAIL BIT(15)
@@ -218,6 +265,117 @@ static int dp83td510_get_sqi_max(struct phy_device *phydev)
return DP83TD510_SQI_MAX;
}
+/* Configure the TDR circuitry within the PHY as described in
+ * "Application Report - DP83TD510E Cable Diagnostics Toolkit"
+ */
+static int dp83td510_tdr_init(struct phy_device *phydev)
+{
+ int ret;
+
+ ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, DP83TD510E_TDR_CFG2,
+ FIELD_PREP(DP83TD510E_TDR_END_TAP_INDEX_1, 36) |
+ FIELD_PREP(DP83TD510E_TDR_START_TAP_INDEX_1, 4));
+ if (ret)
+ return ret;
+
+ ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, DP83TD510E_UNKN_030D,
+ DP83TD510E_030D_VAL);
+ if (ret)
+ return ret;
+
+ ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, DP83TD510E_TDR_FAULT_CFG1,
+ FIELD_PREP(DP83TD510E_TDR_FLT_LOC_OFFSET_1, 0x5) |
+ FIELD_PREP(DP83TD510E_TDR_FLT_INIT_1, 0x3e));
+ if (ret)
+ return ret;
+
+ ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, DP83TD510E_UNKN_030E,
+ DP83TD510E_030E_VAL);
+ if (ret)
+ return ret;
+
+ ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, DP83TD510E_TDR_FAULT_CFG2,
+ FIELD_PREP(DP83TD510E_TDR_FLT_SLOPE_1, 0xa));
+ if (ret)
+ return ret;
+
+ ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, DP83TD510E_UNKN_030F,
+ DP83TD510E_030F_VAL);
+ if (ret)
+ return ret;
+
+ ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, DP83TD510E_TDR_CFG3,
+ FIELD_PREP(DP83TD510E_TDR_TX_DURATION_US, 16000));
+ if (ret)
+ return ret;
+
+ return phy_write_mmd(phydev, MDIO_MMD_VEND2, DP83TD510E_UNKN_0310,
+ DP83TD510E_0310_VAL);
+}
+
+static int dp83td510_cable_test_start(struct phy_device *phydev)
+{
+ int ret;
+
+ ret = dp83td510_tdr_init(phydev);
+ if (ret)
+ return ret;
+
+ return phy_set_bits_mmd(phydev, MDIO_MMD_VEND2, DP83TD510E_TDR_CFG,
+ DP83TD510E_TDR_START);
+}
+
+static int dp83td510_cable_test_get_status(struct phy_device *phydev,
+ bool *finished)
+{
+ int ret, stat;
+
+ *finished = false;
+
+ ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, DP83TD510E_TDR_CFG);
+ if (ret < 0)
+ return ret;
+
+ if (!(ret & DP83TD510E_TDR_DONE))
+ return 0;
+
+ if (!(ret & DP83TD510E_TDR_FAIL)) {
+ int location;
+
+ ret = phy_read_mmd(phydev, MDIO_MMD_VEND2,
+ DP83TD510E_TDR_FAULT_STAT);
+ if (ret < 0)
+ return ret;
+
+ if (ret & DP83TD510E_TDR_PEAK_DETECT) {
+ if (ret & DP83TD510E_TDR_PEAK_SIGN)
+ stat = ETHTOOL_A_CABLE_RESULT_CODE_OPEN;
+ else
+ stat = ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT;
+
+ location = FIELD_GET(DP83TD510E_TDR_PEAK_LOCATION,
+ ret) * 100;
+ ethnl_cable_test_fault_length(phydev,
+ ETHTOOL_A_CABLE_PAIR_A,
+ location);
+ } else {
+ stat = ETHTOOL_A_CABLE_RESULT_CODE_OK;
+ }
+ } else {
+ /* Most probably we have active link partner */
+ stat = ETHTOOL_A_CABLE_RESULT_CODE_UNSPEC;
+ }
+
+ *finished = true;
+
+ ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_A, stat);
+
+ /* Reset state machine, otherwise at least other TDR attempts may
+ * provide not reliable results.
+ */
+ return phy_set_bits(phydev, MII_BMCR, BMCR_RESET);
+}
+
static int dp83td510_get_features(struct phy_device *phydev)
{
/* This PHY can't respond on MDIO bus if no RMII clock is enabled.
@@ -241,6 +399,7 @@ static struct phy_driver dp83td510_driver[] = {
PHY_ID_MATCH_MODEL(DP83TD510E_PHY_ID),
.name = "TI DP83TD510E",
+ .flags = PHY_POLL_CABLE_TEST,
.config_aneg = dp83td510_config_aneg,
.read_status = dp83td510_read_status,
.get_features = dp83td510_get_features,
@@ -248,6 +407,8 @@ static struct phy_driver dp83td510_driver[] = {
.handle_interrupt = dp83td510_handle_interrupt,
.get_sqi = dp83td510_get_sqi,
.get_sqi_max = dp83td510_get_sqi_max,
+ .cable_test_start = dp83td510_cable_test_start,
+ .cable_test_get_status = dp83td510_cable_test_get_status,
.suspend = genphy_suspend,
.resume = genphy_resume,
--
2.30.2
Powered by blists - more mailing lists