| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <773e57f47ecfe98d2a89fb0611696a754c55505f.camel@suse.com>
Date: Wed, 8 Jun 2022 17:13:51 +0000
From: Martin Wilck <martin.wilck@...e.com>
To: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"brian@...estorage.com" <brian@...estorage.com>
CC: "krishna.kant@...estorage.com" <krishna.kant@...estorage.com>,
"sconnor@...estorage.com" <sconnor@...estorage.com>,
"hch@...radead.org" <hch@...radead.org>,
"hare@...e.de" <hare@...e.de>, "mwilck@...e.de" <mwilck@...e.de>
Subject: Re: [PATCH] scsi_lib: Don't fail the path in ALUA transition state
On Tue, 2022-06-07 at 12:58 -0700, Brian Bunker wrote:
> The error path for the SCSI check condition of not ready, target in
> ALUA state transition, will result in the failure of that path after
> the retries are exhausted. In most cases that is well ahead of the
> transition timeout established in the SCSI ALUA device handler.
>
> Instead, reprep the command and re-add it to the queue after a 1
> second
> delay. This will allow the handler to take care of the timeout and
> only fail the path in the transition state if the target has exceeded
> the transition timeout (default 60 seconds).
>
> Acked-by: Krishna Kant <krishna.kant@...estorage.com>
> Acked-by: Seamus Connor <sconnor@...estorage.com>
> Signed-off-by: Brian Bunker <brian@...estorage.com>
Reviewed-by: Martin Wilck <mwilck@...e.com>
> ---
> drivers/scsi/scsi_lib.c | 44 +++++++++++++++++++++++----------------
> --
> 1 file changed, 25 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
> index 6ffc9e4258a8..1afb267ff9a2 100644
> --- a/drivers/scsi/scsi_lib.c
> +++ b/drivers/scsi/scsi_lib.c
> @@ -118,7 +118,7 @@ scsi_set_blocked(struct scsi_cmnd *cmd, int
> reason)
> }
> }
>
> -static void scsi_mq_requeue_cmd(struct scsi_cmnd *cmd)
> +static void scsi_mq_requeue_cmd(struct scsi_cmnd *cmd, unsigned long
> msecs)
> {
> struct request *rq = scsi_cmd_to_rq(cmd);
>
> @@ -128,7 +128,12 @@ static void scsi_mq_requeue_cmd(struct scsi_cmnd
> *cmd)
> } else {
> WARN_ON_ONCE(true);
> }
> - blk_mq_requeue_request(rq, true);
> +
> + if (msecs) {
> + blk_mq_requeue_request(rq, false);
> + blk_mq_delay_kick_requeue_list(rq->q, msecs);
> + } else
> + blk_mq_requeue_request(rq, true);
> }
>
> /**
> @@ -658,14 +663,6 @@ static unsigned int scsi_rq_err_bytes(const
> struct request *rq)
> return bytes;
> }
>
> -/* Helper for scsi_io_completion() when "reprep" action required. */
> -static void scsi_io_completion_reprep(struct scsi_cmnd *cmd,
> - struct request_queue *q)
> -{
> - /* A new command will be prepared and issued. */
> - scsi_mq_requeue_cmd(cmd);
> -}
> -
> static bool scsi_cmd_runtime_exceeced(struct scsi_cmnd *cmd)
> {
> struct request *req = scsi_cmd_to_rq(cmd);
> @@ -683,14 +680,21 @@ static bool scsi_cmd_runtime_exceeced(struct
> scsi_cmnd *cmd)
> return false;
> }
>
> +/*
> + * When ALUA transition state is returned, reprep the cmd to
> + * use the ALUA handlers transition timeout. Delay the reprep
> + * 1 sec to avoid aggressive retries of the target in that
> + * state.
> + */
> +#define ALUA_TRANSITION_REPREP_DELAY 1000
> +
> /* Helper for scsi_io_completion() when special action required. */
> static void scsi_io_completion_action(struct scsi_cmnd *cmd, int
> result)
> {
> - struct request_queue *q = cmd->device->request_queue;
> struct request *req = scsi_cmd_to_rq(cmd);
> int level = 0;
> - enum {ACTION_FAIL, ACTION_REPREP, ACTION_RETRY,
> - ACTION_DELAYED_RETRY} action;
> + enum {ACTION_FAIL, ACTION_REPREP, ACTION_DELAYED_REPREP,
> + ACTION_RETRY, ACTION_DELAYED_RETRY} action;
> struct scsi_sense_hdr sshdr;
> bool sense_valid;
> bool sense_current = true; /* false implies "deferred
> sense" */
> @@ -779,8 +783,8 @@ static void scsi_io_completion_action(struct
> scsi_cmnd *cmd, int result)
> action =
> ACTION_DELAYED_RETRY;
> break;
> case 0x0a: /* ALUA state transition
> */
> - blk_stat = BLK_STS_TRANSPORT;
> - fallthrough;
> + action =
> ACTION_DELAYED_REPREP;
> + break;
> default:
> action = ACTION_FAIL;
> break;
> @@ -839,7 +843,10 @@ static void scsi_io_completion_action(struct
> scsi_cmnd *cmd, int result)
> return;
> fallthrough;
> case ACTION_REPREP:
> - scsi_io_completion_reprep(cmd, q);
> + scsi_mq_requeue_cmd(cmd, 0);
> + break;
> + case ACTION_DELAYED_REPREP:
> + scsi_mq_requeue_cmd(cmd,
> ALUA_TRANSITION_REPREP_DELAY);
> break;
> case ACTION_RETRY:
> /* Retry the same command immediately */
> @@ -933,7 +940,7 @@ static int scsi_io_completion_nz_result(struct
> scsi_cmnd *cmd, int result,
> * command block will be released and the queue function will be
> goosed. If we
> * are not done then we have to figure out what to do next:
> *
> - * a) We can call scsi_io_completion_reprep(). The request will
> be
> + * a) We can call scsi_mq_requeue_cmd(). The request will be
> * unprepared and put back on the queue. Then a new command
> will
> * be created for it. This should be used if we made forward
> * progress, or if we want to switch from READ(10) to READ(6)
> for
> @@ -949,7 +956,6 @@ static int scsi_io_completion_nz_result(struct
> scsi_cmnd *cmd, int result,
> void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int
> good_bytes)
> {
> int result = cmd->result;
> - struct request_queue *q = cmd->device->request_queue;
> struct request *req = scsi_cmd_to_rq(cmd);
> blk_status_t blk_stat = BLK_STS_OK;
>
> @@ -986,7 +992,7 @@ void scsi_io_completion(struct scsi_cmnd *cmd,
> unsigned int good_bytes)
> * request just queue the command up again.
> */
> if (likely(result == 0))
> - scsi_io_completion_reprep(cmd, q);
> + scsi_mq_requeue_cmd(cmd, 0);
> else
> scsi_io_completion_action(cmd, result);
> }
Powered by blists - more mailing lists