| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAF6AEGvgd7AbGG9szgAW1hXPrhfY78Vdh2s8a6Cei1gpScDQNw@mail.gmail.com>
Date: Wed, 8 Jun 2022 13:47:07 -0700
From: Rob Clark <robdclark@...il.com>
To: Akhil P Oommen <quic_akhilpo@...cinc.com>
Cc: dri-devel <dri-devel@...ts.freedesktop.org>,
linux-arm-msm <linux-arm-msm@...r.kernel.org>,
freedreno <freedreno@...ts.freedesktop.org>,
Rob Clark <robdclark@...omium.org>,
Sean Paul <sean@...rly.run>, David Airlie <airlied@...ux.ie>,
Daniel Vetter <daniel@...ll.ch>,
open list <linux-kernel@...r.kernel.org>
Subject: Re: [Freedreno] [PATCH] drm/msm: Switch ordering of runpm put vs devfreq_idle
On Wed, Jun 8, 2022 at 12:36 PM Akhil P Oommen <quic_akhilpo@...cinc.com> wrote:
>
> On 6/8/2022 3:00 AM, Rob Clark wrote:
> > On Tue, Sep 28, 2021 at 7:52 AM Akhil P Oommen <akhilpo@...eaurora.org> wrote:
> >> On 9/27/2021 8:59 PM, Rob Clark wrote:
> >>> From: Rob Clark <robdclark@...omium.org>
> >>>
> >>> I've seen a few crashes like:
> >>>
> >>> Internal error: synchronous external abort: 96000010 [#1] PREEMPT SMP
> >>> Modules linked in: snd_seq_dummy snd_seq snd_seq_device bridge stp llc tun nf_nat_tftp nf_conntrack_tftp nf_nat_ftp nf_conntrack_ftp esp6 ah6 ip6t_REJECT ip6t_ipv6header vhost_vsock vhost vmw_vsock_virtio_transport_common vsock rfcomm algif_hash algif_skcipher af_alg uinput veth xt_cgroup xt_MASQUERADE venus_enc venus_dec videobuf2_dma_contig qcom_spmi_adc5 qcom_spmi_adc_tm5 hci_uart qcom_vadc_common cros_ec_typec qcom_spmi_temp_alarm typec btqca snd_soc_rt5682_i2c snd_soc_rt5682 snd_soc_sc7180 bluetooth snd_soc_qcom_common snd_soc_rl6231 ecdh_generic ecc venus_core v4l2_mem2mem snd_soc_lpass_sc7180 snd_soc_lpass_hdmi snd_soc_lpass_cpu snd_soc_lpass_platform snd_soc_max98357a ip6table_nat fuse iio_trig_sysfs cros_ec_lid_angle cros_ec_sensors cros_ec_sensors_core industrialio_triggered_buffer kfifo_buf cros_ec_sensorhub lzo_rle ath10k_snoc lzo_compress ath10k_core ath zram mac80211 cfg80211 ax88179_178a usbnet mii uvcvideo videobuf2_vmalloc joydev
> >>> CPU: 3 PID: 212 Comm: A618-worker Tainted: G W 5.4.139-16300-g88d8e1285982 #1
> >>> Hardware name: Google Pompom (rev1) with LTE (DT)
> >>> pstate: 60c00009 (nZCv daif +PAN +UAO)
> >>> pc : a6xx_gmu_set_oob+0x114/0x200
> >>> lr : a6xx_gmu_set_oob+0x10c/0x200
> >>> sp : ffffffc011b7bc20
> >>> x29: ffffffc011b7bc20 x28: ffffffdad27c5000
> >>> x27: 0000000000000001 x26: ffffffdad1521044
> >>> x25: ffffffbef7498338 x24: 0000000000000018
> >>> x23: 0000000000000002 x22: 0000000000014648
> >>> x21: 0000033732fe638b x20: 0000000080000000
> >>> x19: ffffffbef7433bc8 x18: 0000000040000000
> >>> x17: 000000243508d982 x16: 000000000000b67e
> >>> x15: 00000000000090d4 x14: 0000000000000024
> >>> x13: 0000000000000024 x12: 0000000000017521
> >>> x11: 0000000000000b48 x10: 0000000000326a48
> >>> x9 : 1a130d33f6371600 x8 : ffffffc011e54648
> >>> x7 : 614948e00005003c x6 : ffffffbe3cd17e60
> >>> x5 : 0000000000000040 x4 : 0000000000000004
> >>> x3 : 0000000000000000 x2 : ffffffbef7488000
> >>> x1 : ffffffbef7488000 x0 : 0000000000000000
> >>> Call trace:
> >>> a6xx_gmu_set_oob+0x114/0x200
> >>> a6xx_gmu_set_freq+0xe0/0x1fc
> >>> msm_devfreq_target+0x80/0x13c
> >>> msm_devfreq_idle+0x54/0x94
> >>> retire_submit+0x170/0x254
> >>> retire_submits+0xa4/0xdc
> >>> retire_worker+0x1c/0x28
> >>> kthread_worker_fn+0xf4/0x1bc
> >>> kthread+0x140/0x158
> >>> ret_from_fork+0x10/0x18
> >>> Code: 52800c81 9415bbe5 f9400a68 8b160108 (b9400108)
> >>> ---[ end trace 16b871df2482cd61 ]---
> >>> Kernel panic - not syncing: Fatal exception
> >>> SMP: stopping secondary CPUs
> >>> Kernel Offset: 0x1ac1400000 from 0xffffffc010000000
> >>> PHYS_OFFSET: 0xffffffc280000000
> >>> CPU features: 0x88102e,2a80aa38
> >>> Memory Limit: none
> >>>
> >>> Which smells a lot like touching hw after power collapse. I'm not
> >>> *entirely* sure how it could have taken 66ms (the autosuspend delay)
> >>> before we get to a6xx_gmu_set_oob(), but to be safe we should move
> >>> the pm_runtime_put_autosuspend() after msm_devfreq_idle().
> >> https://elixir.bootlin.com/linux/v5.15-rc1/source/drivers/gpu/drm/msm/adreno/a6xx_gmu.c#L132
> >> We have this check in the gmu freq set path which should avoid this
> >> scenario. I might be a bit pedantic here, but I feel that the original
> >> code is more accurate. We should immediately mark last busy and put
> >> runtime_pm refcount.
> > So, I've been doing some experiments, changing the _put_autosuspend()
> > to _put_sync(), in the course of tracking down some remaining "GMU
> > OOB" timeout type issues and related badness, and discovered things
> > very quickly die with SError splats like below. Possibly the issue is
> > that runpm has some race conditions, but I'm not sure we can trust
> > pm_runtime_get_if_in_use() quite as much as one would like..
> >
> > -----------
> > [ 33.225332] CPU: 0 PID: 216 Comm: A618-worker Tainted: G W
> > 5.4.196 #7
> > [ 33.225337] Hardware name: Google Wormdingler rev1+ INX panel board (DT)
> > [ 33.225343] pstate: 20c00009 (nzCv daif +PAN +UAO)
> > [ 33.225353] pc : msm_readl+0x14/0x34
> > [ 33.225361] lr : a6xx_gpu_busy+0x40/0x80
> > [ 33.225365] sp : ffffffc011b93ad0
> > [ 33.225371] x29: ffffffc011b93ad0 x28: ffffffe77cba3000
> > [ 33.225377] x27: 0000000000000001 x26: ffffffe77bb4c4ac
> > [ 33.225384] x25: ffffffa2f227dfa0 x24: ffffffa2f22aab28
> > [ 33.225390] x23: 0000000000000000 x22: ffffffa2f22bf020
> > [ 33.225397] x21: ffffffa2f22bf000 x20: ffffffc011b93b10
> > [ 33.225404] x19: ffffffc011bd4110 x18: 000000000000000e
> > [ 33.225410] x17: 0000000000000004 x16: 000000000000000c
> > [ 33.225416] x15: 000001be3a969450 x14: 0000000000000400
> > [ 33.225423] x13: 00000000000101d6 x12: 0000000034155555
> > [ 33.225429] x11: 0000000000000001 x10: 0000000000000000
> > [ 33.225436] x9 : 0000000100000000 x8 : ffffffc011bd4000
> > [ 33.225443] x7 : 0000000000000000 x6 : 0000000000000007
> > [ 33.225450] x5 : ffffffc01d8b38f0 x4 : 0000000000000000
> > [ 33.225457] x3 : 00000000ffffffff x2 : 0000000000000002
> > [ 33.225463] x1 : 0000000000000000 x0 : ffffffc011bd4110
> > [ 33.225471] Call trace:
> > [ 33.225478] msm_readl+0x14/0x34
> > [ 33.225484] a6xx_gpu_busy+0x40/0x80
> > [ 33.225490] msm_devfreq_get_dev_status+0x70/0x1d0
> > [ 33.225500] devfreq_simple_ondemand_func+0x34/0x100
> > [ 33.225510] update_devfreq+0x50/0xe8
> > [ 33.225517] qos_notifier_call+0x2c/0x64
> > [ 33.225523] qos_max_notifier_call+0x1c/0x2c
> > [ 33.225532] notifier_call_chain+0x58/0x98
> > [ 33.225539] __blocking_notifier_call_chain+0x74/0x84
> > [ 33.225545] blocking_notifier_call_chain+0x38/0x48
> > [ 33.225554] pm_qos_update_target+0xf8/0x19c
> > [ 33.225560] freq_qos_apply+0x54/0x6c
> > [ 33.225566] apply_constraint+0x60/0x104
> > [ 33.225572] __dev_pm_qos_update_request+0xb4/0x184
> > [ 33.225578] dev_pm_qos_update_request+0x38/0x58
> > [ 33.225584] msm_devfreq_idle_work+0x34/0x40
> > [ 33.225591] kthread_worker_fn+0x144/0x1c8
> > [ 33.225597] kthread+0x140/0x284
> > [ 33.225604] ret_from_fork+0x10/0x18
> > [ 33.225617] Code: f9000bf3 910003fd aa0003f3 d503201f (b9400260)
> > [ 33.225623] ---[ end trace f6309767a42d0831 ]---
> > [ 33.236185] SMP: stopping secondary CPUs
> > [ 33.236186] Kernel Offset: 0x276b600000 from 0xffffffc010000000
> > [ 33.236186] PHYS_OFFSET: 0xffffffdf80000000
> > [ 33.236187] CPU features: 0x088102e,2a80aa38
> > -----------
> Any chance we are racing with system suspend here? Because, when
> "dev->power.disable_depth > 0", pm_runtime_get_if_in_use() returns
> -EINVAL. Then I guess we should look for a positive return value from
> pm_runtime_get_if_in_use() before proceeding.
I think that is possible.. although I can still still SErrors in
a6xx_gpu_busy() with:
----------
diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gmu.c
b/drivers/gpu/drm/msm/adreno/a6xx_gmu.c
index 1ec90a9ca56c..61e1e33f355a 100644
--- a/drivers/gpu/drm/msm/adreno/a6xx_gmu.c
+++ b/drivers/gpu/drm/msm/adreno/a6xx_gmu.c
@@ -129,7 +129,7 @@ void a6xx_gmu_set_freq(struct msm_gpu *gpu, struct
dev_pm_opp *opp)
* This can get called from devfreq while the hardware is idle. Don't
* bring up the power if it isn't already active
*/
- if (pm_runtime_get_if_in_use(gmu->dev) == 0)
+ if (pm_runtime_get_if_in_use(gmu->dev) <= 0)
return;
if (!gmu->legacy) {
diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
index 95a6c3361a1e..b17a95f7b85c 100644
--- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
+++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
@@ -1456,7 +1456,7 @@ static u64 a6xx_gpu_busy(struct msm_gpu *gpu,
unsigned long *out_sample_rate)
*out_sample_rate = 19200000;
/* Only read the gpu busy if the hardware is already active */
- if (pm_runtime_get_if_in_use(a6xx_gpu->gmu.dev) == 0)
+ if (pm_runtime_get_if_in_use(a6xx_gpu->gmu.dev) <= 0)
return 0;
busy_cycles = gmu_read64(&a6xx_gpu->gmu,
----------
So I don't think this completely explains it
I am starting to think it might not be a bad idea to drain the gpu's
kthread working in the suspend path
BR,
-R
>
> -Akhil.
> >> -Akhil.
> >>
> >>> Fixes: 9bc95570175a ("drm/msm: Devfreq tuning")
> >>> Signed-off-by: Rob Clark <robdclark@...omium.org>
> >>> ---
> >>> drivers/gpu/drm/msm/msm_gpu.c | 6 +++---
> >>> 1 file changed, 3 insertions(+), 3 deletions(-)
> >>>
> >>> diff --git a/drivers/gpu/drm/msm/msm_gpu.c b/drivers/gpu/drm/msm/msm_gpu.c
> >>> index d1a16642ecd5..2b2bbe7499e6 100644
> >>> --- a/drivers/gpu/drm/msm/msm_gpu.c
> >>> +++ b/drivers/gpu/drm/msm/msm_gpu.c
> >>> @@ -667,9 +667,6 @@ static void retire_submit(struct msm_gpu *gpu, struct msm_ringbuffer *ring,
> >>>
> >>> msm_submit_retire(submit);
> >>>
> >>> - pm_runtime_mark_last_busy(&gpu->pdev->dev);
> >>> - pm_runtime_put_autosuspend(&gpu->pdev->dev);
> >>> -
> >>> spin_lock_irqsave(&ring->submit_lock, flags);
> >>> list_del(&submit->node);
> >>> spin_unlock_irqrestore(&ring->submit_lock, flags);
> >>> @@ -683,6 +680,9 @@ static void retire_submit(struct msm_gpu *gpu, struct msm_ringbuffer *ring,
> >>> mutex_unlock(&gpu->active_lock);
> >>>
> >>> msm_gem_submit_put(submit);
> >>> +
> >>> + pm_runtime_mark_last_busy(&gpu->pdev->dev);
> >>> + pm_runtime_put_autosuspend(&gpu->pdev->dev);
> >>> }
> >>>
> >>> static void retire_submits(struct msm_gpu *gpu)
> >>>
>
Powered by blists - more mailing lists