[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <6ca11af0-9c13-4e41-07fd-7fe90f202667@foss.st.com>
Date: Tue, 21 Jun 2022 15:40:48 +0200
From: Pierre Yves MORDRET <pierre-yves.mordret@...s.st.com>
To: Alain Volmat <alain.volmat@...s.st.com>, <wsa@...nel.org>,
<robh+dt@...nel.org>
CC: <mark.rutland@....com>, <mcoquelin.stm32@...il.com>,
<alexandre.torgue@...s.st.com>, <linux-i2c@...r.kernel.org>,
<devicetree@...r.kernel.org>,
<linux-stm32@...md-mailman.stormreply.com>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <fabrice.gasnier@...s.st.com>,
<amelie.delaunay@...s.st.com>
Subject: Re: [PATCH 4/4] i2c: stm32: add support for the STM32MP13 soc
Hi All
Look good to me.
Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@...s.st.com>
Regards
On 6/20/22 12:54, Alain Volmat wrote:
> Add a new compatible for the stm32mp13. Fast Mode Plus control
> register address differ from the one for STM32MP15.
>
> Signed-off-by: Alain Volmat <alain.volmat@...s.st.com>
> ---
> drivers/i2c/busses/i2c-stm32f7.c | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c
> index b29d8e476342..9946b330ddce 100644
> --- a/drivers/i2c/busses/i2c-stm32f7.c
> +++ b/drivers/i2c/busses/i2c-stm32f7.c
> @@ -410,6 +410,12 @@ static const struct stm32f7_i2c_setup stm32mp15_setup = {
> .fmp_clr_offset = 0x40,
> };
>
> +static const struct stm32f7_i2c_setup stm32mp13_setup = {
> + .rise_time = STM32F7_I2C_RISE_TIME_DEFAULT,
> + .fall_time = STM32F7_I2C_FALL_TIME_DEFAULT,
> + .fmp_clr_offset = 0x4,
> +};
> +
> static inline void stm32f7_i2c_set_bits(void __iomem *reg, u32 mask)
> {
> writel_relaxed(readl_relaxed(reg) | mask, reg);
> @@ -2469,6 +2475,7 @@ static const struct dev_pm_ops stm32f7_i2c_pm_ops = {
> static const struct of_device_id stm32f7_i2c_match[] = {
> { .compatible = "st,stm32f7-i2c", .data = &stm32f7_setup},
> { .compatible = "st,stm32mp15-i2c", .data = &stm32mp15_setup},
> + { .compatible = "st,stm32mp13-i2c", .data = &stm32mp13_setup},
> {},
> };
> MODULE_DEVICE_TABLE(of, stm32f7_i2c_match);
--
--
~ Py MORDRET
--
Powered by blists - more mailing lists