linux-kernel - [PATCH 4/8] serial: core: sanitize RS485 delays read from device tree

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20220622154659.8710-5-LinoSanfilippo@gmx.de>
Date:   Wed, 22 Jun 2022 17:46:55 +0200
From:   Lino Sanfilippo <LinoSanfilippo@....de>
To:     gregkh@...uxfoundation.org, jirislaby@...nel.org
Cc:     ilpo.jarvinen@...ux.intel.com, robh+dt@...nel.org,
        krzysztof.kozlowski+dt@...aro.org,
        andriy.shevchenko@...ux.intel.com, vz@...ia.com,
        linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
        linux-serial@...r.kernel.org, linux-kernel@...r.kernel.org,
        lukas@...ner.de, p.rosenberger@...bus.com,
        Lino Sanfilippo <l.sanfilippo@...bus.com>
Subject: [PATCH 4/8] serial: core: sanitize RS485 delays read from device tree

From: Lino Sanfilippo <l.sanfilippo@...bus.com>

When setting the RS485 configuration from userspace via TIOCSRS485 the
delays are clamped to 100ms. Make this consistent with the values passed
in by means of device tree parameters.

Signed-off-by: Lino Sanfilippo <l.sanfilippo@...bus.com>
---
 drivers/tty/serial/serial_core.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index fa6acadd7d0c..2e9f90e73e62 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -3382,6 +3382,8 @@ int uart_get_rs485_mode(struct uart_port *port)
 		rs485conf->delay_rts_after_send = 0;
 	}
 
+	uart_sanitize_serial_rs485_delays(port, rs485conf);
+
 	/*
 	 * Clear full-duplex and enabled flags, set RTS polarity to active high
 	 * to get to a defined state with the following properties:
-- 
2.36.1