linux-kernel - [PATCH 6/8] serial: 8250_dwlib: remove redundant sanity check for RS485 flags

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20220622154659.8710-7-LinoSanfilippo@gmx.de>
Date:   Wed, 22 Jun 2022 17:46:57 +0200
From:   Lino Sanfilippo <LinoSanfilippo@....de>
To:     gregkh@...uxfoundation.org, jirislaby@...nel.org
Cc:     ilpo.jarvinen@...ux.intel.com, robh+dt@...nel.org,
        krzysztof.kozlowski+dt@...aro.org,
        andriy.shevchenko@...ux.intel.com, vz@...ia.com,
        linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
        linux-serial@...r.kernel.org, linux-kernel@...r.kernel.org,
        lukas@...ner.de, p.rosenberger@...bus.com,
        Lino Sanfilippo <l.sanfilippo@...bus.com>
Subject: [PATCH 6/8] serial: 8250_dwlib: remove redundant sanity check for RS485 flags

From: Lino Sanfilippo <l.sanfilippo@...bus.com>

Before the drivers rs485_config() function is called the serial core
already ensures that only one of both options RTS on send or RTS after send
is set. So remove the concerning sanity check in the driver function to
avoid redundancy.

Signed-off-by: Lino Sanfilippo <l.sanfilippo@...bus.com>
---
 drivers/tty/serial/8250/8250_dwlib.c | 10 ++--------
 1 file changed, 2 insertions(+), 8 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_dwlib.c b/drivers/tty/serial/8250/8250_dwlib.c
index c83e7eaf3877..bed2bd6b7a01 100644
--- a/drivers/tty/serial/8250/8250_dwlib.c
+++ b/drivers/tty/serial/8250/8250_dwlib.c
@@ -95,16 +95,10 @@ static int dw8250_rs485_config(struct uart_port *p, struct serial_rs485 *rs485)
 	if (rs485->flags & SER_RS485_ENABLED) {
 		tcr |= DW_UART_TCR_RS485_EN;
 
-		if (rs485->flags & SER_RS485_RX_DURING_TX) {
+		if (rs485->flags & SER_RS485_RX_DURING_TX)
 			tcr |= DW_UART_TCR_XFER_MODE_DE_DURING_RE;
-		} else {
-			/* HW does not support same DE level for tx and rx */
-			if (!(rs485->flags & SER_RS485_RTS_ON_SEND) ==
-			    !(rs485->flags & SER_RS485_RTS_AFTER_SEND))
-				return -EINVAL;
-
+		else
 			tcr |= DW_UART_TCR_XFER_MODE_DE_OR_RE;
-		}
 		dw8250_writel_ext(p, DW_UART_DE_EN, 1);
 		dw8250_writel_ext(p, DW_UART_RE_EN, 1);
 	} else {
-- 
2.36.1