| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 22 Jun 2022 12:09:59 +0200
From: Hans de Goede <hdegoede@...hat.com>
To: Maximilian Luz <luzmaximilian@...il.com>
Cc: Mark Gross <markgross@...nel.org>,
platform-driver-x86@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH] platform/surface: aggregator: Reserve more event- and
target-categories
Hi,
On 6/14/22 21:41, Maximilian Luz wrote:
> With the introduction of the Surface Laptop Studio, more event- and
> target categories have been added. Therefore, increase the number of
> reserved events and extend the enum of know target categories to
> accommodate this.
>
> Signed-off-by: Maximilian Luz <luzmaximilian@...il.com>
Thank you for your patch, I've applied this patch to my review-hans
branch:
https://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86.git/log/?h=review-hans
Note it will show up in my review-hans branch once I've pushed my
local branch there, which might take a while.
Once I've run some tests on this branch the patches there will be
added to the platform-drivers-x86/for-next branch and eventually
will be included in the pdx86 pull-request to Linus for the next
merge-window.
Regards,
Hans
> ---
> drivers/platform/surface/aggregator/trace.h | 80 +++++++++++--------
> include/linux/surface_aggregator/serial_hub.h | 75 +++++++++--------
> 2 files changed, 85 insertions(+), 70 deletions(-)
>
> diff --git a/drivers/platform/surface/aggregator/trace.h b/drivers/platform/surface/aggregator/trace.h
> index de64cf169060..cc9e73fbc18e 100644
> --- a/drivers/platform/surface/aggregator/trace.h
> +++ b/drivers/platform/surface/aggregator/trace.h
> @@ -76,7 +76,7 @@ TRACE_DEFINE_ENUM(SSAM_SSH_TC_HID);
> TRACE_DEFINE_ENUM(SSAM_SSH_TC_TCH);
> TRACE_DEFINE_ENUM(SSAM_SSH_TC_BKL);
> TRACE_DEFINE_ENUM(SSAM_SSH_TC_TAM);
> -TRACE_DEFINE_ENUM(SSAM_SSH_TC_ACC);
> +TRACE_DEFINE_ENUM(SSAM_SSH_TC_ACC0);
> TRACE_DEFINE_ENUM(SSAM_SSH_TC_UFI);
> TRACE_DEFINE_ENUM(SSAM_SSH_TC_USC);
> TRACE_DEFINE_ENUM(SSAM_SSH_TC_PEN);
> @@ -85,6 +85,11 @@ TRACE_DEFINE_ENUM(SSAM_SSH_TC_AUD);
> TRACE_DEFINE_ENUM(SSAM_SSH_TC_SMC);
> TRACE_DEFINE_ENUM(SSAM_SSH_TC_KPD);
> TRACE_DEFINE_ENUM(SSAM_SSH_TC_REG);
> +TRACE_DEFINE_ENUM(SSAM_SSH_TC_SPT);
> +TRACE_DEFINE_ENUM(SSAM_SSH_TC_SYS);
> +TRACE_DEFINE_ENUM(SSAM_SSH_TC_ACC1);
> +TRACE_DEFINE_ENUM(SSAM_SSH_TC_SHB);
> +TRACE_DEFINE_ENUM(SSAM_SSH_TC_POS);
>
> #define SSAM_PTR_UID_LEN 9
> #define SSAM_U8_FIELD_NOT_APPLICABLE ((u16)-1)
> @@ -229,40 +234,45 @@ static inline u32 ssam_trace_get_request_tc(const struct ssh_packet *p)
>
> #define ssam_show_ssh_tc(rqid) \
> __print_symbolic(rqid, \
> - { SSAM_SSH_TC_NOT_APPLICABLE, "N/A" }, \
> - { SSAM_SSH_TC_SAM, "SAM" }, \
> - { SSAM_SSH_TC_BAT, "BAT" }, \
> - { SSAM_SSH_TC_TMP, "TMP" }, \
> - { SSAM_SSH_TC_PMC, "PMC" }, \
> - { SSAM_SSH_TC_FAN, "FAN" }, \
> - { SSAM_SSH_TC_PoM, "PoM" }, \
> - { SSAM_SSH_TC_DBG, "DBG" }, \
> - { SSAM_SSH_TC_KBD, "KBD" }, \
> - { SSAM_SSH_TC_FWU, "FWU" }, \
> - { SSAM_SSH_TC_UNI, "UNI" }, \
> - { SSAM_SSH_TC_LPC, "LPC" }, \
> - { SSAM_SSH_TC_TCL, "TCL" }, \
> - { SSAM_SSH_TC_SFL, "SFL" }, \
> - { SSAM_SSH_TC_KIP, "KIP" }, \
> - { SSAM_SSH_TC_EXT, "EXT" }, \
> - { SSAM_SSH_TC_BLD, "BLD" }, \
> - { SSAM_SSH_TC_BAS, "BAS" }, \
> - { SSAM_SSH_TC_SEN, "SEN" }, \
> - { SSAM_SSH_TC_SRQ, "SRQ" }, \
> - { SSAM_SSH_TC_MCU, "MCU" }, \
> - { SSAM_SSH_TC_HID, "HID" }, \
> - { SSAM_SSH_TC_TCH, "TCH" }, \
> - { SSAM_SSH_TC_BKL, "BKL" }, \
> - { SSAM_SSH_TC_TAM, "TAM" }, \
> - { SSAM_SSH_TC_ACC, "ACC" }, \
> - { SSAM_SSH_TC_UFI, "UFI" }, \
> - { SSAM_SSH_TC_USC, "USC" }, \
> - { SSAM_SSH_TC_PEN, "PEN" }, \
> - { SSAM_SSH_TC_VID, "VID" }, \
> - { SSAM_SSH_TC_AUD, "AUD" }, \
> - { SSAM_SSH_TC_SMC, "SMC" }, \
> - { SSAM_SSH_TC_KPD, "KPD" }, \
> - { SSAM_SSH_TC_REG, "REG" } \
> + { SSAM_SSH_TC_NOT_APPLICABLE, "N/A" }, \
> + { SSAM_SSH_TC_SAM, "SAM" }, \
> + { SSAM_SSH_TC_BAT, "BAT" }, \
> + { SSAM_SSH_TC_TMP, "TMP" }, \
> + { SSAM_SSH_TC_PMC, "PMC" }, \
> + { SSAM_SSH_TC_FAN, "FAN" }, \
> + { SSAM_SSH_TC_PoM, "PoM" }, \
> + { SSAM_SSH_TC_DBG, "DBG" }, \
> + { SSAM_SSH_TC_KBD, "KBD" }, \
> + { SSAM_SSH_TC_FWU, "FWU" }, \
> + { SSAM_SSH_TC_UNI, "UNI" }, \
> + { SSAM_SSH_TC_LPC, "LPC" }, \
> + { SSAM_SSH_TC_TCL, "TCL" }, \
> + { SSAM_SSH_TC_SFL, "SFL" }, \
> + { SSAM_SSH_TC_KIP, "KIP" }, \
> + { SSAM_SSH_TC_EXT, "EXT" }, \
> + { SSAM_SSH_TC_BLD, "BLD" }, \
> + { SSAM_SSH_TC_BAS, "BAS" }, \
> + { SSAM_SSH_TC_SEN, "SEN" }, \
> + { SSAM_SSH_TC_SRQ, "SRQ" }, \
> + { SSAM_SSH_TC_MCU, "MCU" }, \
> + { SSAM_SSH_TC_HID, "HID" }, \
> + { SSAM_SSH_TC_TCH, "TCH" }, \
> + { SSAM_SSH_TC_BKL, "BKL" }, \
> + { SSAM_SSH_TC_TAM, "TAM" }, \
> + { SSAM_SSH_TC_ACC0, "ACC0" }, \
> + { SSAM_SSH_TC_UFI, "UFI" }, \
> + { SSAM_SSH_TC_USC, "USC" }, \
> + { SSAM_SSH_TC_PEN, "PEN" }, \
> + { SSAM_SSH_TC_VID, "VID" }, \
> + { SSAM_SSH_TC_AUD, "AUD" }, \
> + { SSAM_SSH_TC_SMC, "SMC" }, \
> + { SSAM_SSH_TC_KPD, "KPD" }, \
> + { SSAM_SSH_TC_REG, "REG" }, \
> + { SSAM_SSH_TC_SPT, "SPT" }, \
> + { SSAM_SSH_TC_SYS, "SYS" }, \
> + { SSAM_SSH_TC_ACC1, "ACC1" }, \
> + { SSAM_SSH_TC_SHB, "SMB" }, \
> + { SSAM_SSH_TC_POS, "POS" } \
> )
>
> DECLARE_EVENT_CLASS(ssam_frame_class,
> diff --git a/include/linux/surface_aggregator/serial_hub.h b/include/linux/surface_aggregator/serial_hub.h
> index 26b95ec12733..45501b6e54e8 100644
> --- a/include/linux/surface_aggregator/serial_hub.h
> +++ b/include/linux/surface_aggregator/serial_hub.h
> @@ -201,7 +201,7 @@ static inline u16 ssh_crc(const u8 *buf, size_t len)
> * exception of zero, which is not an event ID. Thus, this is also the
> * absolute maximum number of event handlers that can be registered.
> */
> -#define SSH_NUM_EVENTS 34
> +#define SSH_NUM_EVENTS 38
>
> /*
> * SSH_NUM_TARGETS - The number of communication targets used in the protocol.
> @@ -292,40 +292,45 @@ struct ssam_span {
> * Windows driver.
> */
> enum ssam_ssh_tc {
> - /* Category 0x00 is invalid for EC use. */
> - SSAM_SSH_TC_SAM = 0x01, /* Generic system functionality, real-time clock. */
> - SSAM_SSH_TC_BAT = 0x02, /* Battery/power subsystem. */
> - SSAM_SSH_TC_TMP = 0x03, /* Thermal subsystem. */
> - SSAM_SSH_TC_PMC = 0x04,
> - SSAM_SSH_TC_FAN = 0x05,
> - SSAM_SSH_TC_PoM = 0x06,
> - SSAM_SSH_TC_DBG = 0x07,
> - SSAM_SSH_TC_KBD = 0x08, /* Legacy keyboard (Laptop 1/2). */
> - SSAM_SSH_TC_FWU = 0x09,
> - SSAM_SSH_TC_UNI = 0x0a,
> - SSAM_SSH_TC_LPC = 0x0b,
> - SSAM_SSH_TC_TCL = 0x0c,
> - SSAM_SSH_TC_SFL = 0x0d,
> - SSAM_SSH_TC_KIP = 0x0e, /* Manages detachable peripherals (Pro X/8 keyboard cover) */
> - SSAM_SSH_TC_EXT = 0x0f,
> - SSAM_SSH_TC_BLD = 0x10,
> - SSAM_SSH_TC_BAS = 0x11, /* Detachment system (Surface Book 2/3). */
> - SSAM_SSH_TC_SEN = 0x12,
> - SSAM_SSH_TC_SRQ = 0x13,
> - SSAM_SSH_TC_MCU = 0x14,
> - SSAM_SSH_TC_HID = 0x15, /* Generic HID input subsystem. */
> - SSAM_SSH_TC_TCH = 0x16,
> - SSAM_SSH_TC_BKL = 0x17,
> - SSAM_SSH_TC_TAM = 0x18,
> - SSAM_SSH_TC_ACC = 0x19,
> - SSAM_SSH_TC_UFI = 0x1a,
> - SSAM_SSH_TC_USC = 0x1b,
> - SSAM_SSH_TC_PEN = 0x1c,
> - SSAM_SSH_TC_VID = 0x1d,
> - SSAM_SSH_TC_AUD = 0x1e,
> - SSAM_SSH_TC_SMC = 0x1f,
> - SSAM_SSH_TC_KPD = 0x20,
> - SSAM_SSH_TC_REG = 0x21, /* Extended event registry. */
> + /* Category 0x00 is invalid for EC use. */
> + SSAM_SSH_TC_SAM = 0x01, /* Generic system functionality, real-time clock. */
> + SSAM_SSH_TC_BAT = 0x02, /* Battery/power subsystem. */
> + SSAM_SSH_TC_TMP = 0x03, /* Thermal subsystem. */
> + SSAM_SSH_TC_PMC = 0x04,
> + SSAM_SSH_TC_FAN = 0x05,
> + SSAM_SSH_TC_PoM = 0x06,
> + SSAM_SSH_TC_DBG = 0x07,
> + SSAM_SSH_TC_KBD = 0x08, /* Legacy keyboard (Laptop 1/2). */
> + SSAM_SSH_TC_FWU = 0x09,
> + SSAM_SSH_TC_UNI = 0x0a,
> + SSAM_SSH_TC_LPC = 0x0b,
> + SSAM_SSH_TC_TCL = 0x0c,
> + SSAM_SSH_TC_SFL = 0x0d,
> + SSAM_SSH_TC_KIP = 0x0e, /* Manages detachable peripherals (Pro X/8 keyboard cover) */
> + SSAM_SSH_TC_EXT = 0x0f,
> + SSAM_SSH_TC_BLD = 0x10,
> + SSAM_SSH_TC_BAS = 0x11, /* Detachment system (Surface Book 2/3). */
> + SSAM_SSH_TC_SEN = 0x12,
> + SSAM_SSH_TC_SRQ = 0x13,
> + SSAM_SSH_TC_MCU = 0x14,
> + SSAM_SSH_TC_HID = 0x15, /* Generic HID input subsystem. */
> + SSAM_SSH_TC_TCH = 0x16,
> + SSAM_SSH_TC_BKL = 0x17,
> + SSAM_SSH_TC_TAM = 0x18,
> + SSAM_SSH_TC_ACC0 = 0x19,
> + SSAM_SSH_TC_UFI = 0x1a,
> + SSAM_SSH_TC_USC = 0x1b,
> + SSAM_SSH_TC_PEN = 0x1c,
> + SSAM_SSH_TC_VID = 0x1d,
> + SSAM_SSH_TC_AUD = 0x1e,
> + SSAM_SSH_TC_SMC = 0x1f,
> + SSAM_SSH_TC_KPD = 0x20,
> + SSAM_SSH_TC_REG = 0x21, /* Extended event registry. */
> + SSAM_SSH_TC_SPT = 0x22,
> + SSAM_SSH_TC_SYS = 0x23,
> + SSAM_SSH_TC_ACC1 = 0x24,
> + SSAM_SSH_TC_SHB = 0x25,
> + SSAM_SSH_TC_POS = 0x26, /* For obtaining Laptop Studio screen position. */
> };
>
>
Powered by blists - more mailing lists