linux-kernel - [PATCH 1/4] dt-bindings: usb: typec: add bindings for stm32g0 controller

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20220624155413.399190-2-fabrice.gasnier@foss.st.com>
Date:   Fri, 24 Jun 2022 17:54:10 +0200
From:   Fabrice Gasnier <fabrice.gasnier@...s.st.com>
To:     <robh+dt@...nel.org>, <heikki.krogerus@...ux.intel.com>,
        <gregkh@...uxfoundation.org>
CC:     <krzysztof.kozlowski+dt@...aro.org>, <devicetree@...r.kernel.org>,
        <linux-usb@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <linux-stm32@...md-mailman.stormreply.com>,
        <amelie.delaunay@...s.st.com>, <alexandre.torgue@...s.st.com>,
        <fabrice.gasnier@...s.st.com>
Subject: [PATCH 1/4] dt-bindings: usb: typec: add bindings for stm32g0 controller

This patch adds DT schema documentation for the STM32G0 Type-C controller.
STM32G0 provides an integrated USB Type-C and power delivery interface.
It can be programmed with a firmware to handle UCSI protocol over I2C
interface. A GPIO is used as an interrupt line.
It may be used as a wakeup source, so use optional "wakeup-source" and
"power-domains" properties to support wakeup.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@...s.st.com>
---
 .../bindings/usb/st,typec-stm32g0.yaml        | 83 +++++++++++++++++++
 1 file changed, 83 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/st,typec-stm32g0.yaml

diff --git a/Documentation/devicetree/bindings/usb/st,typec-stm32g0.yaml b/Documentation/devicetree/bindings/usb/st,typec-stm32g0.yaml
new file mode 100644
index 0000000000000..b2729bd015a1a
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/st,typec-stm32g0.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/usb/st,typec-stm32g0.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: STMicroelectronics STM32G0 Type-C controller bindings
+
+description: |
+  The STM32G0 MCU can be programmed to control Type-C connector(s) through I2C
+  typically using the UCSI protocol over I2C, with a dedicated alert
+  (interrupt) pin.
+
+maintainers:
+  - Fabrice Gasnier <fabrice.gasnier@...s.st.com>
+
+properties:
+  compatible:
+    const: st,stm32g0-typec
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  connector:
+    type: object
+    allOf:
+      - $ref: ../connector/usb-connector.yaml#
+
+  firmware-name:
+    description: |
+      Should contain the name of the default firmware image
+      file located on the firmware search path
+
+  wakeup-source: true
+  power-domains: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c5 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      stm32g0@53 {
+        compatible = "st,stm32g0-typec";
+        reg = <0x53>;
+        /* Alert pin on GPIO PE12 */
+        interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+        interrupt-parent = <&gpioe>;
+
+        /* Example with one type-C connector */
+        connector {
+          compatible = "usb-c-connector";
+          label = "USB-C";
+
+          port {
+            con_usb_c_ep: endpoint {
+              remote-endpoint = <&usbotg_hs_ep>;
+            };
+          };
+        };
+      };
+    };
+
+    usbotg_hs {
+      usb-role-switch;
+      port {
+        usbotg_hs_ep: endpoint {
+          remote-endpoint = <&con_usb_c_ep>;
+        };
+      };
+    };
+...
-- 
2.25.1