[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20220624155413.399190-1-fabrice.gasnier@foss.st.com>
Date: Fri, 24 Jun 2022 17:54:09 +0200
From: Fabrice Gasnier <fabrice.gasnier@...s.st.com>
To: <robh+dt@...nel.org>, <heikki.krogerus@...ux.intel.com>,
<gregkh@...uxfoundation.org>
CC: <krzysztof.kozlowski+dt@...aro.org>, <devicetree@...r.kernel.org>,
<linux-usb@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-stm32@...md-mailman.stormreply.com>,
<amelie.delaunay@...s.st.com>, <alexandre.torgue@...s.st.com>,
<fabrice.gasnier@...s.st.com>
Subject: [PATCH 0/4] usb: typec: ucsi: add support for stm32g0
STM32G0 provides an integrated USB Type-C and power delivery interface [1].
It can be programmed with a firmware [2] to act as a PPM. Currently it
implements UCSI protocol over I2C interface. A GPIO is used as an interrupt
line.
This series adds a driver to support it, including:
- dt-bindings documentation
- optional STM32G0 firmware control and update, over a secondary I2C address
- power management
[1] https://wiki.st.com/stm32mcu/wiki/Introduction_to_USB_Power_Delivery_with_STM32
[2] https://github.com/STMicroelectronics/x-cube-ucsi
Fabrice Gasnier (4):
dt-bindings: usb: typec: add bindings for stm32g0 controller
usb: typec: ucsi: stm32g0: add support for stm32g0 i2c controller
usb: typec: ucsi: stm32g0: add bootloader support
usb: typec: ucsi: stm32g0: add support for power management
.../bindings/usb/st,typec-stm32g0.yaml | 83 ++
drivers/usb/typec/ucsi/Kconfig | 10 +
drivers/usb/typec/ucsi/Makefile | 1 +
drivers/usb/typec/ucsi/ucsi_stm32g0.c | 777 ++++++++++++++++++
4 files changed, 871 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/st,typec-stm32g0.yaml
create mode 100644 drivers/usb/typec/ucsi/ucsi_stm32g0.c
--
2.25.1
Powered by blists - more mailing lists