[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <877d5669mc.fsf@mpe.ellerman.id.au>
Date: Fri, 24 Jun 2022 13:08:59 +1000
From: Michael Ellerman <mpe@...erman.id.au>
To: Pali Rohár <pali@...nel.org>,
Rob Herring <robh+dt@...nel.org>
Cc: devicetree@...r.kernel.org, linuxppc-dev@...ts.ozlabs.org,
linux-kernel@...r.kernel.org, Marek Behun <marek.behun@....cz>,
Josef Schlehofer <josef.schlehofer@....cz>
Subject: Re: [PATCH] powerpc: dts: Add DTS file for CZ.NIC Turris 1.x routers
Pali Rohár <pali@...nel.org> writes:
> CZ.NIC Turris 1.0 and 1.1 are open source routers, they have dual-core
> PowerPC Freescale P2020 CPU and are based on Freescale P2020RDB-PC-A board.
> Hardware design is fully open source, all firmware and hardware design
> files are available at Turris project website:
>
> https://docs.turris.cz/hw/turris-1x/turris-1x/
> https://project.turris.cz/en/hardware.html
>
> Signed-off-by: Pali Rohár <pali@...nel.org>
> ---
> arch/powerpc/boot/dts/turris1x.dts | 470 +++++++++++++++++++++++++++++
> 1 file changed, 470 insertions(+)
> create mode 100644 arch/powerpc/boot/dts/turris1x.dts
The headers say you Cc'ed this to the devicetree list, but I don't see
it in the devicetree patchwork:
https://patchwork.ozlabs.org/project/devicetree-bindings/list/?state=*&q=turris&archive=both
Which means it hasn't been run through Rob's CI scripts.
Maybe try a resend?
cheers
Powered by blists - more mailing lists