[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <f51a6ccda0f7b4596406789fa73e1bdad85186bc.camel@pengutronix.de>
Date: Wed, 29 Jun 2022 18:28:52 +0200
From: Philipp Zabel <p.zabel@...gutronix.de>
To: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>,
Marc Zyngier <maz@...nel.org>,
Thomas Gleixner <tglx@...utronix.de>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Geert Uytterhoeven <geert+renesas@...der.be>,
Linus Walleij <linus.walleij@...aro.org>,
Bartosz Golaszewski <brgl@...ev.pl>,
linux-gpio@...r.kernel.org, linux-renesas-soc@...r.kernel.org
Cc: devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Prabhakar <prabhakar.csengg@...il.com>,
Biju Das <biju.das.jz@...renesas.com>
Subject: Re: [PATCH v6 2/5] irqchip: Add RZ/G2L IA55 Interrupt Controller
driver
On Sa, 2022-06-25 at 21:05 +0100, Lad Prabhakar wrote:
> Add a driver for the Renesas RZ/G2L Interrupt Controller.
>
> This supports external pins being used as interrupts. It supports
> one line for NMI, 8 external pins and 32 GPIO pins (out of 123)
> to be used as IRQ lines.
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
> ---
> drivers/irqchip/Kconfig | 8 +
> drivers/irqchip/Makefile | 1 +
> drivers/irqchip/irq-renesas-rzg2l.c | 393 ++++++++++++++++++++++++++++
> 3 files changed, 402 insertions(+)
> create mode 100644 drivers/irqchip/irq-renesas-rzg2l.c
>
[...]
> diff --git a/drivers/irqchip/irq-renesas-rzg2l.c b/drivers/irqchip/irq-renesas-rzg2l.c
> new file mode 100644
> index 000000000000..cc16fcf2bbc6
> --- /dev/null
> +++ b/drivers/irqchip/irq-renesas-rzg2l.c
> @@ -0,0 +1,393 @@
[...]
> +static int rzg2l_irqc_init(struct device_node *node, struct device_node *parent)
> +{
> + struct irq_domain *irq_domain, *parent_domain;
> + struct platform_device *pdev;
> + struct reset_control *resetn;
> + struct rzg2l_irqc_priv *priv;
> + int ret;
> +
> + pdev = of_find_device_by_node(node);
> + if (!pdev)
> + return -ENODEV;
> +
> + parent_domain = irq_find_host(parent);
> + if (!parent_domain) {
> + dev_err(&pdev->dev, "cannot find parent domain\n");
> + return -ENODEV;
> + }
> +
> + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + priv->base = devm_of_iomap(&pdev->dev, pdev->dev.of_node, 0, NULL);
> + if (IS_ERR(priv->base))
> + return PTR_ERR(priv->base);
> +
> + ret = rzg2l_irqc_parse_interrupts(priv, node);
> + if (ret) {
> + dev_err(&pdev->dev, "cannot parse interrupts: %d\n", ret);
> + return ret;
> + }
> +
> + resetn = devm_reset_control_get_exclusive_by_index(&pdev->dev, 0);
Why is this by index? I'd expect
resetn = devm_reset_control_get_exclusive(&pdev->dev, NULL);
should work just as well?
regards
Philipp
Powered by blists - more mailing lists