| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20220629075859.6939-1-a-m1@ti.com>
Date: Wed, 29 Jun 2022 13:28:59 +0530
From: Aparna M <a-m1@...com>
To: <nm@...com>, <vigneshr@...com>, <kristo@...nel.org>,
<ada@...rsis.com>, <pavel@....cz>
CC: <praneeth@...com>, <robh+dt@...nel.org>, <devarsht@...com>,
<s-adivi@...com>, <linux-arm-kernel@...ts.infradead.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-leds@...r.kernel.org>
Subject: [PATCH v2] arm64: dts: ti: k3-am642-sk: Add DT entry for onboard LEDs
AM642 SK has 8 leds connected to tpic2810 onboard. Add support for these
gpio leds.
Signed-off-by: Aparna M <a-m1@...com>
---
This patch is dependent on:
https://lore.kernel.org/all/20220223174215.17838-1-a-m1@ti.com/
v1 -> v2: Fixed led-controller name and changed led-7 funtion to show
heartbeat functionality. Rebased on top for 5.19-rc4.
arch/arm64/boot/dts/ti/k3-am642-sk.dts | 69 ++++++++++++++++++++++++++
1 file changed, 69 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
index 59f506cbd275..47476fd068a8 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
@@ -150,6 +150,67 @@
vin-supply = <&com8_ls_en>;
gpio = <&main_gpio0 48 GPIO_ACTIVE_HIGH>;
};
+
+ led-controller {
+ compatible = "gpio-leds";
+
+ led-0 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_INDICATOR;
+ function-enumerator = <1>;
+ gpios = <&exp2 0 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ led-1 {
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_INDICATOR;
+ function-enumerator = <2>;
+ gpios = <&exp2 1 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ led-2 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_INDICATOR;
+ function-enumerator = <3>;
+ gpios = <&exp2 2 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ led-3 {
+ color = <LED_COLOR_ID_AMBER>;
+ function = LED_FUNCTION_INDICATOR;
+ function-enumerator = <4>;
+ gpios = <&exp2 3 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ led-4 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_INDICATOR;
+ function-enumerator = <5>;
+ gpios = <&exp2 4 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ led-5 {
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_INDICATOR;
+ function-enumerator = <6>;
+ gpios = <&exp2 5 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ led-6 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_INDICATOR;
+ function-enumerator = <7>;
+ gpios = <&exp2 6 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ led-7 {
+ color = <LED_COLOR_ID_AMBER>;
+ function = LED_FUNCTION_HEARTBEAT;
+ function-enumerator = <8>;
+ linux,default-trigger = "heartbeat";
+ gpios = <&exp2 7 GPIO_ACTIVE_HIGH>;
+ };
+ };
};
&main_pmx0 {
@@ -316,6 +377,14 @@
"VPP_LDO_EN", "RPI_PS_3V3_En",
"RPI_PS_5V0_En", "RPI_HAT_DETECT";
};
+
+ exp2: gpio@60 {
+ compatible = "ti,tpic2810";
+ reg = <0x60>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names = "LED1","LED2","LED3","LED4","LED5","LED6","LED7","LED8";
+ };
};
&main_i2c3 {
--
2.17.1
Powered by blists - more mailing lists