| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sun, 3 Jul 2022 22:14:41 +0100
From: "Matthew Wilcox (Oracle)" <willy@...radead.org>
To: Andrew Morton <akpm@...ux-foundation.org>
Cc: "Matthew Wilcox (Oracle)" <willy@...radead.org>,
Arnd Bergmann <arnd@...db.de>, Mike Rapoport <rppt@...nel.org>,
Russell King <linux@...linux.org.uk>,
linux-arm-kernel@...ts.infradead.org, linux-mm@...ck.org,
linux-kernel@...r.kernel.org
Subject: [PATCH 15/14] arm: Rename PMD_ORDER to PMD_BITS
This is the number of bits used by a PMD entry, not the order of a PMD.
Signed-off-by: Matthew Wilcox (Oracle) <willy@...radead.org>
---
arch/arm/kernel/head.S | 34 +++++++++++++++++-----------------
1 file changed, 17 insertions(+), 17 deletions(-)
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 500612d3da2e..d16159ced58f 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -38,10 +38,10 @@
#ifdef CONFIG_ARM_LPAE
/* LPAE requires an additional page for the PGD */
#define PG_DIR_SIZE 0x5000
-#define PMD_ORDER 3
+#define PMD_BITS 3
#else
#define PG_DIR_SIZE 0x4000
-#define PMD_ORDER 2
+#define PMD_BITS 2
#endif
.globl swapper_pg_dir
@@ -240,7 +240,7 @@ __create_page_tables:
mov r6, r6, lsr #SECTION_SHIFT
1: orr r3, r7, r5, lsl #SECTION_SHIFT @ flags + kernel base
- str r3, [r4, r5, lsl #PMD_ORDER] @ identity mapping
+ str r3, [r4, r5, lsl #PMD_BITS] @ identity mapping
cmp r5, r6
addlo r5, r5, #1 @ next section
blo 1b
@@ -250,7 +250,7 @@ __create_page_tables:
* set two variables to indicate the physical start and end of the
* kernel.
*/
- add r0, r4, #KERNEL_OFFSET >> (SECTION_SHIFT - PMD_ORDER)
+ add r0, r4, #KERNEL_OFFSET >> (SECTION_SHIFT - PMD_BITS)
ldr r6, =(_end - 1)
adr_l r5, kernel_sec_start @ _pa(kernel_sec_start)
#if defined CONFIG_CPU_ENDIAN_BE8 || defined CONFIG_CPU_ENDIAN_BE32
@@ -259,8 +259,8 @@ __create_page_tables:
str r8, [r5] @ Save physical start of kernel (LE)
#endif
orr r3, r8, r7 @ Add the MMU flags
- add r6, r4, r6, lsr #(SECTION_SHIFT - PMD_ORDER)
-1: str r3, [r0], #1 << PMD_ORDER
+ add r6, r4, r6, lsr #(SECTION_SHIFT - PMD_BITS)
+1: str r3, [r0], #1 << PMD_BITS
add r3, r3, #1 << SECTION_SHIFT
cmp r0, r6
bls 1b
@@ -280,14 +280,14 @@ __create_page_tables:
mov r3, pc
mov r3, r3, lsr #SECTION_SHIFT
orr r3, r7, r3, lsl #SECTION_SHIFT
- add r0, r4, #(XIP_START & 0xff000000) >> (SECTION_SHIFT - PMD_ORDER)
- str r3, [r0, #((XIP_START & 0x00f00000) >> SECTION_SHIFT) << PMD_ORDER]!
+ add r0, r4, #(XIP_START & 0xff000000) >> (SECTION_SHIFT - PMD_BITS)
+ str r3, [r0, #((XIP_START & 0x00f00000) >> SECTION_SHIFT) << PMD_BITS]!
ldr r6, =(_edata_loc - 1)
- add r0, r0, #1 << PMD_ORDER
- add r6, r4, r6, lsr #(SECTION_SHIFT - PMD_ORDER)
+ add r0, r0, #1 << PMD_BITS
+ add r6, r4, r6, lsr #(SECTION_SHIFT - PMD_BITS)
1: cmp r0, r6
add r3, r3, #1 << SECTION_SHIFT
- strls r3, [r0], #1 << PMD_ORDER
+ strls r3, [r0], #1 << PMD_BITS
bls 1b
#endif
@@ -297,10 +297,10 @@ __create_page_tables:
*/
mov r0, r2, lsr #SECTION_SHIFT
cmp r2, #0
- ldrne r3, =FDT_FIXED_BASE >> (SECTION_SHIFT - PMD_ORDER)
+ ldrne r3, =FDT_FIXED_BASE >> (SECTION_SHIFT - PMD_BITS)
addne r3, r3, r4
orrne r6, r7, r0, lsl #SECTION_SHIFT
- strne r6, [r3], #1 << PMD_ORDER
+ strne r6, [r3], #1 << PMD_BITS
addne r6, r6, #1 << SECTION_SHIFT
strne r6, [r3]
@@ -319,7 +319,7 @@ __create_page_tables:
addruart r7, r3, r0
mov r3, r3, lsr #SECTION_SHIFT
- mov r3, r3, lsl #PMD_ORDER
+ mov r3, r3, lsl #PMD_BITS
add r0, r4, r3
mov r3, r7, lsr #SECTION_SHIFT
@@ -349,7 +349,7 @@ __create_page_tables:
* If we're using the NetWinder or CATS, we also need to map
* in the 16550-type serial port for the debug messages
*/
- add r0, r4, #0xff000000 >> (SECTION_SHIFT - PMD_ORDER)
+ add r0, r4, #0xff000000 >> (SECTION_SHIFT - PMD_BITS)
orr r3, r7, #0x7c000000
str r3, [r0]
#endif
@@ -359,10 +359,10 @@ __create_page_tables:
* Similar reasons here - for debug. This is
* only for Acorn RiscPC architectures.
*/
- add r0, r4, #0x02000000 >> (SECTION_SHIFT - PMD_ORDER)
+ add r0, r4, #0x02000000 >> (SECTION_SHIFT - PMD_BITS)
orr r3, r7, #0x02000000
str r3, [r0]
- add r0, r4, #0xd8000000 >> (SECTION_SHIFT - PMD_ORDER)
+ add r0, r4, #0xd8000000 >> (SECTION_SHIFT - PMD_BITS)
str r3, [r0]
#endif
#endif
--
2.35.1
Powered by blists - more mailing lists