[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <DU0PR04MB94176FE06778DDC1EFB7A36188819@DU0PR04MB9417.eurprd04.prod.outlook.com>
Date: Tue, 5 Jul 2022 07:55:49 +0000
From: Peng Fan <peng.fan@....com>
To: Georgi Djakov <djakov@...nel.org>,
"Peng Fan (OSS)" <peng.fan@....nxp.com>,
"shawnguo@...nel.org" <shawnguo@...nel.org>,
"s.hauer@...gutronix.de" <s.hauer@...gutronix.de>,
"festevam@...il.com" <festevam@...il.com>,
"robh+dt@...nel.org" <robh+dt@...nel.org>,
"krzysztof.kozlowski+dt@...aro.org"
<krzysztof.kozlowski+dt@...aro.org>, Abel Vesa <abel.vesa@....com>,
"abailon@...libre.com" <abailon@...libre.com>,
"l.stach@...gutronix.de" <l.stach@...gutronix.de>,
"laurent.pinchart@...asonboard.com"
<laurent.pinchart@...asonboard.com>,
"marex@...x.de" <marex@...x.de>,
"paul.elder@...asonboard.com" <paul.elder@...asonboard.com>,
"Markus.Niebel@...tq-group.com" <Markus.Niebel@...tq-group.com>,
"aford173@...il.com" <aford173@...il.com>,
"cw00.choi@...sung.com" <cw00.choi@...sung.com>,
"kyungmin.park@...sung.com" <kyungmin.park@...sung.com>,
"myungjoo.ham@...sung.com" <myungjoo.ham@...sung.com>
CC: "kernel@...gutronix.de" <kernel@...gutronix.de>,
"linux-pm@...r.kernel.org" <linux-pm@...r.kernel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
dl-linux-imx <linux-imx@....com>,
"abelvesa@...nel.org" <abelvesa@...nel.org>
Subject: RE: [PATCH V3 10/10] arm64: dts: imx8mp: add NoC node
Hi Georgi,
> Subject: Re: [PATCH V3 10/10] arm64: dts: imx8mp: add NoC node
>
>
> Hi Peng,
>
> On 3.07.22 12:11, Peng Fan (OSS) wrote:
> > From: Peng Fan <peng.fan@....com>
> >
> > Add i.MX8MP NoC node to make the interconnect i.MX8MP driver could
> work.
> > Currently dynamic frequency scaling of the i.MX8MP NoC has not been
> > supported, only NoC initial settings are configured by interconnect
> > driver.
> >
> > Signed-off-by: Peng Fan <peng.fan@....com>
> > ---
> > arch/arm64/boot/dts/freescale/imx8mp.dtsi | 22
> ++++++++++++++++++++++
> > 1 file changed, 22 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > index eb2d516278eb..13a2ee77d3c6 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > @@ -4,6 +4,7 @@
> > */
> >
> > #include <dt-bindings/clock/imx8mp-clock.h>
> > +#include <dt-bindings/interconnect/fsl,imx8mp.h>
>
> It's also possible to drop this line for now and add it in the next patches
> when we add the interconnect consumers. This will allow merging this DT
> patch independently. But it's up to Shawn.
>
> > #include <dt-bindings/power/imx8mp-power.h>
> > #include <dt-bindings/gpio/gpio.h>
> > #include <dt-bindings/input/input.h> @@ -1019,6 +1020,27 @@ eqos:
> > ethernet@...f0000 {
> > };
> > };
> >
> > + noc: interconnect@...00000 {
> > + compatible = "fsl,imx8mp-noc", "fsl,imx8m-noc",
> "syscon";
>
> I got the impression that we are dropping the syscon, or not?
I just checked the dt-bindings V1 mail. You are right, syscon
should be dropped.
>
> > + reg = <0x32700000 0x100000>;
> > + clocks = <&clk IMX8MP_CLK_NOC>;
> > + #interconnect-cells = <1>;
> > +
> > + operating-points-v2 = <&noc_opp_table>;
> > +
> > + noc_opp_table: opp-table {
> > + compatible = "operating-points-v2";
> > +
> > + opp-200M {
> > + opp-hz = /bits/ 64 <200000000>;
> > + };
> > +
> > + opp-1000M {
> > + opp-hz = /bits/ 64 <1000000000>;
> > + };
> > + };
> > + };
> > +
> > aips4: bus@...00000 {
> > compatible = "fsl,aips-bus", "simple-bus";
> > reg = <0x32c00000 0x400000>;
> Patches 1-9 look good and I am planning to merge them.
Thanks, Then I only need to repost this single patch for a new version.
Thanks,
Peng.
>
> Thanks,
> Georgi
Powered by blists - more mailing lists