lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20220709081834.GM5063@thinkpad>
Date:   Sat, 9 Jul 2022 13:48:34 +0530
From:   Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
To:     Johan Hovold <johan+linaro@...nel.org>
Cc:     Bjorn Helgaas <bhelgaas@...gle.com>,
        Lorenzo Pieralisi <lpieralisi@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Stanimir Varbanov <svarbanov@...sol.com>,
        Andy Gross <agross@...nel.org>,
        Bjorn Andersson <bjorn.andersson@...aro.org>,
        Krzysztof Wilczyński <kw@...ux.com>,
        Dmitry Baryshkov <dmitry.baryshkov@...aro.org>,
        linux-arm-msm@...r.kernel.org, linux-pci@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 06/10] PCI: qcom: Add support for SC8280XP

On Wed, Jun 29, 2022 at 04:09:56PM +0200, Johan Hovold wrote:
> The SC8280XP platform has seven PCIe controllers: two used with USB4,
> two 4-lane, two 2-lane and one 1-lane.
> 
> Add a new "qcom,pcie-sc8280xp" compatible string and reuse the 1.9.0
> ops.
> 
> Note that the SC8280XP controllers need two or three interconnect
> clocks to be enabled. Model these as optional clocks to avoid encoding
> devicetree data in the PCIe driver.
> 

There isn't much info available for these clocks. Since some of these types of
clocks are already present in bindings, I think this patch is fine by itself.

I will also try to find how these clocks are laid out. But that shouldn't stop
this patch IMO.

> Note that the same could be done for the SM8450 interconnect clocks and
> possibly also for the TBU clocks.
> 
> Signed-off-by: Johan Hovold <johan+linaro@...nel.org>

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>

Thanks,
Mani

> ---
>  drivers/pci/controller/dwc/pcie-qcom.c | 22 ++++++++++++++++++++--
>  1 file changed, 20 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index ff1b40f213c1..da3f1cdc4ba6 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -160,7 +160,7 @@ struct qcom_pcie_resources_2_3_3 {
>  
>  /* 6 clocks typically, 7 for sm8250 */
>  struct qcom_pcie_resources_2_7_0 {
> -	struct clk_bulk_data clks[9];
> +	struct clk_bulk_data clks[12];
>  	int num_clks;
>  	struct regulator_bulk_data supplies[2];
>  	struct reset_control *pci_reset;
> @@ -1119,6 +1119,7 @@ static int qcom_pcie_get_resources_2_7_0(struct qcom_pcie *pcie)
>  	struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0;
>  	struct dw_pcie *pci = pcie->pci;
>  	struct device *dev = pci->dev;
> +	unsigned int num_clks, num_opt_clks;
>  	unsigned int idx;
>  	int ret;
>  
> @@ -1148,9 +1149,20 @@ static int qcom_pcie_get_resources_2_7_0(struct qcom_pcie *pcie)
>  	if (pcie->cfg->has_aggre1_clk)
>  		res->clks[idx++].id = "aggre1";
>  
> +	num_clks = idx;
> +
> +	ret = devm_clk_bulk_get(dev, num_clks, res->clks);
> +	if (ret < 0)
> +		return ret;
> +
> +	res->clks[idx++].id = "noc_aggr_4";
> +	res->clks[idx++].id = "noc_aggr_south_sf";
> +	res->clks[idx++].id = "cnoc_qx";
> +
> +	num_opt_clks = idx - num_clks;
>  	res->num_clks = idx;
>  
> -	ret = devm_clk_bulk_get(dev, res->num_clks, res->clks);
> +	ret = devm_clk_bulk_get_optional(dev, num_opt_clks, res->clks + num_clks);
>  	if (ret < 0)
>  		return ret;
>  
> @@ -1449,6 +1461,11 @@ static const struct qcom_pcie_cfg ipq4019_cfg = {
>  	.ops = &ops_2_4_0,
>  };
>  
> +static const struct qcom_pcie_cfg sc8280xp_cfg = {
> +	.ops = &ops_1_9_0,
> +	.has_ddrss_sf_tbu_clk = true,
> +};
> +
>  static const struct qcom_pcie_cfg sdm845_cfg = {
>  	.ops = &ops_2_7_0,
>  	.has_tbu_clk = true,
> @@ -1613,6 +1630,7 @@ static const struct of_device_id qcom_pcie_match[] = {
>  	{ .compatible = "qcom,pcie-sm8150", .data = &sm8150_cfg },
>  	{ .compatible = "qcom,pcie-sm8250", .data = &sm8250_cfg },
>  	{ .compatible = "qcom,pcie-sc8180x", .data = &sc8180x_cfg },
> +	{ .compatible = "qcom,pcie-sc8280xp", .data = &sc8280xp_cfg },
>  	{ .compatible = "qcom,pcie-sm8450-pcie0", .data = &sm8450_pcie0_cfg },
>  	{ .compatible = "qcom,pcie-sm8450-pcie1", .data = &sm8450_pcie1_cfg },
>  	{ .compatible = "qcom,pcie-sc7280", .data = &sc7280_cfg },
> -- 
> 2.35.1
> 

-- 
மணிவண்ணன் சதாசிவம்

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ