| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220711181825.52318-1-alexander.atanasov@virtuozzo.com>
Date: Mon, 11 Jul 2022 18:18:22 +0000
From: Alexander Atanasov <alexander.atanasov@...tuozzo.com>
To: "K. Y. Srinivasan" <kys@...rosoft.com>,
Haiyang Zhang <haiyangz@...rosoft.com>,
Stephen Hemminger <sthemmin@...rosoft.com>,
Wei Liu <wei.liu@...nel.org>, Dexuan Cui <decui@...rosoft.com>
Cc: kernel@...nvz.org,
Alexander Atanasov <alexander.atanasov@...tuozzo.com>,
linux-hyperv@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH v3 1/1] Create debugfs file with hyper-v balloon usage information
Allow the guest to know how much it is ballooned by the host.
It is useful when debugging out of memory conditions.
When host gets back memory from the guest it is accounted
as used memory in the guest but the guest have no way to know
how much it is actually ballooned.
Expose current state, flags and max possible memory to the guest.
While at it - fix a 10+ years old typo.
Signed-off-by: Alexander Atanasov <alexander.atanasov@...tuozzo.com>
---
drivers/hv/hv_balloon.c | 135 ++++++++++++++++++++++++++++++++++++++--
1 file changed, 129 insertions(+), 6 deletions(-)
V1->V2:
- Fix C&P errors
V2->V3:
- Move computation to a separate funcion
- Remove ifdefs to reduce code clutter
This patch addresses your suggestions. Once again, sorry i have missed
your email reply last time.
diff --git a/drivers/hv/hv_balloon.c b/drivers/hv/hv_balloon.c
index 91e8a72eee14..ba52d3a3e3e3 100644
--- a/drivers/hv/hv_balloon.c
+++ b/drivers/hv/hv_balloon.c
@@ -11,6 +11,7 @@
#include <linux/kernel.h>
#include <linux/jiffies.h>
#include <linux/mman.h>
+#include <linux/debugfs.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/module.h>
@@ -248,7 +249,7 @@ struct dm_capabilities_resp_msg {
* num_committed: Committed memory in pages.
* page_file_size: The accumulated size of all page files
* in the system in pages.
- * zero_free: The nunber of zero and free pages.
+ * zero_free: The number of zero and free pages.
* page_file_writes: The writes to the page file in pages.
* io_diff: An indicator of file cache efficiency or page file activity,
* calculated as File Cache Page Fault Count - Page Read Count.
@@ -567,6 +568,11 @@ struct hv_dynmem_device {
__u32 version;
struct page_reporting_dev_info pr_dev_info;
+
+ /*
+ * Maximum number of pages that can be hot_add-ed
+ */
+ __u64 max_dynamic_page_count;
};
static struct hv_dynmem_device dm_device;
@@ -1078,6 +1084,7 @@ static void process_info(struct hv_dynmem_device *dm, struct dm_info_msg *msg)
pr_info("Max. dynamic memory size: %llu MB\n",
(*max_page_count) >> (20 - HV_HYP_PAGE_SHIFT));
+ dm->max_dynamic_page_count = *max_page_count;
}
break;
@@ -1116,6 +1123,19 @@ static unsigned long compute_balloon_floor(void)
return min_pages;
}
+/*
+ * Compute total committed memory pages
+ */
+
+static unsigned long get_pages_committed(struct hv_dynmem_device *dm)
+{
+ return vm_memory_committed() +
+ dm->num_pages_ballooned +
+ (dm->num_pages_added > dm->num_pages_onlined ?
+ dm->num_pages_added - dm->num_pages_onlined : 0) +
+ compute_balloon_floor();
+}
+
/*
* Post our status as it relates memory pressure to the
* host. Host expects the guests to post this status
@@ -1157,11 +1177,7 @@ static void post_status(struct hv_dynmem_device *dm)
* asking us to balloon them out.
*/
num_pages_avail = si_mem_available();
- num_pages_committed = vm_memory_committed() +
- dm->num_pages_ballooned +
- (dm->num_pages_added > dm->num_pages_onlined ?
- dm->num_pages_added - dm->num_pages_onlined : 0) +
- compute_balloon_floor();
+ num_pages_committed = get_pages_committed(dm);
trace_balloon_status(num_pages_avail, num_pages_committed,
vm_memory_committed(), dm->num_pages_ballooned,
@@ -1807,6 +1823,109 @@ static int balloon_connect_vsp(struct hv_device *dev)
return ret;
}
+/*
+ * DEBUGFS Interface
+ */
+#ifdef CONFIG_DEBUG_FS
+
+/**
+ * hv_balloon_debug_show - shows statistics of balloon operations.
+ * @f: pointer to the &struct seq_file.
+ * @offset: ignored.
+ *
+ * Provides the statistics that can be accessed in hv-balloon in the debugfs.
+ *
+ * Return: zero on success or an error code.
+ */
+static int hv_balloon_debug_show(struct seq_file *f, void *offset)
+{
+ struct hv_dynmem_device *dm = f->private;
+ char *sname;
+
+ seq_printf(f, "%-22s: %u.%u\n", "host_version",
+ DYNMEM_MAJOR_VERSION(dm->version),
+ DYNMEM_MINOR_VERSION(dm->version));
+
+ seq_printf(f, "%-22s:", "capabilities");
+ if (ballooning_enabled())
+ seq_puts(f, " enabled");
+
+ if (hot_add_enabled())
+ seq_puts(f, " hot_add");
+
+ seq_puts(f, "\n");
+
+ seq_printf(f, "%-22s: %u", "state", dm->state);
+ switch (dm->state) {
+ case DM_INITIALIZING:
+ sname = "Initializing";
+ break;
+ case DM_INITIALIZED:
+ sname = "Initialized";
+ break;
+ case DM_BALLOON_UP:
+ sname = "Balloon Up";
+ break;
+ case DM_BALLOON_DOWN:
+ sname = "Balloon Down";
+ break;
+ case DM_HOT_ADD:
+ sname = "Hot Add";
+ break;
+ case DM_INIT_ERROR:
+ sname = "Error";
+ break;
+ default:
+ sname = "Unknown";
+ }
+ seq_printf(f, " (%s)\n", sname);
+
+ /* HV Page Size */
+ seq_printf(f, "%-22s: %ld\n", "page_size", HV_HYP_PAGE_SIZE);
+
+ /* Pages added with hot_add */
+ seq_printf(f, "%-22s: %u\n", "pages_added", dm->num_pages_added);
+
+ /* pages that are "onlined"/used from pages_added */
+ seq_printf(f, "%-22s: %u\n", "pages_onlined", dm->num_pages_onlined);
+
+ /* pages we have given back to host */
+ seq_printf(f, "%-22s: %u\n", "pages_ballooned", dm->num_pages_ballooned);
+
+ seq_printf(f, "%-22s: %lu\n", "total_pages_commited",
+ get_pages_committed(dm));
+
+ seq_printf(f, "%-22s: %llu\n", "max_dynamic_page_count",
+ dm->max_dynamic_page_count);
+
+ return 0;
+}
+
+DEFINE_SHOW_ATTRIBUTE(hv_balloon_debug);
+
+static void hv_balloon_debugfs_init(struct hv_dynmem_device *b)
+{
+ debugfs_create_file("hv-balloon", 0444, NULL, b,
+ &hv_balloon_debug_fops);
+}
+
+static void hv_balloon_debugfs_exit(struct hv_dynmem_device *b)
+{
+ debugfs_remove(debugfs_lookup("hv-balloon", NULL));
+}
+
+#else
+
+static inline void hv_balloon_debugfs_init(struct hv_dynmem_device *b)
+{
+}
+
+static inline void hv_balloon_debugfs_exit(struct hv_dynmem_device *b)
+{
+}
+
+#endif /* CONFIG_DEBUG_FS */
+
static int balloon_probe(struct hv_device *dev,
const struct hv_vmbus_device_id *dev_id)
{
@@ -1854,6 +1973,8 @@ static int balloon_probe(struct hv_device *dev,
goto probe_error;
}
+ hv_balloon_debugfs_init(&dm_device);
+
return 0;
probe_error:
@@ -1879,6 +2000,8 @@ static int balloon_remove(struct hv_device *dev)
if (dm->num_pages_ballooned != 0)
pr_warn("Ballooned pages: %d\n", dm->num_pages_ballooned);
+ hv_balloon_debugfs_exit(dm);
+
cancel_work_sync(&dm->balloon_wrk.wrk);
cancel_work_sync(&dm->ha_wrk.wrk);
--
2.25.1
Powered by blists - more mailing lists