linux-kernel - RE: [RFC 1/2] PCI: imx6: Make sure the DBI register can be changed

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <AS8PR04MB8676FA05BEEE264A9FE1F6538C869@AS8PR04MB8676.eurprd04.prod.outlook.com>
Date:   Tue, 12 Jul 2022 01:30:02 +0000
From:   Hongxing Zhu <hongxing.zhu@....com>
To:     Bjorn Helgaas <helgaas@...nel.org>
CC:     "l.stach@...gutronix.de" <l.stach@...gutronix.de>,
        "bhelgaas@...gle.com" <bhelgaas@...gle.com>,
        "lorenzo.pieralisi@....com" <lorenzo.pieralisi@....com>,
        "festevam@...il.com" <festevam@...il.com>,
        "linux-pci@...r.kernel.org" <linux-pci@...r.kernel.org>,
        "linux-arm-kernel@...ts.infradead.org" 
        <linux-arm-kernel@...ts.infradead.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        "kernel@...gutronix.de" <kernel@...gutronix.de>,
        dl-linux-imx <linux-imx@....com>
Subject: RE: [RFC 1/2] PCI: imx6: Make sure the DBI register can be changed

> -----Original Message-----
> From: Bjorn Helgaas <helgaas@...nel.org>
> Sent: 2022年7月12日 6:17
> To: Hongxing Zhu <hongxing.zhu@....com>
> Cc: l.stach@...gutronix.de; bhelgaas@...gle.com;
> lorenzo.pieralisi@....com; festevam@...il.com; linux-pci@...r.kernel.org;
> linux-arm-kernel@...ts.infradead.org; linux-kernel@...r.kernel.org;
> kernel@...gutronix.de; dl-linux-imx <linux-imx@....com>
> Subject: Re: [RFC 1/2] PCI: imx6: Make sure the DBI register can be changed
> 
> Hi Richard,
> 
> On Wed, May 18, 2022 at 05:35:27PM +0800, Richard Zhu wrote:
> > The PCIE_DBI_RO_WR_EN bit should be set when write some DBI registers.
> > To make sure that the DBI registers are writable, set the
> > PCIE_DBI_RO_WR_EN properly when touch the DBI registers.
> >
> > Signed-off-by: Richard Zhu <hongxing.zhu@....com>
> > ---
> >  drivers/pci/controller/dwc/pci-imx6.c | 4 ++++
> >  1 file changed, 4 insertions(+)
> >
> > diff --git a/drivers/pci/controller/dwc/pci-imx6.c
> > b/drivers/pci/controller/dwc/pci-imx6.c
> > index 6619e3caffe2..30641d2dda14 100644
> > --- a/drivers/pci/controller/dwc/pci-imx6.c
> > +++ b/drivers/pci/controller/dwc/pci-imx6.c
> > @@ -797,10 +797,12 @@ static int imx6_pcie_start_link(struct dw_pcie
> *pci)
> >  	 * started in Gen2 mode, there is a possibility the devices on the
> >  	 * bus will not be detected at all.  This happens with PCIe switches.
> >  	 */
> > +	dw_pcie_dbi_ro_wr_en(pci);
> 
> What's the status of this patch?  I don't see this change included in your v14
> series [1].  That series has a lot of imx6 updates, so I would have thought
> you'd include this change in it.  Or maybe this change turned out not to be
> needed?
Hi Bjorn:
Thanks for your kindly help.
The v14 series[1] had been reviewing for a quite time. I'm afraid that
 this series might miss the L5.20 merge window if I add new patch
 into it from time to time.
If you don't think so, I can merge the first one, and re-issue the v15 a
moment later.
> 
> What about the 2/2 patch?
i.MX8MP PCIe supports the PCIe GEN3 speed, the second patch is used to extend
 the link speed support capability, and prepared for i.MX8MP PCIe support.
I assumed that these two patches can be contained in i.MX8MP PCIe support
patch-set before.

> 
> They're both marked "RFC" which is sometimes a hint that the author isn't
> really committed to the patch, so sometimes they don't get the attention they
> deserve.
> 
I see. Would remove the "RFC" when issue the patch next time.
Thanks.

Best Regards
Richard Zhu

> Bjorn
> 
> [1]
> https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flore.ker
> nel.org%2Fr%2F1656645935-1370-1-git-send-email-hongxing.zhu%40nxp.com
> &amp;data=05%7C01%7Chongxing.zhu%40nxp.com%7C62e9d070313048589
> 90308da638b18b4%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C
> 637931746310188774%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAw
> MDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%
> 7C&amp;sdata=Oz2Zgdch0gI2Qd66AiM5iWmp23uwn1SkH07gDAQhGQY%3D
> &amp;reserved=0
> 
> >  	tmp = dw_pcie_readl_dbi(pci, offset + PCI_EXP_LNKCAP);
> >  	tmp &= ~PCI_EXP_LNKCAP_SLS;
> >  	tmp |= PCI_EXP_LNKCAP_SLS_2_5GB;
> >  	dw_pcie_writel_dbi(pci, offset + PCI_EXP_LNKCAP, tmp);
> > +	dw_pcie_dbi_ro_wr_dis(pci);
> >
> >  	/* Start LTSSM. */
> >  	imx6_pcie_ltssm_enable(dev);
> > @@ -809,6 +811,7 @@ static int imx6_pcie_start_link(struct dw_pcie
> > *pci)
> >
> >  	if (pci->link_gen == 2) {
> >  		/* Allow Gen2 mode after the link is up. */
> > +		dw_pcie_dbi_ro_wr_en(pci);
> >  		tmp = dw_pcie_readl_dbi(pci, offset + PCI_EXP_LNKCAP);
> >  		tmp &= ~PCI_EXP_LNKCAP_SLS;
> >  		tmp |= PCI_EXP_LNKCAP_SLS_5_0GB;
> > @@ -821,6 +824,7 @@ static int imx6_pcie_start_link(struct dw_pcie *pci)
> >  		tmp = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL);
> >  		tmp |= PORT_LOGIC_SPEED_CHANGE;
> >  		dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, tmp);
> > +		dw_pcie_dbi_ro_wr_dis(pci);
> >
> >  		if (imx6_pcie->drvdata->flags &
> >  		    IMX6_PCIE_FLAG_IMX6_SPEED_CHANGE) {
> > --
> > 2.25.1
> >
> >
> > _______________________________________________
> > linux-arm-kernel mailing list
> > linux-arm-kernel@...ts.infradead.org
> > https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists
> > .infradead.org%2Fmailman%2Flistinfo%2Flinux-arm-kernel&amp;data=05%7
> C0
> >
> 1%7Chongxing.zhu%40nxp.com%7C62e9d07031304858990308da638b18b4%
> 7C686ea1
> >
> d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C637931746310188774%7CUnk
> nown%7CTW
> >
> FpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXV
> CI6
> >
> Mn0%3D%7C3000%7C%7C%7C&amp;sdata=mG6ix8VqqWocpp62GIWxgQOpE
> xSCMDJivto%2
> > BmqgOZHs%3D&amp;reserved=0