[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAG3jFyuz-9fDXXziRzZBhGQ2NC3R2nFW=aeimghTZXGCraPbuw@mail.gmail.com>
Date: Tue, 12 Jul 2022 10:11:16 +0200
From: Robert Foss <robert.foss@...aro.org>
To: allen <allen.chen@....com.tw>
Cc: Pin-yen Lin <treapking@...gle.com>,
Jau-Chih Tseng <Jau-Chih.Tseng@....com.tw>,
Kenneth Hung <Kenneth.Hung@....com.tw>,
Hermes Wu <Hermes.Wu@....com.tw>,
Pin-Yen Lin <treapking@...omium.org>,
Andrzej Hajda <andrzej.hajda@...el.com>,
Neil Armstrong <narmstrong@...libre.com>,
Laurent Pinchart <Laurent.pinchart@...asonboard.com>,
Jonas Karlman <jonas@...boo.se>,
Jernej Skrabec <jernej.skrabec@...il.com>,
David Airlie <airlied@...ux.ie>,
Daniel Vetter <daniel@...ll.ch>,
"open list:DRM DRIVERS" <dri-devel@...ts.freedesktop.org>,
open list <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 2/3] drm/bridge: it6505: Add i2c api power on check
On Thu, 7 Jul 2022 at 10:06, allen <allen.chen@....com.tw> wrote:
>
> From: allen chen <allen.chen@....com.tw>
>
> Use i2c bus to read/write when it6505 power off will occure i2c error.
^^^ typ-o
Change occure to occur.
This is an issue that would have been caught by running checkpatch
--strict, please try to run it on all patches before submission.
> Add this check will prevent i2c error when it6505 power off.
>
> Signed-off-by: Pin-Yen Lin <treapking@...omium.org>
> Signed-off-by: Allen Chen <allen.chen@....com.tw>
>
> ---
> drivers/gpu/drm/bridge/ite-it6505.c | 12 ++++++++++--
> 1 file changed, 10 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/ite-it6505.c b/drivers/gpu/drm/bridge/ite-it6505.c
> index aa5e0aa1af85..cfd2c3275dc5 100644
> --- a/drivers/gpu/drm/bridge/ite-it6505.c
> +++ b/drivers/gpu/drm/bridge/ite-it6505.c
> @@ -518,6 +518,9 @@ static int it6505_read(struct it6505 *it6505, unsigned int reg_addr)
> int err;
> struct device *dev = &it6505->client->dev;
>
> + if (!it6505->powered)
> + return -ENODEV;
> +
> err = regmap_read(it6505->regmap, reg_addr, &value);
> if (err < 0) {
> dev_err(dev, "read failed reg[0x%x] err: %d", reg_addr, err);
> @@ -533,6 +536,9 @@ static int it6505_write(struct it6505 *it6505, unsigned int reg_addr,
> int err;
> struct device *dev = &it6505->client->dev;
>
> + if (!it6505->powered)
> + return -ENODEV;
> +
> err = regmap_write(it6505->regmap, reg_addr, reg_val);
>
> if (err < 0) {
> @@ -550,6 +556,9 @@ static int it6505_set_bits(struct it6505 *it6505, unsigned int reg,
> int err;
> struct device *dev = &it6505->client->dev;
>
> + if (!it6505->powered)
> + return -ENODEV;
> +
> err = regmap_update_bits(it6505->regmap, reg, mask, value);
> if (err < 0) {
> dev_err(dev, "write reg[0x%x] = 0x%x mask = 0x%x failed err %d",
> @@ -2553,13 +2562,12 @@ static int it6505_poweron(struct it6505 *it6505)
> usleep_range(10000, 20000);
> }
>
> + it6505->powered = true;
> it6505_reset_logic(it6505);
> it6505_int_mask_enable(it6505);
> it6505_init(it6505);
> it6505_lane_off(it6505);
>
> - it6505->powered = true;
> -
> return 0;
> }
>
> --
> 2.25.1
>
With that fixed:
Reviewed-by: Robert Foss <robert.foss@...aro.org>
Powered by blists - more mailing lists