| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <CLIOQ73QARAO.C0NGVX11Q4LN@otso>
Date: Mon, 18 Jul 2022 11:46:52 +0200
From: "Luca Weiss" <luca.weiss@...rphone.com>
To: "Georgi Djakov" <djakov@...nel.org>,
<linux-arm-msm@...r.kernel.org>
Cc: <~postmarketos/upstreaming@...ts.sr.ht>,
<phone-devel@...r.kernel.org>, "Andy Gross" <agross@...nel.org>,
"Bjorn Andersson" <bjorn.andersson@...aro.org>,
"Rob Herring" <robh+dt@...nel.org>,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@...aro.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v3 5/5] arm64: dts: qcom: sm6350: Add interconnect
support
Hi Georgi,
On Mon Jul 18, 2022 at 9:58 AM CEST, Georgi Djakov wrote:
> On 25.05.22 17:44, Luca Weiss wrote:
> > Add all the different NoC providers that are found in SM6350 and
> > populate different nodes that use the interconnect properties.
> >
> > Signed-off-by: Luca Weiss <luca.weiss@...rphone.com>
> > ---
> > Changes since v2:
> > * none
> >
> > arch/arm64/boot/dts/qcom/sm6350.dtsi | 109 +++++++++++++++++++++++++++
> > 1 file changed, 109 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
> > index fb1a0f662575..119073f19285 100644
> > --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
> > @@ -1,11 +1,13 @@
> > // SPDX-License-Identifier: BSD-3-Clause
> > /*
> > * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@...ainline.org>
> > + * Copyright (c) 2022, Luca Weiss <luca.weiss@...rphone.com>
> > */
> >
> > #include <dt-bindings/clock/qcom,gcc-sm6350.h>
> > #include <dt-bindings/clock/qcom,rpmh.h>
> > #include <dt-bindings/gpio/gpio.h>
> > +#include <dt-bindings/interconnect/qcom,sm6350.h>
> > #include <dt-bindings/interrupt-controller/arm-gic.h>
> > #include <dt-bindings/mailbox/qcom-ipcc.h>
> > #include <dt-bindings/power/qcom-rpmpd.h>
> > @@ -539,6 +541,10 @@ i2c0: i2c@...000 {
> > interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
> > #address-cells = <1>;
> > #size-cells = <0>;
> > + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> > + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
> > + <&aggre1_noc MASTER_QUP_0 0 &clk_virt SLAVE_EBI_CH0 0>;
> > + interconnect-names = "qup-core", "qup-config", "qup-memory";
> > status = "disabled";
> > };
> >
> > @@ -552,6 +558,10 @@ i2c2: i2c@...000 {
> > interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
> > #address-cells = <1>;
> > #size-cells = <0>;
> > + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> > + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
> > + <&aggre1_noc MASTER_QUP_0 0 &clk_virt SLAVE_EBI_CH0 0>;
> > + interconnect-names = "qup-core", "qup-config", "qup-memory";
> > status = "disabled";
> > };
> > };
> > @@ -578,6 +588,10 @@ i2c6: i2c@...000 {
> > interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
> > #address-cells = <1>;
> > #size-cells = <0>;
> > + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> > + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
> > + <&aggre2_noc MASTER_QUP_1 0 &clk_virt SLAVE_EBI_CH0 0>;
> > + interconnect-names = "qup-core", "qup-config", "qup-memory";
> > status = "disabled";
> > };
> >
> > @@ -591,6 +605,10 @@ i2c7: i2c@...000 {
> > interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
> > #address-cells = <1>;
> > #size-cells = <0>;
> > + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> > + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
> > + <&aggre2_noc MASTER_QUP_1 0 &clk_virt SLAVE_EBI_CH0 0>;
> > + interconnect-names = "qup-core", "qup-config", "qup-memory";
> > status = "disabled";
> > };
> >
> > @@ -604,6 +622,10 @@ i2c8: i2c@...000 {
> > interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
> > #address-cells = <1>;
> > #size-cells = <0>;
> > + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> > + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
> > + <&aggre2_noc MASTER_QUP_1 0 &clk_virt SLAVE_EBI_CH0 0>;
> > + interconnect-names = "qup-core", "qup-config", "qup-memory";
> > status = "disabled";
> > };
> >
> > @@ -615,6 +637,9 @@ uart9: serial@...000 {
> > pinctrl-names = "default";
> > pinctrl-0 = <&qup_uart9_default>;
> > interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
> > + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> > + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
> > + interconnect-names = "qup-core", "qup-config";
> > status = "disabled";
> > };
> >
> > @@ -628,11 +653,62 @@ i2c10: i2c@...000 {
> > interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
> > #address-cells = <1>;
> > #size-cells = <0>;
> > + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> > + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
> > + <&aggre2_noc MASTER_QUP_1 0 &clk_virt SLAVE_EBI_CH0 0>;
> > + interconnect-names = "qup-core", "qup-config", "qup-memory";
> > status = "disabled";
> > };
> >
> > };
> >
> > + config_noc: interconnect@...0000 {
> > + compatible = "qcom,sm6350-config-noc";
> > + reg = <0 0x01500000 0 0x28000>;
> > + #interconnect-cells = <2>;
> > + qcom,bcm-voters = <&apps_bcm_voter>;
> > + };
> > +
> > + system_noc: interconnect@...0000 {
> > + compatible = "qcom,sm6350-system-noc";
> > + reg = <0 0x01620000 0 0x17080>;
> > + #interconnect-cells = <2>;
> > + qcom,bcm-voters = <&apps_bcm_voter>;
> > +
> > + clk_virt: interconnect-clk-virt {
> > + compatible = "qcom,sm6350-clk-virt";
> > + #interconnect-cells = <2>;
> > + qcom,bcm-voters = <&apps_bcm_voter>;
> > + };
> > + };
> > +
> > + aggre1_noc: interconnect@...0000 {
> > + compatible = "qcom,sm6350-aggre1-noc";
> > + reg = <0 0x016e0000 0 0x15080>;
> > + #interconnect-cells = <2>;
> > + qcom,bcm-voters = <&apps_bcm_voter>;
> > + };
> > +
> > + aggre2_noc: interconnect@...0000 {
> > + compatible = "qcom,sm6350-aggre2-noc";
> > + reg = <0 0x01700000 0 0x1f880>;
> > + #interconnect-cells = <2>;
> > + qcom,bcm-voters = <&apps_bcm_voter>;
> > +
> > + compute_noc: interconnect-compute-noc {
> > + compatible = "qcom,sm6350-compute-noc";
> > + #interconnect-cells = <2>;
> > + qcom,bcm-voters = <&apps_bcm_voter>;
> > + };
> > + };
> > +
> > + mmss_noc: interconnect@...0000 {
> > + compatible = "qcom,sm6350-mmss-noc";
> > + reg = <0 0x01740000 0 0x1c100>;
> > + #interconnect-cells = <2>;
> > + qcom,bcm-voters = <&apps_bcm_voter>;
> > + };
> > +
> > ufs_mem_hc: ufs@...4000 {
> > compatible = "qcom,sm6350-ufshc", "qcom,ufshc",
> > "jedec,ufs-2.0";
> > @@ -933,6 +1009,10 @@ sdhc_2: sdhci@...4000 {
> > <&gcc GCC_SDCC2_APPS_CLK>,
> > <&rpmhcc RPMH_CXO_CLK>;
> > clock-names = "iface", "core", "xo";
> > + interconnects = <&aggre2_noc MASTER_SDCC_2 0 &clk_virt SLAVE_EBI_CH0 0>,
> > + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_SDCC_2 0>;
> > + interconnect-names = "sdhc-ddr", "cpu-sdhc";
> > +
> > qcom,dll-config = <0x0007642c>;
> > qcom,ddr-config = <0x80040868>;
> > power-domains = <&rpmhpd 0>;
> > @@ -947,11 +1027,15 @@ sdhc2_opp_table: sdhc2-opp-table {
> > opp-100000000 {
> > opp-hz = /bits/ 64 <100000000>;
> > required-opps = <&rpmhpd_opp_svs_l1>;
> > + opp-peak-kBps = <790000 131000>;
> > + opp-avg-kBps = <50000 50000>;
> > };
> >
> > opp-202000000 {
> > opp-hz = /bits/ 64 <202000000>;
> > required-opps = <&rpmhpd_opp_nom>;
> > + opp-peak-kBps = <3190000 294000>;
> > + opp-avg-kBps = <261438 300000>;
>
> Just wondering where do these values come from? Are they from the downstream DT?
> The rest looks good to me.
Exactly, the values are part of downstream dtsi[0]. The docs for this
property are:
- qcom,msm-bus,vectors-KBps:
Arrays of unsigned integers representing:
* master-id
* slave-id
* arbitrated bandwidth in KBps
* instantaneous bandwidth in KBps
The first two paths downstream are consolidated into one here, the third
downstream is the second one here.
[0] https://android.googlesource.com/kernel/msm-extra/devicetree/+/refs/tags/android-12.1.0_r0.15/qcom/lagoon.dtsi#3165
Hope that clears it up!
Regards
Luca
>
> Thanks,
> Georgi
>
> > };
> > };
> > };
> > @@ -1017,12 +1101,33 @@ dp_phy: dp-phy@...a200 {
> > };
> > };
> >
> > + dc_noc: interconnect@...0000 {
> > + compatible = "qcom,sm6350-dc-noc";
> > + reg = <0 0x09160000 0 0x3200>;
> > + #interconnect-cells = <2>;
> > + qcom,bcm-voters = <&apps_bcm_voter>;
> > + };
> > +
> > system-cache-controller@...0000 {
> > compatible = "qcom,sm6350-llcc";
> > reg = <0 0x09200000 0 0x50000>, <0 0x09600000 0 0x50000>;
> > reg-names = "llcc_base", "llcc_broadcast_base";
> > };
> >
> > + gem_noc: interconnect@...0000 {
> > + compatible = "qcom,sm6350-gem-noc";
> > + reg = <0 0x09680000 0 0x3e200>;
> > + #interconnect-cells = <2>;
> > + qcom,bcm-voters = <&apps_bcm_voter>;
> > + };
> > +
> > + npu_noc: interconnect@...0000 {
> > + compatible = "qcom,sm6350-npu-noc";
> > + reg = <0 0x09990000 0 0x1600>;
> > + #interconnect-cells = <2>;
> > + qcom,bcm-voters = <&apps_bcm_voter>;
> > + };
> > +
> > usb_1: usb@...8800 {
> > compatible = "qcom,sm6350-dwc3", "qcom,dwc3";
> > reg = <0 0x0a6f8800 0 0x400>;
> > @@ -1051,6 +1156,10 @@ usb_1: usb@...8800 {
> >
> > resets = <&gcc GCC_USB30_PRIM_BCR>;
> >
> > + interconnects = <&aggre2_noc MASTER_USB3 0 &clk_virt SLAVE_EBI_CH0 0>,
> > + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3 0>;
> > + interconnect-names = "usb-ddr", "apps-usb";
> > +
> > usb_1_dwc3: usb@...0000 {
> > compatible = "snps,dwc3";
> > reg = <0 0x0a600000 0 0xcd00>;
Powered by blists - more mailing lists