| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 3 Aug 2022 14:36:11 +0100
From: "Lad, Prabhakar" <prabhakar.csengg@...il.com>
To: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Cc: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Philipp Zabel <p.zabel@...gutronix.de>,
Laurent Pinchart <laurent.pinchart@...asonboard.com>,
Jacopo Mondi <jacopo@...ndi.org>,
Niklas Söderlund <niklas.soderlund@...natech.se>,
Sakari Ailus <sakari.ailus@...ux.intel.com>,
Hans Verkuil <hverkuil-cisco@...all.nl>,
Geert Uytterhoeven <geert+renesas@...der.be>,
linux-media <linux-media@...r.kernel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>,
Linux-Renesas <linux-renesas-soc@...r.kernel.org>,
LKML <linux-kernel@...r.kernel.org>,
Biju Das <biju.das.jz@...renesas.com>
Subject: Re: [PATCH 1/4] media: dt-bindings: media: Document RZ/G2L CSI-2 block
Hi Krzysztof,
Thank you for the review.
On Tue, Aug 2, 2022 at 8:36 AM Krzysztof Kozlowski
<krzysztof.kozlowski@...aro.org> wrote:
>
> On 01/08/2022 23:47, Lad Prabhakar wrote:
> > Document the CSI-2 block which is part of CRU found in Renesas
> > RZ/G2L SoC.
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
> > ---
> > RFC v2 -> v1
>
> Too many "media" in the subject prefixes.
>
I followed the pattern seen by "git log --oneline
Documentation/devicetree/bindings/media/", but I do agree I can drop
the extra "media" after "dt-bindings:"
> > * Fixed review comments pointed by Rob and Jacopo.
> >
> > RFC v1 -> RFC v2
> > * New patch
> > ---
> > .../bindings/media/renesas,rzg2l-csi2.yaml | 149 ++++++++++++++++++
> > 1 file changed, 149 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml b/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml
> > new file mode 100644
> > index 000000000000..f82f88c096df
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml
> > @@ -0,0 +1,149 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +# Copyright (C) 2022 Renesas Electronics Corp.
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/media/renesas,rzg2l-csi2.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Renesas RZ/G2L (and alike SoC's) MIPI CSI-2 receiver
> > +
> > +maintainers:
> > + - Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
> > +
> > +description:
> > + The CSI-2 receiver device provides MIPI CSI-2 capabilities for the Renesas RZ/G2L
> > + (and alike SoCs). MIPI CSI-2 is part of the CRU block which is used in conjunction
> > + with the Image Processing module, which provides the video capture capabilities.
> > +
> > +properties:
> > + compatible:
> > + oneOf:
> > + - items:
> > + - enum:
> > + - renesas,r9a07g044-csi2 # RZ/G2{L,LC}
> > + - renesas,r9a07g054-csi2 # RZ/V2L
> > + - const: renesas,rzg2l-csi2
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + interrupts:
> > + maxItems: 1
> > +
> > + interrupt-names:
> > + const: csi2_link
> > +
> > + clocks:
> > + items:
> > + - description: Internal clock for connecting CRU and MIPI
> > + - description: CRU Main clock
> > + - description: CPU Register access clock
> > +
> > + clock-names:
> > + items:
> > + - const: sysclk
> > + - const: vclk
> > + - const: pclk
> > +
> > + power-domains:
> > + maxItems: 1
> > +
> > + resets:
> > + items:
> > + - description: CRU_CMN_RSTB reset terminal
> > +
> > + reset-names:
> > + const: cmn-rstb
> > +
> > + ports:
> > + $ref: /schemas/graph.yaml#/properties/ports
> > +
> > + properties:
> > + port@0:
> > + $ref: /schemas/graph.yaml#/$defs/port-base
> > + unevaluatedProperties: false
> > + description:
> > + Input port node, single endpoint describing the CSI-2 transmitter.
> > +
> > + properties:
> > + endpoint:
> > + $ref: video-interfaces.yaml#
> > + unevaluatedProperties: false
> > +
> > + properties:
> > + data-lanes:
> > + minItems: 1
> > + maxItems: 4
> > + items:
> > + maximum: 4
> > +
> > + required:
> > + - clock-lanes
> > + - data-lanes
> > +
> > + port@1:
> > + $ref: /schemas/graph.yaml#/properties/port
> > + description:
> > + Output port node, Image Processing block connected to the CSI-2 receiver.
> > +
> > + required:
> > + - port@0
> > + - port@1
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - interrupts
> > + - clocks
> > + - clock-names
> > + - power-domains
> > + - resets
> > + - reset-names
> > + - ports
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/clock/r9a07g044-cpg.h>
> > + #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +
> > + csi20: csi2@...30400 {
>
> Node name just "csi"
>
> https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
>
OK will replace it with csi.
>
> > + compatible = "renesas,r9a07g044-csi2", "renesas,rzg2l-csi2";
> > + reg = <0x10830400 0xfc00>;
>
> Please use 4-space indentation for example DTS.
>
Sure will do.
Cheers,
Prabhakar
> > + interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&cpg CPG_MOD R9A07G044_CRU_SYSCLK>,
> > + <&cpg CPG_MOD R9A07G044_CRU_VCLK>,
> > + <&cpg CPG_MOD R9A07G044_CRU_PCLK>;
> > + clock-names = "sysclk", "vclk", "pclk";
> > + power-domains = <&cpg>;
> > + resets = <&cpg R9A07G044_CRU_CMN_RSTB>;
> > + reset-names = "cmn-rstb";
> > +
> > + ports {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + port@0 {
> > + reg = <0>;
> > +
> > + csi2_in: endpoint {
> > + clock-lanes = <0>;
> > + data-lanes = <1 2>;
> > + remote-endpoint = <&ov5645_ep>;
> > + };
> > + };
> > +
> > + port@1 {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + reg = <1>;
> > +
> > + csi2cru: endpoint@0 {
> > + reg = <0>;
> > + remote-endpoint = <&crucsi2>;
> > + };
> > + };
> > + };
> > + };
>
>
> Best regards,
> Krzysztof
Powered by blists - more mailing lists