linux-kernel - Re: [PATCH 3/7] arm64: dts: imx93: add s4 mu node

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <ccf4194e-e8b5-d229-b060-864d1b3b2cd4@linaro.org>
Date:   Fri, 12 Aug 2022 13:07:57 +0300
From:   Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To:     "Peng Fan (OSS)" <peng.fan@....nxp.com>, robh+dt@...nel.org,
        krzysztof.kozlowski+dt@...aro.org, shawnguo@...nel.org,
        s.hauer@...gutronix.de
Cc:     kernel@...gutronix.de, festevam@...il.com, linux-imx@....com,
        devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-kernel@...r.kernel.org, Peng Fan <peng.fan@....com>,
        Ye Li <ye.li@....com>, Jacky Bai <ping.bai@....com>
Subject: Re: [PATCH 3/7] arm64: dts: imx93: add s4 mu node

On 12/08/2022 10:46, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan@....com>
> 
> Add s4 mu node for sentinel communication
> 
> Reviewed-by: Ye Li <ye.li@....com>
> Reviewed-by: Jacky Bai <ping.bai@....com>
> Signed-off-by: Peng Fan <peng.fan@....com>
> ---
>  arch/arm64/boot/dts/freescale/imx93.dtsi | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi
> index 26d5ce4a5f2c..dd76472ced46 100644
> --- a/arch/arm64/boot/dts/freescale/imx93.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
> @@ -342,5 +342,15 @@ gpio1: gpio@...00080 {
>  			clock-names = "gpio", "port";
>  			gpio-ranges = <&iomuxc 0 0 32>;
>  		};
> +
> +		s4muap: mailbox@...20000 {
> +			compatible = "fsl,imx93-mu-s4";
> +			reg = <0x47520000 0x10000>;
> +			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "txirq", "rxirq";
> +			#mbox-cells = <2>;
> +			status = "okay";

No need for status.

Best regards,
Krzysztof