[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1660502102.287520.546324.nullmailer@robh.at.kernel.org>
Date: Sun, 14 Aug 2022 12:35:02 -0600
From: Rob Herring <robh@...nel.org>
To: Liu Ying <victor.liu@....com>
Cc: gregkh@...uxfoundation.org, linux-arm-kernel@...ts.infradead.org,
kernel@...gutronix.de, festevam@...il.com,
krzysztof.kozlowski@...aro.org, saravanak@...gle.com,
geert+renesas@...der.be, robh+dt@...nel.org,
s.hauer@...gutronix.de, linux-imx@....com,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
shawnguo@...nel.org, krzysztof.kozlowski+dt@...aro.org
Subject: Re: [PATCH v4 2/2] dt-bindings: bus: Add Freescale i.MX8qxp pixel link MSI bus binding
On Sun, 14 Aug 2022 15:43:38 +0800, Liu Ying wrote:
> Freescale i.MX8qxp pixel link MSI bus is a simple memory-mapped bus.
> It is used to access peripherals in i.MX8qm/qxp imaging, LVDS, MIPI
> DSI and HDMI TX subsystems, like I2C controller, PWM controller,
> MIPI DSI controller and Control and Status Registers (CSR) module.
>
> Reference simple-pm-bus bindings and add Freescale i.MX8qxp pixel
> link MSI bus specific bindings.
>
> Signed-off-by: Liu Ying <victor.liu@....com>
> ---
> v3->v4:
> * Add child nodes in the example MSI bus node of the MSI bus dt-binding. (Krzysztof)
>
> v2->v3:
> * Add a pattern property to allow child nodes. (Rob)
>
> v1->v2:
> Address Krzysztof's comments:
> * Add a select to explicitly select the MSI bus dt-binding.
> * List 'simple-pm-bus' explicitly as one item of compatible strings.
> * Require compatible and reg properties.
> * Put reg property just after compatible property in example.
>
> .../bus/fsl,imx8qxp-pixel-link-msi-bus.yaml | 232 ++++++++++++++++++
> 1 file changed, 232 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/bus/fsl,imx8qxp-pixel-link-msi-bus.yaml
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/bus/fsl,imx8qxp-pixel-link-msi-bus.example.dtb:0:0: /example-0/bus@...00000/syscon@...21000: failed to match any schema with compatible: ['fsl,imx8qxp-mipi-lvds-csr', 'syscon', 'simple-mfd']
Documentation/devicetree/bindings/bus/fsl,imx8qxp-pixel-link-msi-bus.example.dtb:0:0: /example-0/bus@...00000/syscon@...21000/pxl2dpi: failed to match any schema with compatible: ['fsl,imx8qxp-pxl2dpi']
Documentation/devicetree/bindings/bus/fsl,imx8qxp-pixel-link-msi-bus.example.dtb:0:0: /example-0/bus@...00000/syscon@...21000/ldb: failed to match any schema with compatible: ['fsl,imx8qxp-ldb']
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/patch/
This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit.
Powered by blists - more mailing lists