[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAHNYxRzRgqXPq0s3Pop_t0K+yAyO4MX1D1jY0buqw7s8kv0F=A@mail.gmail.com>
Date: Thu, 18 Aug 2022 10:43:17 -0700
From: Alexandru M Stan <amstan@...omium.org>
To: "Joseph S. Barrera III" <joebar@...omium.org>
Cc: linux-arm-msm@...r.kernel.org, Stephen Boyd <swboyd@...omium.org>,
Doug Anderson <dianders@...omium.org>,
Judy Hsiao <judyhsiao@...omium.org>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Konrad Dybcio <konrad.dybcio@...ainline.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>,
linux-kernel <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] arm64: dts: qcom: sc7180: Add sleep state for alc5682 codec
On Thu, Aug 18, 2022 at 8:42 AM Joseph S. Barrera III
<joebar@...omium.org> wrote:
>
> Add sleep state to acl5682. In default, gpio28 (HP_IRQ) is bias-pull-up.
> To save power, in the new sleep state, gpio28 is bias-disable.
>
> sleeping, /sys/kernel/debug/gpio shows gpio28 as "no pull". When codec
> is awake (microphone plugged in and in use), it shows gpio28 as "pull up".
>
> Signed-off-by: Joseph S. Barrera III <joebar@...omium.org>
> ---
>
> arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 15 ++++++++++++++-
> 1 file changed, 14 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
> index b5f534db135a..94dd6c34d997 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
> @@ -755,8 +755,9 @@ hp_i2c: &i2c9 {
> alc5682: codec@1a {
> compatible = "realtek,rt5682i";
> reg = <0x1a>;
> - pinctrl-names = "default";
> + pinctrl-names = "default", "sleep";
> pinctrl-0 = <&hp_irq>;
> + pinctrl-1 = <&hp_sleep>;
>
> #sound-dai-cells = <1>;
>
> @@ -1336,6 +1337,18 @@ pinconf {
> };
> };
>
> + hp_sleep: hp-sleep {
> + pinmux {
> + pins = "gpio28";
> + function = "gpio";
> + };
> +
> + pinconf {
> + pins = "gpio28";
> + bias-disable;
> + };
> + };
> +
> pen_irq_l: pen-irq-l {
> pinmux {
> pins = "gpio21";
> --
> 2.31.0
>
Thanks, this should save us a current leak.
Reviewed-by: Alexandru Stan <amstan@...omium.org>
Powered by blists - more mailing lists