linux-kernel - Re: [PATCH RFC net-next 0/3] net: vlan: fix bridge binding behavior and add selftests

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <46deef15-a67b-91ad-bc47-1b1306d1d654@blackwall.org>
Date:   Thu, 18 Aug 2022 15:00:22 +0300
From:   Nikolay Aleksandrov <razor@...ckwall.org>
To:     Sevinj Aghayeva <sevinj.aghayeva@...il.com>
Cc:     netdev@...r.kernel.org, aroulin@...dia.com, sbrivio@...hat.com,
        roopa@...dia.com, "David S. Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>, linux-kernel@...r.kernel.org,
        bridge@...ts.linux-foundation.org
Subject: Re: [PATCH RFC net-next 0/3] net: vlan: fix bridge binding behavior
 and add selftests

On 18/08/2022 14:50, Sevinj Aghayeva wrote:
> On Sun, Aug 14, 2022 at 3:38 AM Nikolay Aleksandrov <razor@...ckwall.org> wrote:
>>
>> On 12/08/2022 18:30, Sevinj Aghayeva wrote:
>>> On Wed, Aug 10, 2022 at 4:54 AM Nikolay Aleksandrov <razor@...ckwall.org> wrote:
>>>>
>>>> On 10/08/2022 06:11, Sevinj Aghayeva wrote:
>>>>> When bridge binding is enabled for a vlan interface, it is expected
>>>>> that the link state of the vlan interface will track the subset of the
>>>>> ports that are also members of the corresponding vlan, rather than
>>>>> that of all ports.
>>>>>
>>>>> Currently, this feature works as expected when a vlan interface is
>>>>> created with bridge binding enabled:
>>>>>
>>>>>   ip link add link br name vlan10 type vlan id 10 protocol 802.1q \
>>>>>         bridge_binding on
>>>>>
>>>>> However, the feature does not work when a vlan interface is created
>>>>> with bridge binding disabled, and then enabled later:
>>>>>
>>>>>   ip link add link br name vlan10 type vlan id 10 protocol 802.1q \
>>>>>         bridge_binding off
>>>>>   ip link set vlan10 type vlan bridge_binding on
>>>>>
>>>>> After these two commands, the link state of the vlan interface
>>>>> continues to track that of all ports, which is inconsistent and
>>>>> confusing to users. This series fixes this bug and introduces two
>>>>> tests for the valid behavior.
>>>>>
>>>>> Sevinj Aghayeva (3):
>>>>>   net: core: export call_netdevice_notifiers_info
>>>>>   net: 8021q: fix bridge binding behavior for vlan interfaces
>>>>>   selftests: net: tests for bridge binding behavior
>>>>>
>>>>>  include/linux/netdevice.h                     |   2 +
>>>>>  net/8021q/vlan.h                              |   2 +-
>>>>>  net/8021q/vlan_dev.c                          |  25 ++-
>>>>>  net/core/dev.c                                |   7 +-
>>>>>  tools/testing/selftests/net/Makefile          |   1 +
>>>>>  .../selftests/net/bridge_vlan_binding_test.sh | 143 ++++++++++++++++++
>>>>>  6 files changed, 172 insertions(+), 8 deletions(-)
>>>>>  create mode 100755 tools/testing/selftests/net/bridge_vlan_binding_test.sh
>>>>>
>>>>
>>>> Hi,
>>>> NETDEV_CHANGE event is already propagated when the vlan changes flags,
>>>> NETDEV_CHANGEUPPER is used when the devices' relationship changes not their flags.
>>>> The only problem you have to figure out is that the flag has changed. The fix itself
>>>> must be done within the bridge, not 8021q. You can figure it out based on current bridge
>>>> loose binding state and the vlan's changed state, again in the bridge's NETDEV_CHANGE
>>>> handler. Unfortunately the proper fix is much more involved and will need new
>>>> infra, you'll have to track the loose binding vlans in the bridge. To do that you should
>>>> add logic that reflects the current vlans' loose binding state *only* for vlans that also
>>>> exist in the bridge, the rest which are upper should be carrier off if they have the loose
>>>> binding flag set.
>>>>
>>>> Alternatively you can add a new NETDEV_ notifier (using something similar to struct netdev_notifier_pre_changeaddr_info)
>>>> and add link type-specific space (e.g. union of link type-specific structs) in the struct which will contain
>>>> what changed for 8021q and will be properly interpreted by the bridge. The downside is that we'll generate
>>>> 2 notifications when changing the loose binding flag, but on the bright side won't have to track anything
>>>> in the bridge, just handle the new notifier type. This might be the easiest path, the fix is still in
>>>> the bridge though, the 8021q module just needs to fill in the new struct and emit the notification on
>>>> any loose binding changes, the bridge must decide if it should process it (i.e. based on upper/lower
>>>> relationship). Such notifier can be also re-used by other link types to propagate link-type specific
>>>> changes.
>>
>> Hi,
>>
>>>
>>> Hi Nik,
>>>
>>> Can you please clarify the following?
>>>
>>> 1) should the new NETDEV_ notifier be about the vlan device and not
>>> the bridge? That is, should I handle it in br_device_event?
>>
>> Yes, it should be about the vlan device (i.e. the target device that changes its state).
> 
> Hi Nik,
> 
> I implemented this and tried to handle NETDEV_CHANGE_DETAILS in
> br_device_event, but there's a check there that performs early return
> if the device is not a bridge port:
> 
> https://github.com/torvalds/linux/blob/master/net/bridge/br.c#L55-L57
> 
> Should I add a new function before that check, e.g.
> br_vlan_device_event, and handle vlan device events there, similar to
> br_vlan_bridge_event? Or do you have a better idea?
> 
> Thanks
> 

Hi,
Handling all vlan device-related changes in br_vlan_device_event() sounds good to me.
Please add it to br_vlan.c.

Thanks,
 Nik