[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220819131152.6513-1-pali@kernel.org>
Date: Fri, 19 Aug 2022 15:11:52 +0200
From: Pali Rohár <pali@...nel.org>
To: Andrew Lunn <andrew@...n.ch>,
Gregory Clement <gregory.clement@...tlin.com>,
Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Marek Behun <marek.behun@....cz>
Cc: linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH] ARM: dts: turris-omnia: Add mcu node
At i2c address 0x2a is MCU command interface which provides access to GPIOs
connected to Turris Omnia MCU. So define mcu node in Turris Omnia DTS file.
Signed-off-by: Pali Rohár <pali@...nel.org>
---
Same change was already sent to U-Boot project together with driver. As
Turris Omnia DTS file is shared between Linux kernel U-Boot, I'm sending
this change also in Linux. There is a plan to write also Linux driver for
Turris Omnia MCU, like there is already in U-Boot.
https://source.denx.de/u-boot/u-boot/-/commit/832738974806e6264a3d0ac2aaa92d0f662fd128
https://source.denx.de/u-boot/u-boot/-/blob/master/drivers/gpio/turris_omnia_mcu.c
---
arch/arm/boot/dts/armada-385-turris-omnia.dts | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/armada-385-turris-omnia.dts b/arch/arm/boot/dts/armada-385-turris-omnia.dts
index f4878df39753..f655e9229d68 100644
--- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
@@ -184,7 +184,13 @@
#size-cells = <0>;
reg = <0>;
- /* STM32F0 command interface at address 0x2a */
+ /* MCU command i2c API */
+ mcu: mcu@2a {
+ compatible = "cznic,turris-omnia-mcu";
+ reg = <0x2a>;
+ gpio-controller;
+ #gpio-cells = <3>;
+ };
led-controller@2b {
compatible = "cznic,turris-omnia-leds";
--
2.20.1
Powered by blists - more mailing lists