| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <d2506f8d-eb18-400e-f3d8-cbf3066ffc79@huawei.com>
Date: Wed, 24 Aug 2022 17:46:54 +0800
From: Kefeng Wang <wangkefeng.wang@...wei.com>
To: Yicong Yang <yangyicong@...wei.com>, <akpm@...ux-foundation.org>,
<linux-mm@...ck.org>, <linux-arm-kernel@...ts.infradead.org>,
<x86@...nel.org>, <catalin.marinas@....com>, <will@...nel.org>,
<linux-doc@...r.kernel.org>
CC: <corbet@....net>, <peterz@...radead.org>, <arnd@...db.de>,
<linux-kernel@...r.kernel.org>, <darren@...amperecomputing.com>,
<yangyicong@...ilicon.com>, <huzhanyuan@...o.com>,
<lipeifeng@...o.com>, <zhangshiming@...o.com>, <guojian@...o.com>,
<realmz6@...il.com>, <linux-mips@...r.kernel.org>,
<openrisc@...ts.librecores.org>, <linuxppc-dev@...ts.ozlabs.org>,
<linux-riscv@...ts.infradead.org>, <linux-s390@...r.kernel.org>,
Barry Song <21cnbao@...il.com>, <xhao@...ux.alibaba.com>,
<prime.zeng@...ilicon.com>, <anshuman.khandual@....com>,
Barry Song <v-songbaohua@...o.com>,
Nadav Amit <namit@...are.com>, Mel Gorman <mgorman@...e.de>
Subject: Re: [PATCH v3 4/4] arm64: support batched/deferred tlb shootdown
during page reclamation
On 2022/8/22 16:21, Yicong Yang wrote:
> From: Barry Song <v-songbaohua@...o.com>
>
> on x86, batched and deferred tlb shootdown has lead to 90%
> performance increase on tlb shootdown. on arm64, HW can do
> tlb shootdown without software IPI. But sync tlbi is still
> quite expensive.
>
> Even running a simplest program which requires swapout can
> prove this is true,
> #include <sys/types.h>
> #include <unistd.h>
> #include <sys/mman.h>
> #include <string.h>
>
> int main()
> {
> #define SIZE (1 * 1024 * 1024)
> volatile unsigned char *p = mmap(NULL, SIZE, PROT_READ | PROT_WRITE,
> MAP_SHARED | MAP_ANONYMOUS, -1, 0);
>
> memset(p, 0x88, SIZE);
>
> for (int k = 0; k < 10000; k++) {
> /* swap in */
> for (int i = 0; i < SIZE; i += 4096) {
> (void)p[i];
> }
>
> /* swap out */
> madvise(p, SIZE, MADV_PAGEOUT);
> }
> }
>
> Perf result on snapdragon 888 with 8 cores by using zRAM
> as the swap block device.
>
> ~ # perf record taskset -c 4 ./a.out
> [ perf record: Woken up 10 times to write data ]
> [ perf record: Captured and wrote 2.297 MB perf.data (60084 samples) ]
> ~ # perf report
> # To display the perf.data header info, please use --header/--header-only options.
> # To display the perf.data header info, please use --header/--header-only options.
> #
> #
> # Total Lost Samples: 0
> #
> # Samples: 60K of event 'cycles'
> # Event count (approx.): 35706225414
> #
> # Overhead Command Shared Object Symbol
> # ........ ....... ................. .............................................................................
> #
> 21.07% a.out [kernel.kallsyms] [k] _raw_spin_unlock_irq
> 8.23% a.out [kernel.kallsyms] [k] _raw_spin_unlock_irqrestore
> 6.67% a.out [kernel.kallsyms] [k] filemap_map_pages
> 6.16% a.out [kernel.kallsyms] [k] __zram_bvec_write
> 5.36% a.out [kernel.kallsyms] [k] ptep_clear_flush
> 3.71% a.out [kernel.kallsyms] [k] _raw_spin_lock
> 3.49% a.out [kernel.kallsyms] [k] memset64
> 1.63% a.out [kernel.kallsyms] [k] clear_page
> 1.42% a.out [kernel.kallsyms] [k] _raw_spin_unlock
> 1.26% a.out [kernel.kallsyms] [k] mod_zone_state.llvm.8525150236079521930
> 1.23% a.out [kernel.kallsyms] [k] xas_load
> 1.15% a.out [kernel.kallsyms] [k] zram_slot_lock
>
> ptep_clear_flush() takes 5.36% CPU in the micro-benchmark
> swapping in/out a page mapped by only one process. If the
> page is mapped by multiple processes, typically, like more
> than 100 on a phone, the overhead would be much higher as
> we have to run tlb flush 100 times for one single page.
> Plus, tlb flush overhead will increase with the number
> of CPU cores due to the bad scalability of tlb shootdown
> in HW, so those ARM64 servers should expect much higher
> overhead.
>
> Further perf annonate shows 95% cpu time of ptep_clear_flush
> is actually used by the final dsb() to wait for the completion
> of tlb flush. This provides us a very good chance to leverage
> the existing batched tlb in kernel. The minimum modification
> is that we only send async tlbi in the first stage and we send
> dsb while we have to sync in the second stage.
>
> With the above simplest micro benchmark, collapsed time to
> finish the program decreases around 5%.
>
> Typical collapsed time w/o patch:
> ~ # time taskset -c 4 ./a.out
> 0.21user 14.34system 0:14.69elapsed
> w/ patch:
> ~ # time taskset -c 4 ./a.out
> 0.22user 13.45system 0:13.80elapsed
>
> Also, Yicong Yang added the following observation.
> Tested with benchmark in the commit on Kunpeng920 arm64 server,
> observed an improvement around 12.5% with command
> `time ./swap_bench`.
> w/o w/
> real 0m13.460s 0m11.771s
> user 0m0.248s 0m0.279s
> sys 0m12.039s 0m11.458s
>
> Originally it's noticed a 16.99% overhead of ptep_clear_flush()
> which has been eliminated by this patch:
>
> [root@...alhost yang]# perf record -- ./swap_bench && perf report
> [...]
> 16.99% swap_bench [kernel.kallsyms] [k] ptep_clear_flush
>
> Cc: Jonathan Corbet <corbet@....net>
> Cc: Nadav Amit <namit@...are.com>
> Cc: Mel Gorman <mgorman@...e.de>
> Tested-by: Yicong Yang <yangyicong@...ilicon.com>
> Tested-by: Xin Hao <xhao@...ux.alibaba.com>
> Signed-off-by: Barry Song <v-songbaohua@...o.com>
> Signed-off-by: Yicong Yang <yangyicong@...ilicon.com>
I tested on my kunpeng board too, looks good for now.
Reviewed-by: Kefeng Wang <wangkefeng.wang@...wei.com>
> ---
> .../features/vm/TLB/arch-support.txt | 2 +-
> arch/arm64/Kconfig | 1 +
> arch/arm64/include/asm/tlbbatch.h | 12 ++++++++
> arch/arm64/include/asm/tlbflush.h | 28 +++++++++++++++++--
> 4 files changed, 40 insertions(+), 3 deletions(-)
> create mode 100644 arch/arm64/include/asm/tlbbatch.h
>
> diff --git a/Documentation/features/vm/TLB/arch-support.txt b/Documentation/features/vm/TLB/arch-support.txt
> index 1c009312b9c1..2caf815d7c6c 100644
> --- a/Documentation/features/vm/TLB/arch-support.txt
> +++ b/Documentation/features/vm/TLB/arch-support.txt
> @@ -9,7 +9,7 @@
> | alpha: | TODO |
> | arc: | TODO |
> | arm: | TODO |
> - | arm64: | TODO |
> + | arm64: | ok |
> | csky: | TODO |
> | hexagon: | TODO |
> | ia64: | TODO |
> diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
> index 571cc234d0b3..09d45cd6d665 100644
> --- a/arch/arm64/Kconfig
> +++ b/arch/arm64/Kconfig
> @@ -93,6 +93,7 @@ config ARM64
> select ARCH_SUPPORTS_INT128 if CC_HAS_INT128
> select ARCH_SUPPORTS_NUMA_BALANCING
> select ARCH_SUPPORTS_PAGE_TABLE_CHECK
> + select ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH
> select ARCH_WANT_COMPAT_IPC_PARSE_VERSION if COMPAT
> select ARCH_WANT_DEFAULT_BPF_JIT
> select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT
> diff --git a/arch/arm64/include/asm/tlbbatch.h b/arch/arm64/include/asm/tlbbatch.h
> new file mode 100644
> index 000000000000..fedb0b87b8db
> --- /dev/null
> +++ b/arch/arm64/include/asm/tlbbatch.h
> @@ -0,0 +1,12 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +#ifndef _ARCH_ARM64_TLBBATCH_H
> +#define _ARCH_ARM64_TLBBATCH_H
> +
> +struct arch_tlbflush_unmap_batch {
> + /*
> + * For arm64, HW can do tlb shootdown, so we don't
> + * need to record cpumask for sending IPI
> + */
> +};
> +
> +#endif /* _ARCH_ARM64_TLBBATCH_H */
> diff --git a/arch/arm64/include/asm/tlbflush.h b/arch/arm64/include/asm/tlbflush.h
> index 412a3b9a3c25..23cbc987321a 100644
> --- a/arch/arm64/include/asm/tlbflush.h
> +++ b/arch/arm64/include/asm/tlbflush.h
> @@ -254,17 +254,24 @@ static inline void flush_tlb_mm(struct mm_struct *mm)
> dsb(ish);
> }
>
> -static inline void flush_tlb_page_nosync(struct vm_area_struct *vma,
> +
> +static inline void __flush_tlb_page_nosync(struct mm_struct *mm,
> unsigned long uaddr)
> {
> unsigned long addr;
>
> dsb(ishst);
> - addr = __TLBI_VADDR(uaddr, ASID(vma->vm_mm));
> + addr = __TLBI_VADDR(uaddr, ASID(mm));
> __tlbi(vale1is, addr);
> __tlbi_user(vale1is, addr);
> }
>
> +static inline void flush_tlb_page_nosync(struct vm_area_struct *vma,
> + unsigned long uaddr)
> +{
> + return __flush_tlb_page_nosync(vma->vm_mm, uaddr);
> +}
> +
> static inline void flush_tlb_page(struct vm_area_struct *vma,
> unsigned long uaddr)
> {
> @@ -272,6 +279,23 @@ static inline void flush_tlb_page(struct vm_area_struct *vma,
> dsb(ish);
> }
>
> +static inline bool arch_tlbbatch_should_defer(struct mm_struct *mm)
> +{
> + return true;
> +}
> +
> +static inline void arch_tlbbatch_add_mm(struct arch_tlbflush_unmap_batch *batch,
> + struct mm_struct *mm,
> + unsigned long uaddr)
> +{
> + __flush_tlb_page_nosync(mm, uaddr);
> +}
> +
> +static inline void arch_tlbbatch_flush(struct arch_tlbflush_unmap_batch *batch)
> +{
> + dsb(ish);
> +}
> +
> /*
> * This is meant to avoid soft lock-ups on large TLB flushing ranges and not
> * necessarily a performance improvement.
Powered by blists - more mailing lists