[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <trinity-9006aaf2-5bc2-467c-a86e-ba43efc692e6-1661591668494@3c-app-gmx-bs16>
Date: Sat, 27 Aug 2022 11:14:28 +0200
From: Frank Wunderlich <frank-w@...lic-files.de>
To: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Cc: Frank Wunderlich <linux@...web.de>,
linux-rockchip@...ts.infradead.org,
Kishon Vijay Abraham I <kishon@...com>,
Vinod Koul <vkoul@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Heiko Stuebner <heiko@...ech.de>,
Philipp Zabel <p.zabel@...gutronix.de>,
Yifeng Zhao <yifeng.zhao@...k-chips.com>,
Johan Jonker <jbx6244@...il.com>,
Peter Geis <pgwipeout@...il.com>,
Simon Xue <xxm@...k-chips.com>, Liang Chen <cl@...k-chips.com>,
Shawn Lin <shawn.lin@...k-chips.com>,
linux-phy@...ts.infradead.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Aw: Re: Re: [PATCH v5 5/5] arm64: dts: rockchip: Add PCIe v3 nodes
to BPI-R2-Pro
> Gesendet: Samstag, 27. August 2022 um 10:56 Uhr
> Von: "Krzysztof Kozlowski" <krzysztof.kozlowski@...aro.org>
> On 27/08/2022 11:50, Frank Wunderlich wrote:
> > Hi
> >
> >> Gesendet: Freitag, 26. August 2022 um 08:50 Uhr
> >> Von: "Krzysztof Kozlowski" <krzysztof.kozlowski@...aro.org>
> >> On 25/08/2022 22:38, Frank Wunderlich wrote:
> >>> From: Frank Wunderlich <frank-w@...lic-files.de>
> >
> >>> diff --git a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
> >>> index 93d383b8be87..40b90c052634 100644
> >>> --- a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
> >>> +++ b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
> >>> @@ -86,6 +86,66 @@ vcc5v0_sys: vcc5v0-sys {
> >>> vin-supply = <&dc_12v>;
> >>> };
> >>>
> >>> + pcie30_avdd0v9: pcie30-avdd0v9 {
> >>
> >> Use consistent naming, so if other nodes have "regulator" suffix, use it
> >> here as well.
> >
> > only these 3 new have the suffix:
> >
> > vcc3v3_pi6c_05: vcc3v3-pi6c-05-regulator
> > vcc3v3_minipcie: vcc3v3-minipcie-regulator
> > vcc3v3_ngff: vcc3v3-ngff-regulator
> >
> > so i would drop it there...
> >
> > so i end up with (including existing ones to compare):
> >
> > vcc3v3_sys: vcc3v3-sys
> > vcc5v0_sys: vcc5v0-sys
> > pcie30_avdd0v9: pcie30-avdd0v9
> > pcie30_avdd1v8: pcie30-avdd1v8
> > vcc3v3_pi6c_05: vcc3v3-pi6c-05
> > vcc3v3_minipcie: vcc3v3-minipcie
> > vcc3v3_ngff: vcc3v3-ngff
> > vcc5v0_usb: vcc5v0_usb
> > vcc5v0_usb_host: vcc5v0-usb-host
> > vcc5v0_usb_otg: vcc5v0-usb-otg
> >
> > is this ok?
> >
> > maybe swap avdd* and pcie30 part to have voltage in front of function.
> >
>
> I prefer all of them have regulator suffix. I think reasonable is also
> to rename the old ones and then add new ones with suffix.
ok, will change these to add -regulator in name (not label). and then rename the others in separate Patch outside of the series.
so basicly here
- pcie30_avdd0v9: pcie30-avdd0v9 {
+ pcie30_avdd0v9: pcie30-avdd0v9-regulator {
- pcie30_avdd1v8: pcie30-avdd1v8 {
+ pcie30_avdd1v8: pcie30-avdd1v8-regulator {
how about the swapping of pcie30 and the avddXvY? In Schematic they are named PCIE30_AVDD_0V9 / PCIE30_AVDD_1V8, so better leave this?
avdd0v9-pcie30 will be more similar to the other regulators, but inconsistent with Schematic.
regards Frank
Powered by blists - more mailing lists